What Is the Bolt Pattern on a 2011 Audi Q5?

The 2011 Audi Q5 uses a 5×112 bolt pattern, meaning five wheel bolts arranged on a 112 mm diameter circle. This pattern is common across many modern Audi and Volkswagen Group vehicles, but correct fitment also depends on center bore, offset, and wheel size.

Contents

Understanding the 2011 Audi Q5 Wheel Bolt Pattern
Key Wheel Specs for the 2011 Audi Q5
What “5×112” Actually Means
Other Fitment Factors Beyond Bolt Pattern
Practical Advice for Choosing Wheels for a 2011 Audi Q5
Summary

Understanding the 2011 Audi Q5 Wheel Bolt Pattern

The bolt pattern is a critical specification when choosing new wheels for a 2011 Audi Q5, as it determines whether a wheel can be safely and securely mounted to the hub. For this model year, Audi standardized several wheel-related dimensions that owners and buyers should know before ordering aftermarket or replacement rims.

Key Wheel Specs for the 2011 Audi Q5

Several measurements work together to ensure wheels fit and perform correctly on a 2011 Q5. Beyond the bolt pattern, you need to consider center bore, offset, and typical factory wheel sizes.

Core Fitment Specifications

The following list outlines the main wheel fitment specs that apply to most 2011 Audi Q5 trims (including 2.0T and 3.2 models sold in North America and Europe). Actual factory wheel size may vary by trim and package, but these core hub dimensions are consistent.

Bolt pattern (PCD): 5×112 (5 bolts on a 112 mm circle)

Center bore (hub bore): 66.6 mm

Wheel bolt type: 14×1.5 mm, typically ball-seat bolts (OEM)

Typical OEM wheel diameters: 17″, 18″, or 19″ depending on trim/package

Typical OEM wheel widths: 7.5J–8.5J (varies by exact wheel design)

Typical OEM offsets (ET): roughly ET +29 to +39 mm, depending on wheel

Bolt pattern compatibility: Shares 5×112 with many Audi, VW, Mercedes-Benz, and some other European models, though other specs must still match

Taken together, these specifications ensure that any replacement or aftermarket wheel matches the hub, clears brakes and suspension components, and maintains proper handling and load capacity on the 2011 Q5.

What “5×112” Actually Means

While “5×112” is often quoted as a simple label, it reflects a precise geometric arrangement that determines whether a wheel can be mounted at all. Understanding that geometry helps explain why a wheel with a near-but-not-exact pattern will not safely fit.

Breaking Down the Pattern

This breakdown explains how the 5×112 designation is constructed and why it matters for the Audi Q5’s fitment.

Number of bolt holes (5): The 2011 Q5 uses five wheel bolts, which contribute to even load distribution and secure retaining of the wheel.

Pitch circle diameter (112 mm): The second number represents the diameter of the imaginary circle that passes through the centers of the bolt holes.

Metric measurement: The 112 value is in millimeters, which is standard for European vehicles such as Audi.

Non-interchangeability: A 5×112 wheel will not correctly fit hubs designed for patterns like 5×114.3 or 5×120 without adapters—and using the wrong pattern is unsafe.

Design impact: Automakers use patterns like 5×112 to balance strength, brake clearance, and compatibility across models.

This geometric explanation underlines why the 2011 Audi Q5 requires wheels explicitly drilled for a 5×112 pattern if they are to mount correctly and safely.

Other Fitment Factors Beyond Bolt Pattern

Even with the correct 5×112 pattern, wheel fitment on a 2011 Q5 depends on additional dimensions. These factors affect how the wheel sits in the arch, how it loads the suspension, and whether it clears the brakes.

Center Bore and Hub-Centric Fit

The center bore of the 2011 Audi Q5 is 66.6 mm, a typical Audi hub size for this generation. This dimension affects how the wheel centers itself on the hub.

The following list highlights how center bore influences fitment and what to check.

Correct size: OEM Q5 wheels have a 66.6 mm center bore to match the hub exactly.

Hub-centric mounting: A matching bore ensures the wheel is centered by the hub, reducing vibration at speed.

Aftermarket wheels: Many aftermarket wheels are made with a larger bore and use hub-centric rings to adapt to 66.6 mm.

