How Many Quarts of Oil Does an Audi Q5 Take?

An Audi Q5 typically takes between 5.2 and 6.0 quarts of engine oil (about 4.9–5.7 liters), depending on the model year and engine type. Most modern 2.0L turbocharged Audi Q5 models use roughly 5.7 quarts (5.4 liters), while some older or different engines may require slightly more or less. Always confirm with your owner’s manual or the under‑hood label for the exact specification.

Why Oil Capacity Varies by Model and Engine

The question “How many quarts of oil does an Audi Q5 take?” seems simple, but the answer depends on the engine, model year, and even regional specifications. Audi has offered the Q5 with a range of powertrains — from 2.0L turbocharged four‑cylinders to V6 engines and plug‑in hybrids. Each engine has a different oil pan design, filtration system, and cooling requirements, all of which influence how much oil is needed.

Typical Oil Capacities by Audi Q5 Engine

Different Audi Q5 engines are designed with specific oil capacities to ensure proper lubrication, cooling, and long-term reliability. The list below outlines commonly reported capacities for major Q5 engine types sold in North America and Europe in recent years.

• Q5 2.0 TFSI (gasoline, most 2013–2024 models): about 5.7 quarts (5.4 liters) with filter
• Q5 3.0 TFSI V6 (supercharged, older SQ5 and some Q5 models): about 7.0 quarts (6.6 liters) with filter
• Q5 2.0 TDI (diesel, EU and some international markets): typically around 4.9–5.5 quarts (4.6–5.2 liters) with filter, depending on engine code
• Q5 3.0 TDI V6 (diesel): commonly around 6.6–7.0 quarts (6.2–6.6 liters) with filter
• Q5 45 TFSI / Q5 40 TFSI (newer naming for 2.0L turbo gas): about 5.7 quarts (5.4 liters) with filter
• Q5 55 TFSI e (plug‑in hybrid, 2.0L gas engine plus electric motor): roughly 5.7 quarts (5.4 liters) for the gasoline engine portion
• SQ5 3.0 TFSI V6 (2018–present, turbocharged gasoline): typically about 7.0 quarts (6.6 liters) with filter

These values are representative figures based on manufacturer data and service documentation; however, small variations by market, engine code, or model year can occur, so they should always be verified against vehicle-specific documentation.

Most Common Scenario: Modern 2.0L Audi Q5 Models

For many drivers, the relevant answer is how much oil a recent, mainstream Audi Q5 2.0L turbo engine requires. This has become the predominant configuration in North America and many other markets over the last decade.

• 2018–2024 Audi Q5 2.0 TFSI / 45 TFSI: around 5.7 quarts (5.4 liters) with a new oil filter
• 2013–2017 Audi Q5 2.0 TFSI: usually close to 5.2–5.7 quarts (4.9–5.4 liters), depending on exact engine code
• Oil level check: capacity is a guideline; always top up gradually and use the dipstick or electronic oil level display to confirm

For most owners of a recent Q5 2.0T, buying six U.S. quarts of the correct oil gives enough to perform a change and fine-tune the level without running short.

How to Confirm the Exact Oil Capacity for Your Q5

Because engine codes, regional variants, and model updates can subtly alter oil capacity, the most reliable figure is the one specific to your vehicle. Several easy checks can confirm the exact requirement.

1. Owner’s manual: Look under “Capacities” or “Engine Oil” for the exact number, usually listed in liters and quarts.
2. Under‑hood stickers or labels: Some models include a capacity note near the radiator support or on the oil fill cap area.
3. Audi dealer or official service information: Parts and service departments can look up capacity using your VIN.
4. Service invoices: If you’ve had previous dealer or independent shop oil changes, invoices often list how many liters or quarts were added.
5. Digital service manuals / official repair guides: Professional databases used by shops will list the specific capacity per engine code.

Using these sources ensures you’re not relying solely on generalized figures and that your engine gets the exact amount of oil it was engineered to use.

Why Exact Oil Capacity Matters

Putting in the right amount of oil in an Audi Q5 is about far more than just following a number. The engine’s longevity, efficiency, and emissions all depend on correct filling.

• Too little oil: Can cause oil starvation, higher operating temperatures, accelerated wear, and a higher risk of engine damage.
• Too much oil: May foam, increase crankshaft drag, foul catalytic converters, and trigger warning lights or check‑engine codes.
• Turbos and high‑output engines: Q5 turbocharged and V6 engines are especially sensitive to proper lubrication and clean oil at correct levels.
• Service intervals: Audi’s extended service intervals make starting with the right capacity even more important, as the oil must remain effective for many miles.

