How to Replace Windshield Wipers on a 2017 Honda Civic

You can replace the 2017 Honda Civic’s front wiper blades in a few minutes: lift each arm, pinch the release tabs on the blade’s connector, slide the old blade off, then click the new blade on and test. Most 2017 Civic sedans and coupes use a 26-inch driver blade and a 16-inch passenger blade; hatchbacks also have a 12-inch rear blade. Below is a step-by-step guide, model-specific notes, and expert tips to get a streak-free result without damaging your windshield.

What you’ll need

Before you begin, gather the replacement blades and a few simple items that make the job easier and safer for your glass and paint.

• New wiper blades sized for your 2017 Honda Civic (see size guide below)
• A clean towel or thick rag to protect the windshield while the arm is lifted
• Glass cleaner and a microfiber cloth (optional, for cleaning the sweep area)
• Owner’s manual (optional, to confirm sizes and connector type)

Having these items within reach helps you swap blades quickly and avoid letting the bare wiper arm snap back onto the glass.

Step-by-step replacement (front wipers)

These steps cover the 2017 Civic’s common “pinch-tab” top-lock connector used on OEM-style beam blades. Most reputable aftermarket blades include the correct adapter labeled “Top Lock 19 mm,” “PTB,” or “narrow push-button.”

1. Park safely and switch everything off. Make sure the ignition and wipers are off so the arms don’t move during the swap.
2. Lift the driver-side wiper arm. Gently raise it away from the windshield until it holds itself up. Place a folded towel on the glass beneath the arm as a safety cushion.
3. Release the old blade. Locate the small tabs on both sides of the blade’s connector. Pinch them and slide the blade downward toward the base of the arm to disengage it, then pull it away from the arm.
4. Prep the new blade. If your new blade came with multiple adapters, install the “Top Lock 19 mm” (narrow push-button) adapter on the blade body.
5. Attach the new blade. Align the adapter with the arm’s buttoned end and push until you hear or feel a click. Tug gently to confirm it’s locked.
6. Lower the arm carefully. Remove the towel and lower the arm back onto the glass in a controlled motion.
7. Repeat for the passenger side. Replace the passenger blade using the same process.
8. Clean and test. Wipe the sweep area with glass cleaner, then run the washer/wipers to confirm quiet, streak-free operation.

Following these steps ensures the blades seat correctly on the Civic’s top-lock arms, preventing chatter, lift, or accidental detachment in rain at speed.

Rear wiper (hatchback only)

If you own a 2017 Civic Hatchback, there’s also a small rear blade. It uses a compact connector on a short arm and can be swapped in minutes.

1. Open the hatch and lift the rear wiper arm away from the glass.
2. Rotate the blade perpendicular to the arm to expose the release tab or channel.
3. Press the small release tab and slide the blade outward along its track to remove it.
4. Slide the new rear blade into the arm’s channel until it clicks securely.
5. Lower the arm gently and test with the rear washer.

The rear swap is straightforward—just be gentle with the short arm and confirm the blade fully clicks into place to avoid rattles or loosening.

Model variations and correct sizes

Blade sizes can vary by body style. The following guide covers what’s most commonly specified for the 2017 Civic lineup; if in doubt, compare to the blades coming off or check the owner’s manual.

• 2017 Civic Sedan/Coupe (front): Driver 26 in (650 mm), Passenger 16 in (400 mm)
• 2017 Civic Hatchback (front): Driver 26 in, Passenger 16 in
• 2017 Civic Hatchback (rear): 12 in (305 mm)
• Connector type (front): Top Lock 19 mm (“pinch-tab”/narrow push-button). Use the matching adapter if your aftermarket blade includes multiple.

While most catalogs list the sizes above, trim-specific variations can exist. Measuring the old blades and matching their length and connector eliminates guesswork.

Fitment, brands, and cost

Choosing quality beam-style blades improves wiping in heavy rain and reduces wind lift. Expect better longevity and quieter operation from premium rubber compounds and coated edges.

• Brands commonly recommended: Honda OEM, Bosch Icon/Focus, Trico Silicone/Force, Rain-X Latitude/Advantage, Michelin Endurance
• Typical price range (each): $12–$30 for mid/premium front blades; $8–$18 for the rear blade
• Where to buy: Auto parts stores, big-box retailers, dealership parts counters, or online
• What to look for: Correct length, Top Lock 19 mm adapter included, beam design for year-round performance

Spending a bit more on well-reviewed blades often pays off with cleaner wipes and longer service intervals, especially in harsh climates.

Troubleshooting, care, and safety tips

These quick checks help you avoid streaks, noise, or damage after installation and keep your new blades performing longer.

• Don’t let the bare wiper arm snap onto the glass—always cushion with a towel.
• If the new blade feels loose, remove and reinstall until it clicks; perform a gentle tug test.
• Persistent streaks? Clean the windshield thoroughly and wipe the blade edge with a damp microfiber.
• Chatter or lift at highway speed can indicate worn blade rubber or incorrect adapter/fitment.
• Replace blades every 6–12 months, or sooner if you see cracking, skipping, or hazing.
• In icy weather, free the blade from ice before using the wipers to prevent tearing the rubber or overloading the motor.

Regular cleaning and seasonal checks extend blade life and keep visibility sharp, particularly during heavy rain or winter conditions.

Disposal and environmental notes

Used blades contain metal and rubber. While full municipal recycling isn’t always available, you can often divert components responsibly.

• Separate the metal spine for scrap recycling where accepted.
• Place the rubber element and plastic adapter in the trash if local recycling doesn’t accept them.
• Check with auto parts stores; some participate in recycling programs.

A quick sort keeps metal out of landfills and reduces the environmental footprint of routine maintenance.

Summary

For a 2017 Honda Civic, replace the front blades by lifting each arm, pinching the top-lock tabs, sliding off the old blade, and clicking on the new one—26 inches on the driver side and 16 inches on the passenger side for most sedans/coupes and hatchbacks. Hatchbacks also use a 12-inch rear blade with a simple slide-and-click swap. Use the correct Top Lock 19 mm adapter, protect the glass with a towel, clean the sweep area, and test for a firm lock and streak-free performance. Quality beam-style blades and periodic cleaning will keep visibility clear and driving safer year-round.

What windshield wipers do I need for a 2017 Honda Civic?

For a 2017 Honda Civic, the driver-side wiper blade size is typically 26 inches, and the passenger-side wiper blade size is 18 inches. Some hatchback models may also require a 14-inch rear wiper blade. 
Here is a breakdown of the standard sizes: 

• Driver’s side: 26 inches
• Passenger’s side: 18 inches
• Rear (Hatchback models): 14 inches

How to lift up windshield wipers on Honda Civic?

Area when you want to prepare your wipers for icy weather or simply want to change out the blades. Here’s how to do it safely. Start with the vehicle on or in accessory mode. Then turn the vehicle.

How to replace wiper blades on a 2017 Honda Civic?

It. Now to insert your new wiper blades just depress the two tabs on the side of the wiper blade housing. And then just slip it on the wiper arm until you hear it click on.

How to take wiper blades off Honda Civic?

So take the new blade. Line it up so that little curve part is in alignment with little J. Slide the blade over it. And then just kind of go ahead. And snap this into place then just set the arm.