Are Honda Civics 4×100? What to know about Civic wheel bolt patterns by year and trim

Many Honda Civics are 4×100, especially mainstream models from 1984 through 2005. Earlier Civics (1973–1983) use 4×120, most 2006–present non-Type R Civics use 5×114.3, and modern Civic Type R models use 5×120. Because patterns vary by generation, market, and performance trim, it’s best to confirm by model year and variant.

What “4×100” means

“4×100” describes a wheel bolt pattern with four lug holes spaced on a 100 mm diameter circle (Pitch Circle Diameter, or PCD). To fit without adapters, the wheel’s bolt pattern must match the car’s hub, along with the correct center bore and offset.

Civics that are 4×100

The following Civic generations and trims are widely known to use the 4×100 bolt pattern, covering the popular tuner eras of the late 1980s through the early 2000s. Regional variations are rare in this period for non-performance trims.

• 3rd gen (1984–1987): All mainline Civic models — 4×100.
• 4th gen (1988–1991, EF): Hatchback, sedan, wagon — 4×100.
• 5th gen (1992–1995, EG/EH): Coupe, sedan, hatchback — 4×100; Civic del Sol (1993–1997) also 4×100.
• 6th gen (1996–2000, EK/EJ): Most trims — 4×100; note the EK9 Type R exception (see below).
• 7th gen (2001–2005, EM/ES/EP): Most trims, including the U.S.-market EP3 Si — 4×100; European/Japanese EP3 Type R is an exception.

If you own a 1984–2005 non-Type R Civic, there’s a strong chance your car is 4×100. Always double-check, especially if hubs, brakes, or knuckles have been swapped.

Civics that are not 4×100 (other patterns by era and trim)

Several Civic eras and performance variants use different patterns. This is especially true for early classics, modern generations, and all Type R models.

• Classic Civics:
  

  • 1st gen (1973–1979): 4×120
  • 2nd gen (1980–1983): 4×120

• Modern non-Type R Civics:
  

  • 8th gen (2006–2011, including Si): 5×114.3
  • 9th gen (2012–2015): 5×114.3
  • 10th gen (2016–2021): 5×114.3
  • 11th gen (2022–present): 5×114.3

• Civic Type R (all years use 5-lug, not 4×100):
  

  • EK9 Type R (1997–2000): 5×114.3
  • EP3 Type R (2001–2005, EU/JPN): 5×114.3
  • FD2/FN2 Type R (2007–2011): 5×114.3
  • FK2 Type R (2015–2017, EU): 5×120
  • FK8 Type R (2017–2021): 5×120
  • FL5 Type R (2023–present): 5×120

From 2006 onward, mainstream Civics standardized on 5×114.3 in most markets, while Type R models have used 5×114.3 or 5×120 depending on generation. Early classic Civics (pre-1984) are 4×120 and require special attention when sourcing wheels.

Quick reference by generation

Use this snapshot to quickly identify the likely pattern for your Civic generation; confirm specific trims (especially performance variants) before buying wheels.

• 1st gen (1973–1979): 4×120
• 2nd gen (1980–1983): 4×120
• 3rd gen (1984–1987): 4×100
• 4th gen (1988–1991): 4×100
• 5th gen (1992–1995): 4×100
• 6th gen (1996–2000): 4×100 (EK9 Type R: 5×114.3)
• 7th gen (2001–2005): 4×100 (EP3 Type R EU/JPN: 5×114.3)
• 8th gen (2006–2011): 5×114.3 (incl. Si)
• 9th gen (2012–2015): 5×114.3
• 10th gen (2016–2021): 5×114.3; Type R FK8: 5×120
• 11th gen (2022–present): 5×114.3; Type R FL5: 5×120

This overview covers the common factory specifications; local market variations can exist, and prior modifications can change what’s on your car today.

How to confirm your bolt pattern

Because wheels and hubs are often swapped in the used market, verifying your exact pattern before purchasing wheels is essential.

• Check the owner’s manual or the manufacturer’s online specifications for your exact trim and year.
• Count the studs and measure the PCD (for 4-lug, measure center-to-center across opposite holes; for 5-lug, use a PCD guide).
• Look up your VIN on a dealer parts system to see the original hub/knuckle specification.
• Inspect current components; aftermarket hub or brake conversions can change the pattern from stock.

Taking a moment to verify avoids costly returns and ensures proper fitment and safety.

Summary

Most standard Honda Civics from 1984–2005 use a 4×100 bolt pattern. Earlier classics (1973–1983) are 4×120, while 2006–present mainstream Civics are 5×114.3. Civic Type R models use 5-lug patterns—5×114.3 on earlier generations and 5×120 on recent ones (FK2, FK8, FL5). Always confirm by year, trim, and current hardware before buying wheels.

What Hondas have 4×100?

Compatibility and Suitability: The 4×100 bolt pattern is predominantly found in compact and subcompact Honda models, such as older Civic models, the Fit, CRX, Insight, Del Sol, Prelude, and City. It’s crucial to verify the bolt pattern for your specific vehicle model and year.

Are Honda Civics 4 wheel drive?

No, standard Honda Civics are front-wheel drive. While Honda has produced some 4WD/AWD Civics in the past (like the Civic wagon in the late 1980s), they are not currently offered in the standard Civic lineup. Some enthusiasts have converted Civics to all-wheel drive, but these are custom builds and not factory options. 
This video shows an 800 horsepower AWD Civic, highlighting the modifications needed for the conversion: 56sEast Coast GarageYouTube · Apr 17, 2025

What does the 4×100 bolt pattern fit?

The 4×100 rims fit numerous compact cars, hatchbacks, and models, including the 131B Evo, 141B Mystique, 145 S Encore, 147B Intake, and 18 Hellion. Get great deals on the 4×100 bolt pattern at Discounted Wheel Warehouse!

What lug pattern is a Honda Civic?

The Honda Civic’s lug pattern varies by model year, with older models (around 2001-2005) often using a 4×100 pattern, while most newer models (from the mid-2000s onward) use a 5×114.3 pattern. The premium Civic Type R models, for example, utilize a larger 5×120 pattern. To ensure correct fitment, it is essential to check the specific year and trim of your Civic.
 
How to identify your Civic’s lug pattern:

1. Locate your vehicle’s year and trim: Different years and models use different patterns. 
2. Check your owner’s manual: This is the most accurate source for your car’s specific information. 
3. Use online resources: Websites such as PRO Civic and Hulk Offsets provide detailed fitment guides by year and model. 
4. Count the lug nuts: A 5×114.3 pattern has five lug nuts, and the measurement across them is 114.3 millimeters. 

Common lug patterns for Honda Civics:

• 4×100: Used on some older models, such as the 2001-2005 generation. 
• 5×114.3: A very common pattern for many models from the mid-2000s to the present. 
• 5×120: A larger pattern found on certain premium models, like the Type R.