How Much Oil an Audi Q5 2.0 TFSI Takes
An Audi Q5 2.0 TFSI typically takes about 5.2–5.7 liters (5.5–6.0 US quarts) of engine oil, depending on model year and specific engine variant, with most 2013–2024 2.0 TFSI models falling around 5.2–5.5 liters including the oil filter. This article explains the different capacities by generation, how to confirm the exact spec for your car, and what oil type you should use.
Contents
Why Oil Capacity Varies on the Audi Q5 2.0 TFSI
The “2.0 TFSI” label covers several generations and internal engine codes, and each can have slightly different oil capacity. Changes in oil pan design, cooling systems and emissions equipment mean that two Q5s with “2.0 TFSI” on the back may not use exactly the same amount of oil.
Below is a breakdown by generation and typical engine code to help owners identify where their Q5 sits and what oil volume it is likely to need.
First-Generation Audi Q5 (8R, 2009–2017)
The first-generation Q5 2.0 TFSI (chassis code 8R) was sold roughly from 2009 to 2017, with several internal engine codes such as CAEB, CPMA and others, depending on market and year. These early turbocharged four‑cylinder engines established the baseline for oil capacity that later versions slightly refined.
The list below outlines the typical capacities for common first‑gen 2.0 TFSI engines, including the filter.
- CAEB / early 2.0 TFSI (around 2009–2012): approx. 4.6–4.9 L (4.9–5.2 US qt)
- CPMA / later 2.0 TFSI (around 2013–2017): approx. 5.0–5.2 L (5.3–5.5 US qt)
- Markets with different emission packages: may vary by about ±0.2 L due to sump and ancillary differences
This list highlights approximate oil fill quantities for main first‑generation 2.0 TFSI variants in the Q5 8R to give owners a reference range before they perform an oil change.
These figures are typical workshop values; Audi’s own service literature often rounds to the nearest 0.1 L and stresses topping off based on the dipstick or electronic level reading rather than relying on a fixed number alone.
Second-Generation Audi Q5 (FY, 2018–Present)
The second-generation Q5 (chassis code FY), introduced for the 2018 model year in most markets, brought updated 2.0 TFSI engines such as the EA888 Gen 3/3B variants. These engines commonly power models badged 45 TFSI or 40 TFSI, depending on region. Oil capacity increased slightly compared to the earliest 8R engines.
The following list summarizes typical oil fill amounts for common second‑generation 2.0 TFSI Q5 models.
- Q5 FY 2.0 TFSI (approx. 2018–2020): about 5.2–5.5 L (5.5–5.8 US qt) including filter
- Q5 FY 2.0 TFSI / 45 TFSI mild updates (approx. 2021–2024): about 5.4–5.7 L (5.7–6.0 US qt) including filter
- Q5 Sportback 2.0 TFSI models: generally in the same 5.4–5.7 L range as equivalent standard-body Q5s
This list shows standard approximate capacities for second‑generation Q5 2.0 TFSI engines, which tend to be a little higher than many of the early first‑generation engines.
While the differences are modest, they matter when buying oil: for a typical 2018–2024 Q5 2.0 TFSI, purchasing 6 liters (or 2 gallons) of the correct oil usually covers a full change with a small margin for top‑off.
How to Find the Exact Oil Capacity for Your Specific Car
Because Audi has used multiple 2.0 TFSI engine codes and regional variations, the most reliable way to know your precise oil capacity is to refer to your own vehicle documentation and identification labels rather than relying solely on generic tables.
Below are the most practical ways to confirm the correct capacity for your exact Q5 2.0 TFSI.
- Check the owner’s manual:
The maintenance or specifications section usually lists engine oil capacity “with filter.” Look under the engine code or power figure that matches your car.
- Read the engine data sticker:
There is often a data sticker in the service booklet and inside the vehicle (commonly in the spare wheel well or door jamb) showing the engine code (e.g., “CPMA,” “CYMC,” etc.). Use that code to look up capacity in an official workshop manual or trusted database.
- Use Audi’s digital service resources:
Dealers and authorized repairers can look up your Q5 by VIN in the factory system to pull exact oil capacity for your engine and model year.
- Consult a reputable service database:
Professional platforms like ElsaWin (Audi’s workshop software) or equivalent repair databases list oil capacities by engine code. Independent shops often rely on these for accuracy.
- Cross‑check during an oil change:
When changing oil, add somewhat less than the stated capacity first, then measure via dipstick or electronic gauge and top up gradually to reach the “max” mark rather than dumping in the full listed quantity in one go.
This ordered list explains the key steps owners can take to verify oil capacity for their individual vehicle using factory and dealer information.
Using these methods avoids over‑filling or under‑filling, ensuring you match Audi’s specifications while accounting for small variations in drain technique or residual oil left in the system.
Recommended Oil Specifications for the Audi Q5 2.0 TFSI
Knowing how much oil the engine takes is only half the equation; using the correct oil type is equally important. Audi specifies particular oil standards for its turbocharged gasoline engines, and these must be followed to protect the turbo, timing components, and emissions systems.
The list below outlines the most common oil spec and viscosity recommendations for modern Q5 2.0 TFSI engines.
- VW/Audi oil standard:
Most recent Q5 2.0 TFSI engines require oil meeting VW 502 00 (for fixed intervals) or VW 504 00 (for LongLife/flexible service intervals), depending on region and service regime.
