How to Reset the Low Tire Pressure Light on a Honda Accord
Inflate all tires to the pressure on the driver’s door sticker when cold, then perform a TPMS calibration in the vehicle’s menu (2013–2025 models) or simply drive the car after correcting pressures (2008–2012 models); if a “TPMS” system warning stays on, a fault needs diagnosis. This guide explains what the different warning lights mean and the exact reset steps by model year so you can clear the alert safely and correctly.
Contents
Know Which Light You’re Seeing
Honda Accords show two distinct alerts: the low tire pressure indicator (a horseshoe-shaped tire icon with an exclamation point) means at least one tire is under-inflated, while the TPMS system indicator (“TPMS” text or “Check TPMS System”) signals a malfunction in the monitoring system itself. The reset steps below address the low-pressure light; a system warning typically requires inspection or repair.
Set Tire Pressures First (All Years)
Before any reset, ensure the tires are inflated correctly. The TPMS cannot be calibrated accurately if pressures are off.
- Park the car and let the tires cool (ideally after it has sat for at least 3 hours, or before driving more than a mile).
- Find the recommended cold tire pressures on the driver’s door jamb sticker (often around 32 psi, but follow the sticker for your exact trim and wheel size).
- Use a quality gauge to set each tire to the specified psi; check all four tires. Most Accords do not monitor the spare.
- Visually inspect for nails, cuts, or leaks; fix punctures before resetting.
Once pressures are set to the vehicle specification, proceed with the appropriate reset/calibration steps for your model year below.
Reset/Calibrate by Model Year
2018–2025 Accord (10th/11th generation, indirect TPMS)
These models use an “indirect” TPMS that infers pressure from wheel speed; you must calibrate the system after adjusting tire pressures or rotating tires.
- With the vehicle stopped, turn the ignition on (engine can be running or in accessory mode).
- Open the Settings menu:
- Using the touchscreen: Home → Settings → Vehicle → TPMS Calibration.
- Or using the steering-wheel controls/driver display: press Home → scroll to Settings → Vehicle → TPMS Calibration.
- Select Calibrate (or Initialize) and confirm.
- Drive normally; the system typically completes calibration after about 20–30 minutes of cumulative driving at varying speeds.
The low-pressure light should extinguish once calibration finishes. Only calibrate when all four tires are set to the correct cold pressures.
2013–2017 Accord (9th generation, indirect TPMS)
These models also use an indirect TPMS; calibration is done through the i-MID display or the touchscreen depending on trim.
- For models with the steering-wheel Menu/i-MID controls: press Menu → Vehicle Settings (or Customize Settings) → TPMS Calibration → Calibrate → Yes.
- Then drive for 20–30 minutes under varied speeds to complete the calibration process.
This method teaches the system that the current, correct pressures are its new baseline. The warning will clear once calibration is complete.
If your trim has a touchscreen interface, use the path below.
- On the upper display/touchscreen: Settings → Vehicle → TPMS Calibration → Calibrate → Yes.
- Drive as normal; the indicator will go out after calibration finishes.
If the message does not clear after a successful calibration and proper pressures, check for a slow leak or proceed to the troubleshooting section.
2008–2012 Accord (8th generation, direct TPMS)
These years use pressure sensors inside the wheels. There is no manual “reset” button; the low-pressure light turns off automatically after pressures are corrected and the car is driven.
- Set all tires to the door-sticker pressures when cold.
- Drive above about 25–30 mph for 10–20 minutes; the system will re-check and the low tire indicator should go out.
- If the “TPMS” system light stays on or flashes before staying on, a sensor/battery or system fault may be present and requires diagnosis.
If the low tire light persists after correct inflation and driving, recheck pressures and inspect for punctures; direct-sensor batteries commonly fail after 7–10 years and may need replacement.
If the Light Won’t Reset
Persistent warnings after proper inflation and calibration typically indicate a problem that needs attention. The points below can help you pinpoint next steps.
- Re-verify pressures cold; a 10–15°F temperature drop can reduce pressure by ~1 psi and retrigger the light.
- Look for a slow leak or bead/valve-stem issues; repair or replace the tire as needed.
- Ensure you performed the correct calibration steps for your model year; some trims require using the steering-wheel menu, others the touchscreen.
- For 2008–2012 models, suspect a failing in-wheel sensor battery if the TPMS system light is on; a shop can scan sensor IDs and battery status.
- If a light flashes on startup then stays solid, that’s a system fault—have the TPMS scanned for codes.
- After tire rotation or wheel changes, always recalibrate (indirect TPMS) or perform a sensor relearn if needed (direct TPMS, via shop tools).
Addressing these items resolves most stubborn alerts. If not, a tire shop or Honda dealer can perform a TPMS scan and relearn procedure.
What PSI Should You Use?
Always use the pressures on the driver’s door jamb sticker for your specific Accord, wheel size, and load—do not use the “max” psi on the tire sidewall. Most trims specify around 32 psi cold for both axles, though some wheel/tire packages may list 33–35 psi. Recheck pressures seasonally, as cooler weather reduces tire pressure.
Summary
Inflate all tires to the door-sticker psi when cold, then calibrate the TPMS via the vehicle’s menu on 2013–2025 Accords; on 2008–2012 cars, the light will clear after driving once pressures are corrected. If a “TPMS” system warning remains, have the system scanned—aging sensors, leaks, or faults may be to blame.
How do I reset the tire pressure light on a 2013 Honda Accord?