Too small a bore: A wheel with a smaller center bore than 66.6 mm will not fit over the hub at all.

Too large without rings: Oversized bore without rings can make the wheel lug-centric, increasing the chance of vibration.

Confirming or adapting the center bore ensures that an otherwise correctly patterned 5×112 wheel runs smoothly and safely on the Q5.

Offset (ET) and Clearance

Offset describes how the wheel’s mounting surface relates to its centerline and strongly influences stance, clearance, and steering feel on the 2011 Q5.

The following points outline key offset considerations for fitting wheels to this SUV.

Typical OEM range: Factory Q5 wheels generally fall in the ET +29 to +39 mm range.

High positive offset: Higher ET numbers pull the wheel inward toward the suspension and brakes.

Lower offset: Lower ET numbers push the wheel outward, closer to the fender edge.

Risk of rubbing: Too low an offset can cause the tire to contact fenders or liners during turns or suspension compression.

Suspension and brake clearance: Too high an offset can cause interference with control arms, struts, or brake calipers.

Staying near the factory offset range when choosing a 5×112 wheel helps preserve the Q5’s intended handling, steering geometry, and clearance.

Practical Advice for Choosing Wheels for a 2011 Audi Q5

When selecting wheels—whether winter, summer, or cosmetic upgrades—the 2011 Q5 owner needs to ensure that all fitment specs, not just the bolt pattern, are correct. Retailers and installers often provide compatibility tools, but it is useful to understand the basics personally.

Steps to Confirm Correct Wheel Fitment

The following sequence offers a practical checklist for verifying whether a wheel will fit a 2011 Audi Q5 before purchase or installation.

Verify bolt pattern: Confirm the wheel is 5×112 to match the Q5’s hub layout.

Check center bore: Ensure the wheel has a 66.6 mm bore or that suitable hub-centric rings are available.

Confirm offset: Aim for an offset close to the OEM range; check with a fitment guide if using more aggressive specs.

Assess wheel width and diameter: Choose sizes that clear brakes and suspension and that can accept appropriately sized tires.

Confirm load rating: Make sure the wheel’s load capacity is sufficient for a mid-size SUV like the Q5.

Use reliable fitment tools: Cross-check with reputable online fitment databases or dealer parts catalogs for your exact trim.

Following this checklist minimizes the risk of clearance issues, vibration, or safety problems, even when deviating from stock wheel sizes for aesthetic or performance reasons.

Summary

The 2011 Audi Q5 uses a 5×112 bolt pattern, paired with a 66.6 mm center bore and offsets typically in the +29 to +39 mm range. While the 5×112 pattern allows some cross-compatibility with other Audi and European models, proper wheel selection also depends on center bore, offset, width, diameter, and load rating. Verifying all of these factors ensures that any new wheels fit safely and maintain the intended ride and handling characteristics of the Q5.

What is the bolt pattern on a 2011 Audi a5?

Bolt pattern: 5 lug with a 112 mm bolt circle diameter. Width: 8.5″.

What size rims are on a 2011 Audi Q5?

Audi Q5 8R 2.0 TDi

Tire	Rim	bar
OE 235/60ZR18 103W	8Jx18 ET39	2.2
235/65R17 104H	7Jx17 ET37	2.1
235/55R19 102V	8Jx19 ET39	2.3
255/45ZR20 101W	8.5Jx20 ET33	2.4

What is the bolt pattern on an Audi Q5?

The Audi Q5 has a bolt pattern of 5×112 for all model years. This means there are five lug bolts with a bolt circle diameter of 112mm.

You can watch this video to learn how to check your car’s bolt pattern: 56sDeutsche Auto PartsYouTube · Jan 30, 2020

5×112: This indicates five lug holes and a distance of 112 millimeters between the centers of opposite lug holes.
Confirmation: This bolt pattern is consistent across various generations, from 2008 to the latest models.
Other common Audi/VW bolt pattern: For comparison, some older Volkswagen and Audi models used a 5×100 bolt pattern, but the Q5 uses the more modern 5×112 pattern.
Related specifications: When choosing wheels, also consider the center bore, offset, and wheel size, which are specific to the Q5 model and wheel type. The most common center bore is 66.5mm.