How much oil does a Honda 2.0 L 4‑cylinder take?

Most modern Honda 2.0‑liter four‑cylinder engines take about 4.4 quarts (4.2 liters) with a filter if naturally aspirated (e.g., Civic 2.0), and about 5.7 quarts (5.4 liters) with a filter if turbocharged (e.g., Civic Type R, Accord 2.0T). Always verify your exact capacity in the owner’s manual and confirm on the dipstick after filling.

Why the capacity isn’t the same for every “Honda 2.0”

Honda uses several different 2.0‑liter engines across models and years. Sump size, whether the engine is turbocharged, the presence of external oil coolers, and whether you’re replacing the filter all change how much oil the engine actually takes. That’s why the safe approach is to start slightly under the listed capacity, run the engine briefly, then top off to the dipstick’s full mark.

Common Honda 2.0 L engines and typical capacities

The following figures reflect typical capacities with an oil filter change for popular Honda/Acura 2.0‑liter engines in North America and recent global models. Exact specs can vary slightly by model year and market; consult your manual for the definitive number.

• Civic 2.0 (naturally aspirated, e.g., 2016–2021 and 2022–present base Civic, engine family K20C2/LFB2): about 4.4 qt (4.2 L) with filter; roughly 4.0 qt (3.8 L) without.
• Civic Type R 2.0T (K20C1, 2017–2021 FK8; 2023–present FL5): about 5.7 qt (5.4 L) with filter; about 5.4 qt (5.1 L) without.
• Accord 2.0T (K20C4, 2018–2022): about 5.7 qt (5.4 L) with filter; about 5.4 qt (5.1 L) without.
• Acura Integra Type S 2.0T (K20C1, 2024–present): about 5.7 qt (5.4 L) with filter; about 5.4 qt (5.1 L) without.
• Older K‑series 2.0 (e.g., 2002–2006 RSX/Civic Si variants, K20A/K20Z): typically around 4.6–4.8 qt (about 4.4–4.5 L) with filter; verify per model year.
• Global-market 2.0 NA (e.g., CR‑V 2.0 R20A in some regions): commonly about 4.4 qt (4.2 L) with filter.

If your vehicle differs from the examples above (special trims, dealer-installed coolers, or regional variations), expect minor changes. Use the dipstick to finalize the level after filling.

How to fill correctly and avoid over/underfilling

Because listed capacities are approximate and assume a typical drain, it’s best practice to target the dipstick, not just the spec sheet. The steps below help you hit the correct level on any Honda 2.0‑liter.

1. Warm the engine, then shut it off and drain the oil completely.
2. Replace the filter if you’re doing a full service.
3. Add about 0.3–0.5 qt (0.3–0.5 L) less than the stated “with filter” capacity.
4. Start the engine for 30–60 seconds to fill the filter; shut off and wait 2–3 minutes.
5. Check the dipstick on level ground; top off in small increments to reach the upper mark.
6. Recheck after a short drive; adjust if needed.

This method accounts for real‑world variation (drain time, residual oil, filter size) and ensures you end at the correct level.

Recommended oil type

Most late‑model Honda 2.0‑liter engines specify full‑synthetic 0W‑20. Performance 2.0T engines (e.g., Civic Type R/Integra Type S) may list 0W‑30 or 5W‑30 for certain conditions. Always use the viscosity and API/ILSAC specification printed in your owner’s manual or on the oil cap.

Bottom line

Expect roughly 4.4 qt (4.2 L) with filter for most naturally aspirated Honda 2.0‑liter engines and about 5.7 qt (5.4 L) with filter for the turbocharged 2.0T family. Confirm your exact model’s spec in the manual and use the dipstick to set the final level precisely.

What kind of oil does a Honda Accord 2.0 T take?

Looking to find out what type of oil to use with the Honda Accord? The recommended Honda Accord oil type is 0W-20. This is a synthetic oil that will keep the turbocharged engine in your Accord running smoothly on Irvine area roads and beyond.

How much oil does a 2.0 L 4-cylinder take?

Capacity: 5.5 quarts (with filter).

How much oil does a Honda 2.0 engine take?

The 2.0L engine in a Honda Civic typically requires 4.4 quarts (4.2 liters) of oil, including the oil filter change. Some users on forums have reported needing slightly more (around 5 quarts) to reach the full mark on the dipstick. It’s always recommended to consult the owner’s manual for the most accurate information for your specific vehicle. 
Here’s a more detailed breakdown:

• General Capacity: For most Honda Civic models with the 2.0L engine, 4.4 quarts (4.2 liters) is the standard fill amount. 
• With Filter Change: This figure includes the oil that is held within the new oil filter. 
• Variations: Some owners of the 2023 Civic Hatchback have reported needing 5 quarts to reach the full mark. 
• Consult Owner’s Manual: Always refer to your specific owner’s manual for the most precise information on oil capacity and recommended oil type. 
• Recommended Oil: Honda recommends using 0W-20 oil for both the 1.5L and 2.0L engines. 

How many quarts of oil for a Honda Accord 4-cylinder?

The 4-cylinder Honda Accord typically requires 4.2 to 4.6 quarts of oil with a filter change. For example, the 2.0L 4-cylinder engine (2020) uses 4.6 quarts with a filter. The 1.5L 4-cylinder engine (2023) uses 3.9 quarts for an initial fill, and 7.7 quarts total for a full fill. Always check the vehicle’s owner’s manual for the specific oil capacity for your model year and engine. 
Here’s a more detailed breakdown:

• 2020 Honda Accord 2.0L 4-cylinder: 4.6 quarts with filter. 
• 2023 Honda Accord 1.5L 4-cylinder: 3.9 quarts initial fill, 7.7 quarts total fill. 
• 2013-2017 Honda Accord 2.4L 4-cylinder: 4.4 quarts with filter. 
• 2007-2012 Honda Accord 2.4L 4-cylinder: 4.2 quarts. 

Important Considerations:

• Filter Change: Always remember to include the oil filter in your capacity calculation.
• Manual Recommendation: Consult your owner’s manual for the most accurate oil capacity and type for your specific Accord model year.
• Checking Level: After refilling, always check the oil level with the dipstick to ensure it’s within the proper range.