Maintaining the precise capacity helps preserve performance and minimizes the risk of costly mechanical problems over the life of the vehicle.

Correct Oil Type for the Audi Q5

Capacity is only one part of the equation; using the correct oil specification is just as critical. Audi specifies oils that meet certain VW/Audi standards designed for their engines and service intervals.

• Common Audi/VW specs for modern Q5 gasoline engines: VW 502 00, 504 00, or newer approvals depending on model and market.
• Viscosity grades: Often 0W‑20, 0W‑30, or 5W‑40, depending on climate and model year, as stated in the owner’s manual.
• Diesel engines: May require VW 507 00 or other diesel‑specific approvals for particulate filters and emissions systems.
• Synthetic oil: Virtually all modern Q5 engines are designed for full‑synthetic oil.

Matching both the quantity and the specification ensures that the oil can handle modern engine temperatures, turbocharger demands, and long‑life service expectations.

Practical Tips for DIY Oil Changes on an Audi Q5

For drivers who change their own oil, a few practical habits can make it easier to reach the correct capacity without overfilling.

1. Buy slightly more than the listed capacity: If your Q5 calls for 5.7 quarts, having six on hand gives room for top‑offs.
2. Start by adding slightly less than full capacity: Add roughly 90–95% of the specified volume, then check the level.
3. Run the engine briefly: Let it idle for a minute or two to fill the oil filter and passages, then shut off and wait a few minutes.
4. Check the dipstick or electronic gauge: Add oil in small increments to bring the level into the recommended range.
5. Recheck after driving: After your next trip, verify that the level remains correct; adjust if needed.

This measured approach respects the stated capacity but acknowledges that slight variations in draining, filter size, and temperature can change how much oil ultimately remains in the engine.

Summary

An Audi Q5 typically requires between 5.2 and 6.0 quarts of oil for most four‑cylinder models, with the prevailing modern 2.0L turbo engines using about 5.7 quarts (5.4 liters). V6 variants, such as the SQ5, tend to need closer to 7.0 quarts (6.6 liters). The exact capacity for any individual vehicle is best confirmed through the owner’s manual, VIN‑based dealer information, or official service documentation. Ensuring both the correct amount and specification of oil is essential for protecting the engine, especially under the extended service intervals and high demands typical of modern Audi Q5 powertrains.

How much oil does a 2.0 L engine take?

Engine Oil Capacity and Specification – 2.0L EcoBoost

Variant	Including the Oil Filter
All.	5.5 qt (5.2 L)

What type of oil does an Audi Q5 2.0 take?

Advanced Eurol Syntence LV 0W20 fully synthetic oil is designed specifically for the latest Audi engines. It carries an OEM approval for the VW 508 00 oil specification required for the 2019-2024 Audi Q5 & 2023-2024 Q5 Sportback equipped with the 2.0T 4-cylinder gasoline engine.

How many quarts of oil for an Audi Q5?

The Audi Q5 oil capacity varies by engine, but a common capacity for the 2.0L engine is around 5.5 to 5.7 quarts (approximately 5.2 to 5.5 liters), while the 3.0L engine requires about 7.7 quarts (approximately 7.3 liters). For a precise amount, always consult your owner’s manual, as capacities can differ based on the specific model year and engine. 
Engine oil capacity by engine type

• 2.0L Engine:
  • Capacity: Approximately 5.5 to 5.7 quarts (5.2 to 5.5 liters)
  • Recommendation: Add about 5 liters initially and then check the level before adding more to reach the full capacity.
• 3.0L Engine:
  • Capacity: Approximately 7.7 quarts (7.3 liters)
• High-performance SQ5 3.0L:
  • Capacity: Requires about 7.4 liters (7.8 quarts) 

Important considerations

• Check the owner’s manual: This is the most accurate source for your specific vehicle’s oil capacity and requirements. 
• Check the oil level: After refilling, check the oil level via the car’s settings and add more oil as needed. Modern Q5s do not have a physical dipstick. 
• Follow the correct oil specification: Ensure the oil meets the required Audi/VW specifications (e.g., VW 504 00 / 507 00) for your engine. 

How much oil does a 2012 Audi Q5 2.0 take?

The 2012 Audi Q5 2.0T has an oil capacity of 4.6 liters or 4.9 quarts when changing the oil and filter. You should use a synthetic oil that meets the VW 502 00 specification and is of a viscosity grade such as 5W-40, 5W-30, or 0W-40. 

• Capacity: 4.6 liters / 4.9 quarts (with filter change)
• Oil Type: Full synthetic
• Oil Specification: VW 502 00
• Recommended Viscosity: 5W-40, 5W-30, or 0W-40