To reset the TPMS on a 2013 Honda Accord, correctly inflate the tires, then press and hold the TPMS reset button, located to the left of the steering wheel, until the low-pressure warning light flashes twice and turns off. After releasing the button, drive the vehicle for a few minutes to allow the system to recalibrate.
This video demonstrates how to reset the TPMS on a 2013-2016 Honda Accord: 59sGeorge MelnikYouTube · Feb 2, 2016
Step-by-step instructions:
- 1. Inflate your tires: Ensure all tires are inflated to the recommended pressure found on the label on the driver’s side door jamb.
- 2. Locate the reset button: Look for the TPMS reset button, a small button shaped like a horseshoe with an exclamation point, on the dashboard to the left of the steering wheel.
- 3. Press and hold the button: With the ignition in the ON position (but engine not necessarily started), press and hold the TPMS button.
- 4. Wait for the light to flash: Continue holding the button until the low-tire-pressure warning light on your dashboard flashes twice.
- 5. Release the button: Once the light flashes twice, release the button.
- 6. Calibrate: Drive the vehicle for a few minutes at a normal speed to allow the system to recalibrate.
Important notes:
- The 2013 Honda Accord uses an indirect TPMS system, which means it doesn’t have sensors inside the wheels. It uses the ABS wheel speed sensors to detect differences in wheel rotation, indicating a low tire.
- If the TPMS light remains on or flashes, it may indicate a sensor failure, so you should have it inspected by a professional.
How to reset tire pressure light Honda Accord 2015?
To reset the tire pressure light on your 2015 Honda Accord, first, ensure all tires are inflated to the correct PSI, then locate the TPMS calibration button on the lower left side of the dashboard and press and hold it until the light flashes, or use the touchscreen to navigate to Settings > Vehicle > TPMS Calibration > Calibrate. After initiating the process, the light will go out after about 30 minutes of driving at speeds between 30-60 mph.
Method 1: Using the TPMS Button
This method applies to Accords equipped with a physical TPMS button.
- 1. Check tire pressure: . Opens in new tabWith the vehicle parked, ensure all tires are inflated to the recommended pressure, which can be found on the sticker on the driver’s side door jamb.
- 2. Start the engine: . Opens in new tabTurn the ignition to the ON position or press the engine start button without pressing the brake pedal.
- 3. Locate the TPMS button: . Opens in new tabFind the TPMS button on the driver’s side dashboard, usually to the left of the steering wheel or near your left knee.
- 4. Initiate calibration: . Opens in new tabPress and hold the TPMS button until the low tire pressure indicator light on the instrument panel blinks twice.
- 5. Drive to complete: . Opens in new tabDrive for approximately 30 minutes at speeds between 30 and 60 mph, and the light will go out when the process is complete.
Method 2: Using the Touchscreen
This method is for models with the Display Audio touch screen.
- Check tire pressure: Inflate all tires to the proper PSI.
- Start the engine: Turn the ignition to the ON position.
- Access the menu: On the touch screen, select the Home icon, then touch Settings.
- Select TPMS calibration: Navigate to Vehicle, then select TPMS Calibration.
- Start calibration: Select Calibrate to begin the process.
- Drive to complete: The calibration process will complete automatically after about 30 minutes of driving.
If the light does not turn off:
- Double-check all tire pressures to ensure they are set correctly.
- If the light persists, the battery in the TPMS sensor might be low, and a tire place or mechanic can help diagnose and replace it.
How to reset tire pressure display on Honda?
How to Reset Tire Pressure Monitoring System in Newer Honda Vehicles
- From the home screen, select Settings.
- Select Vehicle.
- Select TPMS Calibration.
- Select Calibrate.
How do you clear the low tire pressure light on a Honda Accord?
To reset the Tire Pressure Monitoring System (TPMS) light on a Honda Accord, ensure all tires are inflated to the correct PSI, then use the infotainment system’s settings menu (“Settings” > “Vehicle” > “TPMS Calibration” > “Calibrate”) for touchscreens or the physical TPMS button to the left of the steering wheel for non-touchscreen models, pushing and holding until the light blinks. The system needs recalibration after tire pressure adjustments or changes, and will automatically complete calibration after a short drive.
This video demonstrates how to reset the tire pressure light on a Honda Accord with a touchscreen: 53sTommyJacksonTVYouTube · May 4, 2023
Step-by-Step Reset Procedure
- 1. Check and Inflate Tires: Verify that all four tires are inflated to the pressure recommended on the label inside the driver’s side door jamb.
- 2. Access Vehicle Settings:
- For models with a touchscreen: Press the Home button on the display, then select Settings > Vehicle > TPMS Calibration > Calibrate.
- For models without a touchscreen: Use the steering wheel buttons and the driver information display to navigate to Vehicle Settings, then select TPMS Calibration, and finally choose Calibrate.
- For older models with a physical button: Turn the ignition on, locate the TPMS button (often with the tire-shaped indicator light) to the left of the steering column, and push and hold it until the light blinks twice.
- 3. Initiate Calibration: Select Calibrate on the screen or release the button after it blinks to start the process.
- 4. Drive to Complete: Drive the vehicle for approximately 30 minutes at speeds between 30-60 mph to allow the recalibration to finish automatically. The light should turn off.
Important Considerations
- The TPMS system must be recalibrated after adjusting tire pressure, changing a tire, or rotating the tires.
- If the warning light remains on after these steps, it may indicate a fault with one of the TPMS sensors, and you should have it inspected by a mechanic.