- Viscosity grade:
Common choices are 5W-30 or 0W-30 fully synthetic oils that also carry the correct VW/Audi approval code. In some hotter climates, 5W-40 that meets 502 00 may be allowed—check your manual.
- Fully synthetic only:
TFSI engines are designed around fully synthetic oils; semi‑synthetic or mineral oils are not recommended for these applications.
- Brand examples:
Castrol, Mobil, Shell, Liqui Moly, Motul and other major brands all offer oils explicitly labeled with VW 502 00 or 504 00 approvals. Always verify the approval code on the bottle, not just the viscosity.
This list summarizes the main oil standards and typical viscosities Audi recommends for the Q5 2.0 TFSI, guiding owners when selecting the right product.
Choosing oil that meets the exact VW/Audi standard listed in your manual is more important than brand loyalty or minor viscosity differences, especially for engines equipped with long service intervals or driven in demanding conditions.
Practical Tips for Changing Oil on an Audi Q5 2.0 TFSI
While many owners rely on dealerships or independent shops, some prefer to handle routine maintenance themselves. For anyone changing oil on a Q5 2.0 TFSI, a few practical points help ensure the right fill level and avoid common mistakes.
The following steps outline a typical, careful approach to refilling oil on a 2.0 TFSI engine after a change.
- Know the target capacity:
Identify the approximate total capacity (for example, 5.2–5.5 L for many modern 2.0 TFSI Q5s) before you start, so you have enough oil on hand.
- Drain completely and replace filter:
Warm the engine slightly, then drain oil fully and change the filter. Residual oil always remains in the engine, so real‑world refill volumes can be a bit lower than the theoretical capacity.
- Add slightly less than full capacity first:
If your spec is 5.5 L, start by adding about 5.0 L. This avoids overfilling, which can harm seals or the catalytic converter.
- Run engine briefly and re‑check:
Start the engine for a minute to fill the new filter and oil passages, then shut it off, wait a few minutes, and check the dipstick or electronic oil level.
- Top up gradually:
Add oil in 0.1–0.2 L increments until the level reaches the upper mark on the dipstick (or “max” on the MMI/electronic display) without exceeding it.
- Monitor over the next few drives:
Re‑check the level after a few trips; small adjustments may be needed as any trapped air works its way out and oil distributes fully.
This ordered list provides a general, safety‑oriented sequence for refilling engine oil on an Audi Q5 2.0 TFSI and confirming the correct level afterward.
By refilling cautiously and using the level indicator as your final guide, you mitigate the small uncertainties in published capacities and ensure the engine is neither starved of oil nor overfilled.
What Most Audi Q5 2.0 TFSI Owners Should Expect
Although detailed workshop figures vary slightly, for everyday planning purposes most Q5 2.0 TFSI owners can use an approximate capacity range to purchase oil and anticipate maintenance needs without delving into engine codes each time.
The points below summarize what a typical owner can expect in terms of oil volume and practical purchasing decisions.
- Typical capacity window:
About 5.0–5.5 L (5.3–5.8 US qt) for many 2013–2024 Q5 2.0 TFSI models, including filter.
- Oil to buy:
Buying 6 liters (or two 1‑gallon jugs in North America) is normally sufficient, with some left over for top‑offs.
- Check your manual for precision:
Use the manual’s specific number as your main reference and treat online figures as guidance rather than absolute.
- Always verify level after filling:
Rely on the dipstick or electronic readout to confirm that the engine is at the correct level once it has been run and rested.
This list distills the earlier technical information into simple expectations for most Audi Q5 2.0 TFSI owners preparing for an oil change.
Armed with these expectations, owners can shop for the right amount of properly approved oil and coordinate service intervals with confidence, even if they’re not performing the oil changes themselves.
Summary
An Audi Q5 2.0 TFSI generally takes between 5.0 and 5.7 liters of engine oil, with most 2013–2024 models clustering around 5.2–5.5 liters (5.5–5.8 US quarts) when the filter is changed. Early first‑generation engines sometimes sit closer to 4.6–5.0 L, while later second‑generation models may approach 5.7 L. The exact capacity depends on engine code and model year, so the most reliable figure is always in the owner’s manual or service data for your specific VIN. Whatever the precise volume, the key is to use fully synthetic oil that meets the correct VW/Audi standard (typically VW 502 00 or 504 00) and to verify the level via dipstick or electronic display after refilling, topping up carefully until it reaches the recommended mark without exceeding it.
How much oil is in an Audi 2.0 TFSI?
The quantity needed to change the oil in your engine is 4,6 litres.
What type of oil does an Audi Q5 2.0 take?
Advanced Eurol Syntence LV 0W20 fully synthetic oil is designed specifically for the latest Audi engines. It carries an OEM approval for the VW 508 00 oil specification required for the 2019-2024 Audi Q5 & 2023-2024 Q5 Sportback equipped with the 2.0T 4-cylinder gasoline engine.
How much oil does a Audi Q5 TFSI engine take?
The high-performance SQ5 3.0L TFSI engine requires nearly 40% more oil (7.4 litres vs. 5.2 litres) than the standard 2.0L engine, due to its larger displacement and additional cooling requirements.
What oil is recommended for 2.0 TFSI?
The most commonly recommended oil for the TFSI engine is 5w30. Under extreme conditions on a stock un-tuned engine the 5w30 oil can become to thin and smoke a little causing the engine to burn oil.
