How to check tire pressure on a Honda Civic “on screen” — and what Reddit owners say

Most Honda Civics do not display live tire pressures (PSI) on the instrument cluster or infotainment screen; you’ll only see a TPMS warning if a tire is low, and you should verify PSI with a gauge using the door-jamb sticker as your spec. Many Reddit threads reflect the same: on-screen PSI readouts are not available on the vast majority of Civics sold in North America. Below is a clear breakdown of what you can and can’t see, how to view TPMS status, how to reset/calibrate the system after adjusting pressures, and reliable ways to get live numbers if you want them.

What your Civic actually shows

Honda has used two types of TPMS on the Civic, and neither commonly provides per-tire PSI on-screen. Older models typically had “direct” TPMS sensors but still did not show PSI; newer generations use an “indirect” system that estimates low pressure via wheel-speed differences and also does not show PSI.

• 2006–2015 Civic (most trims/regions): Direct TPMS sensors in the wheels, but no per-tire pressure readout—only a warning light/message when pressure is low.
• 2016–2021 Civic (10th gen): Indirect TPMS (no in-tire sensors), no PSI display. You can view TPMS status and perform a “calibration” in the vehicle settings.
• 2022–2025 Civic (11th gen): Indirect TPMS continues; still no PSI display on standard models. You can see warnings and run a TPMS calibration in the instrument-cluster menu.
• Exception, Civic Type R: The Honda LogR app/track telemetry may show tire pressure data in certain regions/setups, but this is not the standard Civic experience.

The takeaway: if you’re in a typical Civic sedan/hatchback in North America, you won’t find a live PSI screen. You’ll see warnings and can reset/calibrate TPMS, but use a tire gauge for actual numbers.

How to view TPMS status and warnings on-screen

You can confirm whether the system has detected a low tire and read related messages via the driver information interface. The exact path varies slightly by generation.

• 2016–2021 Civic: Use the steering-wheel buttons to open the instrument-cluster menu. Go to Settings (or Vehicle Settings) and look for TPMS or Tire Pressure Monitoring. You’ll see if the system needs calibration or if a “Low Tire Pressure” warning is active.
• 2022–2025 Civic: Press the Home button on the left steering-wheel spoke to open the instrument display. Navigate to Settings > Vehicle > TPMS. Any active TPMS messages (e.g., “Low Tire Pressure”) will appear on the cluster and often on the center screen as a pop-up alert.

If you see a TPMS warning, assume at least one tire is below spec. Stop when safe and verify with a reliable gauge. The on-screen message won’t tell you which tire or the PSI.

How to calibrate/reset TPMS after adjusting pressures

After inflating tires to the correct cold PSI, Honda recommends a TPMS calibration so the system can relearn the baseline. This is essential on Civics with indirect TPMS.

• 2016–2021 Civic (touchscreen path): With the car in Park, go to Home > Settings > Vehicle > TPMS Calibration > Calibrate. Drive normally; the system completes learning in the background.
• 2022–2025 Civic (instrument-cluster path): With the car in Park, press Home on the steering wheel > Settings > Vehicle > TPMS Calibration > Calibrate. Then drive; calibration finishes automatically.
• If your menu labels differ: Look for “TPMS,” “Tire Pressure Monitoring,” or “Initialize/Calibrate” in Vehicle Settings. Some trims combine the option under Maintenance or Meter Setup.

Calibrating doesn’t set pressure—it tells the car “these tires are correctly inflated now.” Always set PSI first with a gauge, then calibrate.

The correct way to check your Civic’s tire pressure (with actual numbers)

Because most Civics don’t show PSI on-screen, use a gauge to measure directly and set the pressures to the manufacturer’s spec listed on the door-jamb sticker.

• Find the sticker on the driver’s door jamb. Note the front/rear PSI specs for your tire size and load (often around 32–36 PSI, but follow your sticker).
• Check pressures “cold” (car parked for at least 3 hours or driven less than ~1 mile).
• Use a quality digital or analog gauge; remove valve caps and measure each tire, including the spare if equipped.
• Inflate or deflate to the sticker PSI. Recheck after adjusting.
• After setting all tires, perform the TPMS calibration from the vehicle menu.

This process gives you accurate PSI values and ensures the TPMS won’t flag a false low after changes.

Why you might not see PSI, despite what you’ve read on Reddit

Reddit threads often mix experiences from different models and markets. Here are common reasons for confusion:

• Model differences: Some Honda SUVs (e.g., certain CR‑V/Pilot/Passport years) show PSI; Civics typically don’t.
• Region differences: Features can vary by country/trim. North American Civics generally lack on-screen PSI.
• Indirect vs direct TPMS: Indirect systems rarely show PSI because there’s no in-tire sensor to read it.
• Type R specifics: Track apps like Honda LogR may display data not available on standard Civics.

