How Many Quarts of Oil Does a 2006 Honda Take?

It depends on the model and engine. Most 2006 Honda four-cylinder models take about 4.4 quarts with a filter, V6 models typically use around 4.5 quarts, the 2006 Civic 1.8L uses about 3.9 quarts, and performance models like the Civic Si and S2000 are closer to 5.8 quarts. Always confirm with your owner’s manual for the exact figure.

Why the Capacity Varies by Model and Engine

Oil capacity changes with engine design, oil pan size, and whether you replace the oil filter (which adds volume). In Honda’s 2006 lineup, compact models with smaller engines need less oil, mid-size and V6 models use a bit more, and high-performance engines use the largest volumes to ensure reliable lubrication under higher loads and temperatures.

Typical Oil Capacities for Popular 2006 Hondas (with filter)

The following list summarizes commonly referenced capacities for major 2006 Honda models in the U.S. market. Values are for an oil and filter change and include approximate liter equivalents.

• 2006 Civic 1.8L (R18): 3.9 quarts (≈3.7 liters)
• 2006 Civic Si 2.0L (K20Z3): about 5.8 quarts (≈5.5 liters)
• 2006 Accord 2.4L (K24): 4.4 quarts (≈4.2 liters)
• 2006 Accord 3.0L V6 (J30): about 4.5 quarts (≈4.3 liters)
• 2006 CR‑V 2.4L (K24): 4.4 quarts (≈4.2 liters)
• 2006 Element 2.4L (K24): 4.4 quarts (≈4.2 liters)
• 2006 Odyssey 3.5L V6 (J35): about 4.5 quarts (≈4.3 liters)
• 2006 Pilot 3.5L V6 (J35): about 4.5 quarts (≈4.3 liters)
• 2006 Ridgeline 3.5L V6 (J35): about 4.5 quarts (≈4.3 liters)
• 2006 S2000 2.2L (F22C1): about 5.8 quarts (≈5.5 liters)

These figures reflect typical service data and owner’s manual specs for oil-and-filter changes. If you do not replace the filter, the capacity is usually a few tenths of a quart less.

“With Filter” vs. “Without Filter”

Most published capacities assume you’re replacing the oil filter, which retains some oil. If you’re only draining and refilling without changing the filter, expect to add slightly less—often 0.2 to 0.4 quart less depending on the engine and filter size.

How to Confirm the Exact Capacity for Your 2006 Honda

Because trim levels and regional variations can affect specifications, it’s best to verify the exact capacity for your specific vehicle using one or more of the following sources.

1. Check your owner’s manual under “Engine Oil” or “Specifications.”
2. Look for the under‑hood emissions/specification label; some models list oil grade and capacity.
3. Use Honda’s official service information or a reputable parts catalog by entering your VIN.
4. Call a Honda dealer’s service department with your VIN for the precise capacity.

Confirming with your exact engine code and VIN eliminates guesswork, especially for less common trims or markets outside the U.S.

At-a-Glance Guidance

As a practical rule: if you have a 2006 Honda with a 2.4L four-cylinder (Accord, CR‑V, Element), plan for about 4.4 quarts; if it’s a 3.5L V6 (Odyssey, Pilot, Ridgeline), plan for about 4.5 quarts; a 2006 Civic 1.8L needs about 3.9 quarts; and performance models like the Civic Si and S2000 are near 5.8 quarts—then top off as needed after checking the dipstick.

Summary

There’s no single oil capacity for “a 2006 Honda.” Most four-cylinders take roughly 4.4 quarts, V6 models around 4.5 quarts, the 2006 Civic 1.8L about 3.9 quarts, and the Civic Si and S2000 about 5.8 quarts (all with filter). Check your owner’s manual or VIN-specific service data to confirm the exact amount for your vehicle.

How many quarts of oil for a 2006 Honda Civic?

A 2006 Honda Civic typically requires 3.9 quarts (3.7 liters) of oil with a filter change, according to AMSOIL. The recommended oil viscosity is 5W-20, according to AMSOIL. It’s always best to consult your owner’s manual for the most accurate information and to double-check the oil level after refilling.

How many quarts of oil for a 2006 Honda Accord?

The oil capacity for a 2006 Honda Accord depends on the engine size: the 4-cylinder (2.4L) engine requires about 4.2 to 4.4 quarts of oil with a filter change, while the 6-cylinder (3.0L) engine requires approximately 4.5 quarts of oil with a filter change. Always check your owner’s manual for the precise amount and to confirm your engine size before performing an oil change, and add oil slowly, checking the dipstick frequently to ensure the correct level. 
For a 4-cylinder (2.4L) engine: 

• Oil capacity: Approximately 4.2 to 4.4 quarts with a new filter.

For a 6-cylinder (3.0L) engine: 

• Oil capacity: Approximately 4.5 quarts with a new filter.

Important Notes:

• Always check the dipstick: After filling with oil, check the dipstick to confirm the oil level is correct. 
• Consult your owner’s manual: The best source for your specific vehicle’s oil capacity is the owner’s manual, which can provide definitive information. 
• Filter change: The specified capacities are for when you are also changing the oil filter. 
• Recommended oil: The recommended oil viscosity for these models is 5W-20, but always verify this in your owner’s manual. 

What oil does a 2006 Honda take?

For most 2006 Honda models, such as the Accord, Civic, CR-V, and Pilot, the recommended oil type is 5W-20 oil, though some specific Civic models like the Si use 5W-30, and very specific engine types might use 0W-20. It is always best to check your specific owner’s manual for the most accurate information regarding the correct oil type for your particular vehicle’s engine. 
Steps to find the correct oil:

1. 1. Locate your owner’s manual: The definitive source for your 2006 Honda’s specific oil type will be in the owner’s manual, typically under a section on “Maintenance” or “Engine Oil”. 
2. 2. Check the oil cap: For a quick reference, you can also look at the oil fill cap under the hood, as the recommended viscosity is often printed there. 
3. 3. Confirm the model and engine: Different models, and even different engines within the same model, can have slightly different oil requirements. 

Why it’s important to check:

• Engine longevity: . Opens in new tabUsing the correct oil type and viscosity ensures proper lubrication and protects your engine from wear and tear. 
• Fuel efficiency: . Opens in new tabThe proper oil viscosity also plays a role in your vehicle’s overall fuel efficiency. 

How much oil does a 1.8 L engine take?

4.4 quarts
As a general rule of thumb, the oil capacity for Toyota Corolla models equipped with 1.8L 4-cylinder engines is 4.4 quarts (4.2 liters) with the oil filter.