Honda Accord Lug Pattern: What You Need to Know
For most modern Honda Accords (model years 2003–2025), the lug pattern is 5×114.3 mm (also written as 5×4.5″), with a 64.1 mm center bore and M12x1.5 lug nuts. Earlier Accords used different patterns, especially before 2003, so it’s important to match the pattern to your specific model year and trim. Below is a breakdown to help you identify the correct fitment.
Contents
What “lug pattern” means and why it matters
The lug pattern (also called bolt pattern or PCD—pitch circle diameter) describes how many wheel studs your car has and the diameter of the circle they form. For example, “5×114.3” means five lugs spaced on a 114.3 mm circle. Matching this pattern, along with center bore, thread size, and offset, is essential for safe wheel fitment and proper handling.
Quick specs for modern Honda Accords (2003–2025)
The following points summarize the most widely applicable wheel-fitment details for current-generation and recent Honda Accords sold in North America. Use this as a reference when buying wheels or tires.
- Lug/bolt pattern: 5×114.3 mm (5×4.5″)
- Center bore: 64.1 mm (hub-centric)
- Thread size: M12 x 1.5
- Typical lug nut torque: ~80 lb-ft (108 N·m). Check your owner’s manual for the exact spec.
- Seats: Most aftermarket lug nuts use a 60° conical seat; always match the seat type to the wheel manufacturer’s requirement.
These specifications apply to gasoline and hybrid trims alike in recent model years, including the 10th- and 11th-generation Accords (2018–2025). Always verify details for special editions or aftermarket brake packages.
Accord lug patterns by model year
Because the Accord has been sold for decades, lug patterns vary on older generations. Use this model-year guide to identify your likely pattern; then confirm on the car or in official documentation before purchasing wheels.
- 2023–2025 (11th gen): 5×114.3 (all trims, including Hybrid)
- 2018–2022 (10th gen): 5×114.3
- 2013–2017 (9th gen): 5×114.3
- 2008–2012 (8th gen): 5×114.3
- 2003–2007 (7th gen): 5×114.3
- 1998–2002 (6th gen): 4-cylinder trims typically 4×114.3 (4-lug); V6 trims 5×114.3 (5-lug)
- 1994–1997 (5th gen): 4×114.3 (4-lug)
- 1990–1993 (4th gen): 4×114.3 (4-lug)
- 1986–1989 (3rd gen): commonly 4×100 (4-lug)
- 1982–1985 (2nd gen): commonly 4×100 (4-lug)
- 1976–1981 (1st gen): commonly 4×120 (4-lug)
While the above is a reliable general guide, regional variants and special models can differ. When in doubt, measure your car’s pattern or consult a trusted fitment database and your owner’s manual.
Other fitment factors to match
Center bore and hub-centric rings
Most modern Accords use a 64.1 mm hub bore. If your aftermarket wheel has a larger bore, use hub-centric rings (e.g., 73.1 → 64.1) to prevent vibration. Never force a smaller-bore wheel onto the hub.
Offset and width
Factory offsets are typically in the +40 to +55 range, depending on wheel width. Staying close to stock offset preserves steering feel, scrub radius, and fender clearance. Changing width or offset may require tire size adjustments to avoid rubbing.
Lug nuts and torque
Use M12x1.5 lug nuts that match the wheel’s seat type (often a 60° taper for aftermarket wheels). Tighten in a star pattern and torque to your manual’s spec (around 80 lb-ft for recent Accords), then re-torque after 50–100 miles.
How to verify your lug pattern on the car
If you’re unsure about your specific model and trim, these basic checks will confirm your pattern before buying wheels.
- Count the lugs: Determine if you have 4 or 5 studs.
- Measure PCD: For 5-lug hubs, measure from the center of one stud to the outer edge of the stud two positions away; for 4-lug, measure center-to-center across the hub.
- Check the center bore: Look up the factory spec (most modern Accords are 64.1 mm) or measure with calipers.
- Confirm thread size: Honda Accords use M12x1.5; verify in the owner’s manual.
- Cross-reference: Use the VIN, owner’s manual, or a reputable wheel fitment guide to confirm.
Taking these steps reduces the risk of purchasing incompatible wheels and helps ensure safe, vibration-free driving.
Bottom line
For nearly all Accords from 2003 through the current 2025 model year, the lug pattern is 5×114.3 mm (5×4.5″), paired with a 64.1 mm center bore and M12x1.5 lug nuts. Older models—particularly those made before 2003—may use 4×114.3, 4×100, or (on the earliest cars) 4×120, so verify by year and trim before buying wheels.
Summary
Most modern Honda Accords (2003–2025) use a 5×114.3 bolt pattern, 64.1 mm hub bore, and M12x1.5 lugs. Pre-2003 models vary: many 1990–2002 four-cylinder cars are 4×114.3, with 1998–2002 V6 models at 5×114.3; earlier 1980s models commonly use 4×100, and the first generation often 4×120. Always verify your specific year and trim to ensure proper fitment.
What rims are compatible with the Honda Accord?
Best Rims for Honda Accord – A Quick Overview
| Model Name | Starting Price/ea | Available Sizes |
|---|---|---|
| Touren 3130 TR3 | $134.42 | 15”, 16”, 17”, and 18” |
| TSW Sebring | $207.88 | 17”, 18”, 19”, and 20” |
| Niche Teramo | $302.00 | 18” and 20” |
| VMR V710 | $280.00 | 18”, 19”, 20” and 22” |
What is the bolt pattern on a 2003 Honda Accord LX?
Bolt pattern: 5 lug with a 4.5″ bolt circle diameter. Width: 7″.
What Hondas have 4×100?
Compatibility and Suitability: The 4×100 bolt pattern is predominantly found in compact and subcompact Honda models, such as older Civic models, the Fit, CRX, Insight, Del Sol, Prelude, and City. It’s crucial to verify the bolt pattern for your specific vehicle model and year.
What is the bolt pattern on a 2006 Honda Accord?
This Factory OEM Honda rim comes equipped on a 2006-2007 Honda Accord. This is an aluminum wheel with a diameter of 16″ and a width of 6.5″. This Honda Accord wheel has 5 lug holes and a bolt pattern of 115mm.
