What headlights does a 2015 Honda CR-V take?

Most 2015 Honda CR‑V models use an H11 halogen bulb for the low beam and a 9005 (HB3) bulb for the high beam; however, some base LX models use a single dual‑filament 9003/HB2 bulb that serves both high and low beams. The exact bulb depends on the headlamp housing your vehicle has, so a quick visual check or a look at the housing label is recommended. Below is a detailed breakdown and how to confirm what’s on your CR‑V.

Bulb types by headlamp configuration

Projector (two‑bulb) headlamp — common on EX, EX‑L, Touring

This setup uses a projector lens for the low beam and a separate reflector for the high beam. If you see a round lens element inside the headlight, you likely have this configuration.

• Low beam: H11 (55W halogen)
• High beam: 9005 / HB3 (60W halogen)
• Daytime running light (DRL): Uses the 9005 high beam at reduced power on most trims; Touring models may have an LED DRL strip (not user‑serviceable)
• Fog light (if equipped): H11
• Front turn signal: 7443A (amber)
• Front side marker/parking: 168/194 (wedge)

In this projector arrangement, low and high beams are separate bulbs, which simplifies replacing just one function if it fails and typically provides a sharper low‑beam cutoff.

Single‑bulb reflector headlamp — found on some LX models

This setup uses one dual‑filament bulb to handle both low and high beams in a multi‑reflector housing. If you do not see a distinct projector lens and the housing looks like a single reflector bowl, you may have this type.

• Low/high beam (dual‑filament): 9003 / HB2 (also commonly cross‑listed as H4)
• Daytime running light (DRL): Uses the same 9003/HB2 bulb at reduced power
• Fog light (if equipped): H11
• Front turn signal: 7443A (amber)
• Front side marker/parking: 168/194 (wedge)

With the single‑bulb system, one bulb handles both beams; if it fails, you lose both high and low functions until it’s replaced.

How to confirm your setup

Because the 2015 CR‑V was offered with two headlamp styles, it’s best to verify before buying bulbs. Use the quick checks below.

• Visual cue: A round projector lens usually means H11 low beam + 9005 high beam. A plain reflector bowl with no lens typically means a 9003/HB2 dual‑filament bulb.
• Lens or cap marking: Look on the back of the headlamp dust cap or on the headlamp housing; bulb types (e.g., “H11,” “HB3,” “HB2/9003”) are often molded or printed there.
• Owner’s manual/parts catalog: Honda’s 2015 CR‑V manual lists bulb types by headlamp “Type.” Match the illustration to your housing, or check by VIN with a dealer/parts site.

Confirming this beforehand ensures you purchase the correct bulbs the first time and avoids fitment issues.

Replacement tips

Swapping headlight bulbs on the 2015 CR‑V is straightforward, but a few practices help ensure good performance and safety.

1. Verify the bulb type and access side-by-side; space is tighter on the battery/intake side.
2. Do not touch the glass of halogen bulbs; oils can shorten bulb life—use gloves or a clean tissue.
3. Seat the bulb fully and lock the retainer to prevent moisture intrusion.
4. After replacement, check aim; there are vertical aim adjusters on the headlamp assemblies.
5. If one bulb failed, consider replacing both low beams together for even color and brightness.

Following these steps will help restore optimal nighttime visibility and prevent premature bulb failure.

Notes on LED/HID upgrades

Many owners consider upgrades, but compatibility and legality vary. Keep the following in mind.

• Beam pattern matters: Drop‑in LED/HID kits in halogen housings can create glare or scatter; use quality, application‑specific kits and verify a sharp cutoff on a wall test.
• Legal compliance: Some regions restrict non‑halogen bulbs in halogen housings; check local regulations.
• Electrical considerations: Some LED kits may trigger bulb‑out warnings or DRL issues; choose kits designed for H11 or 9003/HB2 with proper drivers/decoders.
• Heat and space: Ensure heat sinks/fans fit under the dust cap without contacting components.

If you upgrade, select reputable products matched to your exact headlamp type and verify performance and legality before road use.

Summary

The 2015 Honda CR‑V typically takes H11 bulbs for low beams and 9005 (HB3) for high beams in projector‑style headlamps (common on EX/EX‑L/Touring). Some LX models use a single 9003/HB2 dual‑filament bulb for both beams in a reflector housing. Fog lights are H11 if equipped. Confirm your headlamp style by visual inspection or the housing/owner’s manual to ensure you buy the correct bulbs.

What kind of headlight does a Honda CRV take?

Honda CR-V (2019) Bulb Size Chart

Headlights (High Beam)	9005 (HB3)
Headlights (Low Beam)	H11 (H8 H9)
Front Fog Lights	H11 (H8 H9)
Reverse Light (Back-Up Light)	T15 (912 921)
Brake Light (Rear)	T15 (912 921)

Does the 2015 Honda CRV have LED headlights?

On EX and higher trims, the headlight arrays include a dramatic and premium-looking Light Emitting Diode (LED) daytime running light (DRL) strip. For the LX trim, the halogen low beams serve double-duty as the DRL.

How much is it to get your headlight replaced on a Honda CRV 2015?

The average cost for a Honda CR-V Headlight Bulb Replacement is between $71 and $91 but can vary from car to car.

What headlight bulb does a 2015 Honda Civic take?

OQSNCV Fit for Honda Civic (2014-2015 Coupe), (2016-2022) Halogen Headlight Bulbs, 9005 High Beam + H11 Low Beam light Headlamp Replacement Bulbs Kit, Pack of 4.