What is the oil filter number for a 2007 Honda Pilot?

The correct OEM oil filter for a 2007 Honda Pilot (3.5L V6) is Honda part number 15400-PLM-A02, which supersedes the older 15400-PLM-A01. Many aftermarket equivalents exist (for example, Fram PH7317/XG7317, WIX 51365, Purolator L14610/PL14610, Bosch 3323, Mobil 1 M1-110A, K&N HP-1010), but always verify fitment by VIN before purchase. Below is a deeper look at the options and considerations.

The OEM part you’ll get from a Honda dealer

Honda’s current North American genuine replacement filter for the 2007 Pilot is 15400-PLM-A02. It’s the widely used 20×1.5 mm-thread “Honda/Nissan 7317-size” canister filter and replaces the earlier 15400-PLM-A01. Depending on dealer inventory, you may also encounter Honda’s newer 15400-RTA-003 filter being offered for broad applications; while dimensionally compatible with the J35 V6 used in the 2007 Pilot, you should confirm by VIN at the parts counter to ensure it’s the officially supported part for your vehicle.

Common aftermarket equivalents

If you prefer aftermarket parts, numerous high-quality filters cross-reference to the Honda OEM spec. The “long” 7317/14610-size filters are typically recommended for capacity, with “short” 6607/14612-size options also fitting but offering less media volume. Here are widely available equivalents by brand:

• Fram: PH7317 (standard), XG7317 (Ultra), TG7317 (Tough Guard); short option PH6607
• WIX: 51365 (standard), 57365XP (XP); short option 51356
• Purolator: L14610 (Premium), PL14610 (BOSS), PBL14610; short option L14612
• Bosch: 3323 (Distance Plus/Workshop lines vary by retailer); short option 3300
• Mobil 1: M1-110A (updated version of M1-110)
• K&N: HP-1010 (Wrench-Off), PS-1010 (Performance Silver)
• ACDelco: PF2057
• SuperTech (Walmart): ST7317; short option ST6607
• Royal Purple: 10-2876
• Denso: 150-1003

These cross-references are commonly stocked in North America and are compatible with the 2007 Pilot’s M20 x 1.5 thread and sealing surface. When possible, choose the longer 7317/14610-size for more filter media and slightly higher capacity; the shorter variants will fit but may reduce service margin.

Fitment notes and service tips

The 2007 Honda Pilot uses the J35-series 3.5L V6, which employs the widely used M20 x 1.5 filter thread and a standard Honda sealing diameter. Hand-tightening the new filter per the filter manufacturer’s instructions (typically gasket contact plus 3/4 turn) is sufficient; avoid overtightening. Honda also specifies replacing the 14 mm drain-plug crush washer (Honda P/N 94109-14000) at each oil change to prevent seepage. Use the oil viscosity stated on your oil cap/owner’s manual (original spec is 5W-20 for 2007; some owners opt for 0W-20 in moderate climates, but follow Honda guidance and local conditions).

Why you might see different numbers

Part numbers vary due to vendor changes, supersessions, and brand-specific cataloging. Honda’s A01 vs A02 suffixes historically reflected different OEM suppliers; both met Honda’s specifications. Aftermarket brands use their own numbering systems, and many offer multiple grades (economy to extended-life) with the same fitment. Always match by year, model, engine, and thread/gasket specs—or provide your VIN to a dealer—before buying.

Summary

For a 2007 Honda Pilot, the OEM oil filter is Honda 15400-PLM-A02 (superseding 15400-PLM-A01), with widely available equivalents such as Fram PH7317/XG7317, WIX 51365, Purolator L14610/PL14610, Bosch 3323, Mobil 1 M1-110A, and K&N HP-1010. Choose the longer 7317/14610-size when possible, replace the drain-plug crush washer, and verify fitment by VIN for best results.

How do I tell which oil filter I need?

To determine the correct oil filter, first, consult your vehicle’s owner’s manual for specifications. You can also use online tools on auto parts websites or enter your vehicle’s year, make, model, and engine size to find a compatible filter. Finally, choose a reputable brand and consider a synthetic media filter if you use synthetic oil to ensure proper filtration and engine protection.
 
Step-by-Step Guide to Finding Your Oil Filter

1. 1. Check Your Owner’s Manual: Your vehicle’s owner’s manual is the most reliable source for the correct oil filter specifications for your specific car model. 
2. 2. Use Online Tools: Many auto parts websites and brands, like WIX Filters, offer tools where you can input your vehicle’s year, make, and model to find compatible filters. 
3. 3. Visit an Auto Parts Store: You can take this information to your local auto parts store and ask for assistance. They will be able to look up the correct filter for your vehicle. 
4. 4. Cross-Reference the Part Number: If you have the part number from your manual or old filter, you can cross-reference it with different brands to find compatible options. 
5. 5. Consider Engine Specifications and Oil Type: 
   • Engine Size: Different engines require different sizes and types of filters. 
   • Oil Type: If you use synthetic oil, choose a filter with synthetic media, as it provides better filtration for synthetic oil’s characteristics. 
   • Driving Conditions: For extreme driving conditions or towing, a heavier-duty filter might be necessary. 

Key Features to Look For

• Filter Media: The material the filter is made from, such as paper or synthetic media. 
• Anti-Drain Back Valve: This feature prevents oil from draining out of the engine when the car is off, ensuring immediate lubrication on startup. 
• Bypass Valve: The bypass valve ensures that oil can still flow to the engine if the filter becomes clogged or the oil pressure is too high. 
• Brand Reputation: Opt for well-known and reputable brands to ensure the filter’s quality and performance. 

What oil filter do I need for a 2007 Honda Accord?

For a 2007 Honda Accord, the OEM (Original Equipment Manufacturer) oil filter number is 15400-PLM-A02. This filter is also commonly cross-referenced with other part numbers like 15400-RBA-F01, 15400-PLC-004, 15400-PR3-406, 15400-P0H-305, 15400-PR3-004, 15400-RTA-004, 15400-PME-T01, 15400-RTA-003, 15400-PR3-003, 15400-RAF-T01, 15400-PT7-005, 15400-PLC-003, 15400-PT7-006, 15400-R5G-H01, 15400-RK9-F01, 15400-PH1-014, 15400-PR3-405, 15400-PH1-F03, and 15400-PH1-F02, according to HondaPartsNow.com.

What is the part number of the oil filter on a Honda?

VANLI Store | Authorised Car Auto Parts Supplier in Malaysia | Honda Oil Filter for all Honda car – 15400-PLM-A02.

What is the part number of the oil filter on a Honda Pilot?

15400-PLM-A02
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle.