What is the oil filter number for a 2007 Honda Fit?

The OEM Honda oil filter for a 2007 Honda Fit is 15400-PLM-A02 (which supersedes 15400-PLM-A01). Many Honda dealers now supply 15400-RTA-003 as the current genuine replacement, and it is backward-compatible with the 2007 Fit. This compact hatchback uses Honda’s 1.5L L15A engine with an M20 x 1.5 filter thread, so several high-quality aftermarket equivalents also fit if you’re not using OEM.

What you need to know

Honda’s 2007 Fit shares the same filter interface found on many Honda four-cylinders of the era. The OEM filter numbers have evolved over time due to supplier and stocking changes, but the fit and function remain the same. Owners often choose either the standard “short” canister (commonly referenced as the 6607 size) or a “long” canister (7317 size) that slightly increases media and oil capacity where there’s adequate clearance—both fit the 2007 Fit in stock configuration.

Official Honda part numbers

The following are the genuine Honda part numbers associated with the 2007 Fit’s oil filter. Honda’s parts program has superseded older numbers to newer ones over time; any of these listed items are compatible with the 2007 Fit’s L15A engine.

• 15400-PLM-A02 — Genuine Honda filter commonly specified for this model; supersedes 15400-PLM-A01.
• 15400-PLM-A01 — Earlier OEM filter; fully compatible and often found as legacy stock.
• 15400-RTA-003 — Current Honda genuine filter widely supplied by dealers as of recent model years; backward-compatible with older Hondas including the 2007 Fit.

If you want to be absolutely certain, give your dealer your VIN; they will confirm the currently serviced/superseding part number that matches your car.

Common aftermarket equivalents

If you prefer aftermarket, these well-known filters match Honda’s specifications and fit the 2007 Fit. Most brands offer two sizes: a short can (often labeled 6607/108) and a longer can (7317/110) that increases filter media and capacity slightly. Use the long can only if you have normal clearance around the filter.

• Fram: PH6607 or XG6607 (short); PH7317 or XG7317 (long, higher capacity)
• Purolator: PL/L14612 (short); PL/L14610 (long)
• Bosch: 3300 (short); 3323 (long)
• Mobil 1: M1-108A (short); M1-110A (long)
• K&N: HP-1008 (short); HP-1010 (long)
• SuperTech (Walmart): ST6607 (short); ST7317 (long)

Choose OEM or a reputable aftermarket brand and stick with the same size and quality level each service interval to keep results consistent.

Service notes for the 2007 Honda Fit

Oil type and capacity

Honda originally specified 5W-20 for the 2007 Fit in most climates. Many owners successfully use 0W-20 in colder regions, but you should follow your owner’s manual or local dealer guidance. Approximate capacity with filter change is about 3.8 US qt (3.6 L).

Installation tips

Lightly oil the new filter’s gasket, spin it on by hand until the gasket contacts the base, then tighten about three-quarters of a turn by hand (or torque to roughly 12 N·m/9 lb-ft if you use a wrench with a cap). Replace the drain-plug crush washer and torque the plug to about 29 lb-ft. Start the engine, check for leaks, and verify the oil level after a short run.

Summary

The correct OEM oil filter number for a 2007 Honda Fit is 15400-PLM-A02 (superseding 15400-PLM-A01), with many dealers now supplying 15400-RTA-003 as the current Honda replacement. Trusted aftermarket equivalents include Fram 6607/7317, Purolator 14612/14610, Bosch 3300/3323, Mobil 1 M1-108A/M1-110A, K&N HP-1008/HP-1010, and SuperTech ST6607/ST7317. Use 5W-20 oil and about 3.8 US qt (3.6 L) with a new filter, and follow proper installation and torque practices.

What oil filter does a 2007 Honda Fit take?

Original Equipment Honda Engine Oil Filter 15400-PLM-A02.

How do I know what oil filter will fit my car?

Check your car’s owner manual
The first step in choosing the right engine oil filter for your car is to consult your car’s owner manual. The manual provides specific recommendations for the type and size of the oil filter that is compatible with your car’s engine and oil system.

What vehicles does a Fram PH7317 oil filter fit?

Fram, PH7317 Extra Guard Oil Filter, For Use With 05-02 Acura, 05-03 Acura Truck, 05-01 Chrysler, Cub Cadet, 05-01 Dodge, 96-92 Dodge, 93 Dodge Truck, 98-92 Eagle, 97-92 Ford, 05-01 Honda, 05-02 Honda Truck, Hyster, 03-02 Hyundai, 99-95 Hyundai, 05-96 Infiniti, 05-97 Infiniti Truck, 02-93 Mazda, 99-93 Mazda Truck, 03- …

What size is the Honda oil filter?

Measurements

Outside Diameter	2.67 Inches
Thread Size	M20-1.50
Item Weight	3.23 ounces
Number of Items	1