How Much Oil Does a 2007 BMW Take?

A 2007 BMW typically takes between 4.3 and 8.5 quarts (4.1–8.0 liters) of engine oil, depending on the specific model and engine. Smaller 4‑cylinder diesel engines sit at the low end of that range, while larger 6‑cylinder and V8 engines—especially in performance models—require more. The exact capacity depends on your engine code and model designation.

Why Oil Capacity Varies on 2007 BMW Models

The year 2007 spans a wide range of BMW vehicles—from compact 1 Series (in some markets) and 3 Series sedans to larger 5 and 7 Series, as well as SUVs like the X3 and X5 and sports models such as the M3 and M5. Each model can use different engines, and those engines have different oil pan sizes, cooling demands, and performance targets, all of which affect how much oil they require.

Typical Oil Capacities by 2007 BMW Model and Engine

The following list outlines typical oil capacities for some of the most common 2007 BMW models and engines. This is designed to give an approximate range so owners can understand where their specific car is likely to fall, but you should still confirm against the owner’s manual or a VIN-based lookup.

• 2007 BMW 3 Series (E90/E91/E92/E93)
  

  • 325i / 328i / 330i (N52/N53 3.0L inline‑6): about 6.9–7.0 quarts (≈ 6.5 liters).
  • 335i (N54 3.0L twin‑turbo inline‑6): about 6.9–7.0 quarts (≈ 6.5 liters).
  • 320i / 318i (4‑cyl petrol, non‑US markets): typically around 4.3–4.8 quarts (≈ 4.1–4.5 liters).
  • 320d / 330d (diesel, non‑US markets): generally 5.3–6.9 quarts (≈ 5.0–6.5 liters) depending on engine variant.

• 2007 BMW 5 Series (E60/E61)
  

  • 525i / 528i / 530i (N52/N53 3.0L inline‑6): about 6.9–7.0 quarts (≈ 6.5 liters).
  • 535i (N54 3.0L twin‑turbo inline‑6): about 6.9–7.0 quarts (≈ 6.5 liters).
  • 545i / 550i (4.4L / 4.8L V8: N62): typically 8.0–8.5 quarts (≈ 7.5–8.0 liters).
  • 520d / 525d / 530d (diesel): usually 6.3–7.4 quarts (≈ 6.0–7.0 liters), varying by engine code.

• 2007 BMW 7 Series (E65/E66)
  

  • 730i / 735i / 740i (inline‑6 or V8, region‑specific): roughly 7.0–8.0 quarts (≈ 6.5–7.5 liters).
  • 750i / 750Li (N62 4.8L V8): about 8.0–8.5 quarts (≈ 7.5–8.0 liters).
  • 760i / 760Li (V12): often in the region of 9+ quarts (≈ 8.5+ liters).

• 2007 BMW X3 (E83)
  

  • X3 2.5i / 3.0i (M54/N52 inline‑6): about 6.9–7.0 quarts (≈ 6.5 liters).
  • Diesel variants (e.g., 2.0d, 3.0d): typically 6.3–7.4 quarts (≈ 6.0–7.0 liters).

• 2007 BMW X5 (E70)
  

  • X5 3.0si / 3.0i (N52 3.0L inline‑6): around 6.9–7.0 quarts (≈ 6.5 liters).
  • X5 4.8i (N62 4.8L V8): about 8.0–8.5 quarts (≈ 7.5–8.0 liters).
  • Diesel models (e.g., 3.0d): generally 6.9–7.4 quarts (≈ 6.5–7.0 liters).

• 2007 BMW Z4 (E85/E86)
  

  • Z4 2.5i / 3.0i / 3.0si (M54/N52 inline‑6): about 6.9–7.0 quarts (≈ 6.5 liters).
  • Z4 M (S54 3.2L inline‑6): typically around 6.3–7.0 quarts (≈ 6.0–6.5 liters), depending on procedure and filter change.

• 2007 BMW M Models
  

  • M3 (E46, in some markets still sold in early 2007; S54): roughly 6.3–7.0 quarts (≈ 6.0–6.5 liters).
  • M5 (E60, S85 5.0L V10): typically about 9.0–9.5 quarts (≈ 8.5–9.0 liters).
  • M6 (E63/E64, S85 5.0L V10): similar to M5, about 9.0–9.5 quarts (≈ 8.5–9.0 liters).

These figures show that most mainstream 6‑cylinder 2007 BMWs cluster around 7 quarts, while high‑performance V8 and V10 cars can require well over 8 quarts. For exact numbers, always cross‑check against your engine code and manual.

How to Find the Exact Oil Capacity for Your 2007 BMW

Because 2007 marked a transitional period between different engines and markets, the most accurate way to know how much oil your specific car needs is to reference vehicle-specific data rather than relying only on averages.

• Check the owner’s manual: BMW lists oil capacity (with and without filter) in the maintenance or technical data section.
• Use your VIN: Enter your Vehicle Identification Number into BMW’s official service portals or reputable databases (such as parts catalogues) to identify your exact engine code and capacity.
• Look under the hood: Many BMWs have an engine label or code (e.g., N52B30, N54B30, N62B48) that you can match against capacity charts online.
• Consult a BMW specialist: Dealerships and experienced independent BMW shops have access to factory data and can give capacities specific to your car.
• Use reputable technical databases: Professional repair databases (e.g., AllData, factory TIS) list oil capacities by model and engine code.