If your friend’s Honda shows PSI, it’s likely a different model or market—or an aftermarket solution.

Want live PSI on-screen anyway? Options that actually work

If you want real-time pressures displayed, you’ll need an add-on. These are popular with Civic owners who miss the feature.

• OBD-II + app: A Bluetooth OBD-II dongle plus an app can show various data, but with indirect TPMS you still won’t get PSI unless you add external sensors.
• Aftermarket TPMS kits: Valve-cap or internal sensors with a small dash display or phone app show PSI per tire in real time.
• Portable inflators with gauges: Some cordless inflators show digital PSI and stop at your set pressure—handy for quick top-ups.

Aftermarket kits are the most reliable way to get live, per-tire PSI on a standard Civic.

Quick troubleshooting if the TPMS light won’t go out

When the light stays on after you’ve set pressures, a few simple checks usually solve it.

• Confirm cold PSI matches the door-jamb sticker on all four tires.
• Perform the TPMS calibration and drive for 10–30 minutes; it may take a few trips to learn.
• Account for temperature swings: a 10°F drop can cut ~1 PSI and trigger warnings overnight.
• Inspect for a slow leak (screws/nails, bead leaks, cracked valve stems).
• If you recently rotated tires or replaced one: recalibrate TPMS.

If the warning persists after proper inflation and calibration, have a shop inspect for leaks or system faults.

Bottom line

On most Honda Civics, there’s no factory screen that shows live tire PSI—only warnings and a TPMS calibration menu. Use the door-jamb sticker for specs, a good gauge to set pressures cold, and then calibrate the TPMS so the system learns the new baseline. If you want live on-screen PSI, consider an aftermarket TPMS kit or telemetry solution.

Summary

Most Civics (including 2016–2025 models) won’t display per-tire PSI on the dash or infotainment. You can view TPMS warnings and run a calibration in the vehicle settings, but you’ll need a tire gauge for actual readings. Set pressures to the door-jamb spec, calibrate afterward, and consider aftermarket sensors if you want live PSI on-screen. Reddit owners report the same: stock Civics don’t show PSI, with limited exceptions like Type R telemetry setups.

Do Honda Civics show tire pressure?

Pressure you’ll need to reset. The system to do so your vehicle must be in park with the parking brake set if necessary. And the ignition should be on on the touchcreen.

How to check tire pressure on Honda Civic on screen?

To check tire pressure on a Honda Civic’s screen, turn the car on or into accessory mode. Navigate to the vehicle settings on the infotainment screen, then find and select the Tire Pressure Monitoring System (TPMS) option. The screen will display the current pressure for each tire. If a tire is low, the TPMS indicator light will also illuminate. 
This video demonstrates how to check tire pressure on a Honda Civic using the in-car screen: 1mHonda of LincolnYouTube · Nov 14, 2024
Here’s a more detailed breakdown:

1. 1. Start the car: . Opens in new tabTurn the ignition to the “ON” or accessory mode. This activates the car’s electrical system and allows the TPMS to function. 
2. 2. Access the TPMS menu: . Opens in new tabOn the infotainment screen, navigate to the vehicle settings menu. The exact path may vary slightly depending on your Civic’s model year, but it’s usually found under settings, vehicle settings, or sometimes under a “Maintenance” section. 
3. 3. Locate the TPMS display: . Opens in new tabOnce in the relevant menu, find the Tire Pressure Monitoring System (TPMS) option. This may be labeled as “Tire Pressure,” “TPMS,” or something similar. 
4. 4. View the tire pressures: . Opens in new tabThe screen will then display the current pressure for each tire, typically in pounds per square inch (PSI). 
5. 5. Check the indicator light: . Opens in new tabIf any tire is significantly low, the TPMS indicator light (a tire with an exclamation point) will also be illuminated on the dashboard. 

This video explains how to reset the TPMS light after adjusting tire pressure: 58sHondaYouTube · Jun 28, 2022
Important Notes:

• Calibration: After adjusting tire pressure, it’s recommended to calibrate the TPMS system to ensure accurate readings. 
• Recommended Pressure: The recommended tire pressure for your Civic can be found on a sticker located on the driver’s side doorjamb. 
• Safety: If the TPMS light comes on while driving, pull over in a safe location and check the tire pressure. If a tire is significantly low, inflate it to the recommended pressure or consider contacting a professional. 

Where is the TPMS button on a Honda Civic?

If your Honda is equipped with a TPMS button, you’ll find it to the left of the steering wheel.

How do I see my tire pressure on my dashboard?

If you’re learning about tire pressure sensors for the first time, finding the TPMS indicator on your dashboard is simple. It’s a horseshoe-shaped light with an exclamation point in the center.