Relying on these sources ensures you fill the engine to the correct level, preventing underfilling or overfilling, both of which can cause long-term damage.

Oil Type and Specification for 2007 BMWs

Knowing how much oil to add is only half the story; using the correct specification is just as important, especially on BMW’s higher-revving and turbocharged engines introduced around this era.

• BMW Longlife specifications: Most 2007 BMWs are designed for BMW Longlife‑01 (LL‑01) or, in some diesel models and certain markets, LL‑04 approved oils.
• Viscosity: Common viscosities include 5W‑30 and 0W‑40 meeting LL‑01, depending on climate and regional recommendations.
• Synthetic only: BMW specifies full synthetic oil for these engines; conventional oil is not recommended.
• Turbocharged engines (e.g., N54): High‑temperature stability and correct LL‑01 approval are particularly important for turbo models to avoid coking and sludge.
• M engines (S54, S85): These often have more specific oil recommendations; many owners and specialists prefer high‑quality LL‑01 10W‑60 or specific performance synthetics as per BMW guidance in the manual.

Choosing an oil that meets the BMW Longlife standard specified for your car helps ensure adequate protection, proper VANOS (variable valve timing) operation, and long-term engine reliability.

Practical Tips When Changing Oil on a 2007 BMW

Once you know the correct capacity and oil type, the way you perform the oil change matters as well. BMW engines are sensitive to proper servicing practices.

• Replace the oil filter every time: Capacities are usually quoted “with filter,” and BMW’s cartridge filters are designed for replacement at each change.
• Do not pour the full capacity in at once: Add about 0.5 quart (0.5 liter) less than the listed capacity, then check the level and top up slowly to avoid overfilling.
• Use the dipstick or electronic level sensor: Some 2007 models have no physical dipstick; instead, use the car’s iDrive or onboard check system while the engine is warm and on level ground.
• Warm the engine before draining: Slightly warm oil flows better, allowing more complete drainage and a more accurate refill.
• Reset the service indicator: After an oil change, follow the instrument cluster or iDrive procedure to reset the oil service reminder.
• Watch for oil leaks: Valve cover gaskets and oil filter housing gaskets are common leak points on aging BMWs; check them when the car is on a lift.

Following these practices helps ensure that the stated capacity actually results in the correct level on the gauge or sensor, and that the engine gets the full benefit of fresh oil and filtration.

What Happens If You Overfill or Underfill?

Given that many 2007 BMWs lack a traditional dipstick, owners sometimes rely solely on the digital oil level display and may misjudge how much to pour. Both overfilling and underfilling can have consequences on these engines.

• Overfilling
  

  • Can cause the crankshaft to whip the oil into foam, reducing effective lubrication.
  • May increase oil consumption by pushing oil into the intake through the PCV system.
  • Raises the risk of catalytic converter damage from burned excess oil.

• Underfilling
  

  • Reduces the oil’s ability to dissipate heat, stressing internal components.
  • Can cause low oil pressure on hard acceleration or cornering.
  • In severe cases, may lead to bearing wear or VANOS-related faults.

• Best practice
  

  • Target the middle to upper range of the BMW‑specified level, not above the maximum.
  • Check level again after a short drive, when the engine is at operating temperature and parked on level ground.

Maintaining the oil level within the recommended range, rather than simply hitting a capacity number, is the most effective way to protect a 2007 BMW engine over time.

Key Takeaways

For a 2007 BMW, oil capacity is not a single fixed number but a range determined by model and engine type. Most 6‑cylinder cars of that era use around 7 quarts (≈ 6.5 liters), smaller four‑cylinders may use about 4.3–4.8 quarts, and larger V8, V10, or V12 engines can require 8–9+ quarts. Confirming the exact figure via the owner’s manual, a VIN lookup, or a BMW specialist remains the most reliable method.

Summary

A 2007 BMW typically needs between 4.3 and 8.5 quarts (4.1–8.0 liters) of full synthetic engine oil, with most mainstream 6‑cylinder models taking about 7 quarts (≈ 6.5 liters). Performance models and larger engines use more, sometimes over 9 quarts. Owners should consult the vehicle’s manual or a VIN-based database for the precise capacity, use BMW-approved Longlife synthetic oil, and fill cautiously while monitoring the level via dipstick or onboard electronics to avoid overfilling or underfilling.

What type of oil does a BMW 2007 328i take?

To maintain the BMW 328i’s legendary performance and stability, the service team strongly recommends using Synthetic Oil with a 5W-30 grade. Using this correct type and grade is essential for routine maintenance, as it helps prevent premature wear and protects the engine from overheating and damage.

How many quarts of oil does a 2007 BMW 750li take?

Engine Oil
Capacity: 8.5 quarts (with filter).

How many quarts does a 2007 BMW 328i take?

6.9 quarts
Engine Oil
Capacity: 6.9 quarts (with filter).

What kind of oil does a 2007 BMW 525i take?

Advanced Eurol Syndura 5W40 fully synthetic oil has OEM approval for BMW Longlife-01 (LL-01) oil specification required for 2006-2007 525i and 525xi Sedan models with the 3.0-liter inline 6-cylinder engine.