What Is the Paint Code for Audi Ice Silver Metallic?

The factory paint code most commonly associated with Audi Ice Silver Metallic is LX7W, which is also referenced as 9C in some Audi documentation and touch‑up products. This code identifies the specific metallic silver formulation used by Audi and is essential when ordering paint or performing repairs.

Understanding Audi’s Ice Silver Metallic Paint Code

Audi’s Ice Silver Metallic is a distinctive, light metallic silver that has been used on a range of Audi models, especially in the late 2000s and early 2010s. The key identifier for this color in Audi’s system is the paint code LX7W. In some markets, the same color may be labeled with an internal or option code like 9C, but LX7W is the primary, global paint code used by paint suppliers and body shops.

The Main Codes Used for Ice Silver Metallic

Several related codes and labels can appear on documentation, service invoices, or paint products referring to the same Ice Silver Metallic shade. The following list summarizes the codes you are most likely to encounter.

• LX7W – Audi/VW paint code for Ice Silver Metallic (primary technical color code)
• 9C – Audi color/option code often paired with LX7W on vehicle labels or order guides
• Ice Silver Metallic – Marketing name used in brochures and configurators
• Silber Eissilber Metallic (or similar German labeling) – Manufacturer description sometimes found in European documentation

Together, these references all point to the same color formulation; however, LX7W is what paint manufacturers, body shops, and touch-up suppliers rely on to mix the correct Ice Silver Metallic finish.

How to Confirm the Code on Your Specific Audi

Although LX7W is widely recognized as the code for Ice Silver Metallic, Audi owners should always confirm the exact paint code on their own vehicle, especially for repairs or refinishing. This is because build years, regions, and model variations can sometimes introduce similar or superseding shades.

Where to Find the Paint Code on the Car

Audi typically prints the paint code on labels attached to the vehicle. These labels may vary slightly by model year and region, but they generally appear in a few consistent locations.

The following list outlines the most common places to find the paint code on an Audi:

• Service data sticker in the trunk – Often located near the spare wheel well or on the side panel inside the luggage compartment.
• Service booklet / maintenance manual – A copy of the data sticker is frequently included in the owner’s service book.
• Driver’s side door jamb – On some models and markets, a label near the door latch area will list the paint information.
• Dealer or digital records – Authorized Audi dealers can look up your vehicle’s paint code using the VIN.

By checking these locations, owners can verify that their car is indeed Ice Silver Metallic with the code LX7W (and possibly the option code 9C), ensuring that any paint ordered will match the original finish as closely as possible.

Why Verification Matters

Metallic paints are particularly sensitive to slight variations in formula, application, and age. Over time, sun exposure and weathering can subtly alter the appearance of the paint on the vehicle. For this reason, professional body shops will typically:

The following list highlights why verifying and matching the paint code is so important:

• Identify the exact factory formula using the paint code (LX7W) as a starting point.
• Use paint mixing systems from major paint suppliers (e.g., PPG, Glasurit, Spies Hecker) that reference LX7W.
• Perform spray-out cards or camera-based color matching to fine-tune the formula to the specific car’s current condition.
• Blend into adjacent panels to hide any minor variances and produce a near-invisible repair.

Confirming that your Audi is indeed finished in Ice Silver Metallic LX7W allows these processes to start from the accurate base formula, minimizing mismatches and visible repair lines.

Using the Paint Code for Touch-Up and Repairs

Once you have confirmed that your Audi uses Ice Silver Metallic LX7W, you can reference this code when purchasing any paint-related products or commissioning repair work. The code is a universal reference point across different suppliers and regions.

Ordering Touch-Up Products

For minor stone chips or scratches, many owners prefer DIY solutions such as touch-up pens, small bottles, or aerosol cans. These products are typically sold under the color name and code.

The following list shows how to correctly specify what you need when ordering Ice Silver Metallic touch-up paint:

• Provide the full code “LX7W” to the supplier or select it from their color list.
• Confirm the color name “Ice Silver Metallic” to avoid confusion with other silver shades.
• Check compatibility with your model year, as some retailers list applicability ranges (e.g., “Audi Ice Silver Metallic 2008–2015”).
• Order clearcoat if needed, since most metallic touch-ups require a basecoat plus clearcoat system.

By ordering products that explicitly reference both the color name and the paint code, you greatly increase the chances of getting a close match, even in a simple DIY repair scenario.

Professional Respray or Panel Repair

When a panel needs refinishing or the car requires more significant paintwork, professional repair is almost always the best option with metallic paints. Body shops will start by noting the paint code and then adapt from there.

The following list outlines how body shops typically handle Ice Silver Metallic LX7W repairs:

• Decode the label from your car to confirm LX7W and any variant notes in their mixing system.
• Select the appropriate formulation variant (many systems have multiple “variants” for a single code, to reflect production differences).
• Mix a small batch and spray a test panel, comparing it to the vehicle under different lighting.
• Blend adjacent panels where needed to create a seamless transition, particularly important with light metallics like Ice Silver.

This process, built around the original LX7W paint code, helps ensure the repaired area visually aligns with the rest of the vehicle once the work is complete.

Similar Audi Silver Shades and Potential Confusion

Audi has offered multiple silver and grey metallic finishes over the years, some of which can look similar to Ice Silver Metallic in photos or under certain lighting. Misidentifying the color can lead to ordering the wrong paint formula.

Commonly Confused Audi Silvers

To avoid confusion, it is helpful to know some of the other popular Audi silver and grey metallic codes. While these are different colors, owners sometimes mistake them for Ice Silver when looking at images or second-hand ads.

The following examples illustrate other Audi metallic silver/grey colors that are distinct from Ice Silver Metallic LX7W:

• LZ7S – Daytona Grey Pearl Effect – A darker grey with a pearl effect, popular on S and RS models.
• LZ7Q – Monsoon Grey Metallic – A medium-to-dark grey metallic, more muted than Ice Silver.
• LY7W – Light Silver Metallic – An older, classic Audi light silver used before Ice Silver on many models.
• LY7C – Quartz Grey Metallic – A grey with a slightly warmer tone compared with the cool, crisp look of Ice Silver.

Comparing the actual paint code on your car’s label to these alternatives is the best way to avoid ordering the wrong color, especially when buying parts or touch-up paint based on online descriptions or photos.

Summary

The paint code for Audi’s Ice Silver Metallic is LX7W, often paired with the color/option code 9C. This code is the essential reference for ordering touch-up paint, commissioning bodywork, or confirming your car’s original color. Owners can verify the code on the vehicle’s data sticker (typically in the trunk or service book), and should rely on LX7W when speaking with paint suppliers or repair shops. While Audi offers several similar silver and grey finishes, using the exact paint code ensures the closest possible match to the factory Ice Silver Metallic finish.

Is silver ice metallic the same as switchblade silver?

This color has used various names over the years for the same color. Also known as Radiant Silver, Switchblade Silver, Quicksilver, Blade Silver, Plata Brillante or Silver Ice.

What paint code is WA9795?

Dark Green Gray Metallic
ERA Paints WA9795 – Dark Green Gray Metallic for GMC Exact Match Automotive Touch Up Paint Jar – Essential Kit.

What is the color code for Audi ice silver paint?

LX7W
Audi Genuine Touch-Up Paint Ice Silver metallic LX7W/P5/X7W.

What is the paint code for silver ice metallic?

The paint code for Silver Ice Metallic is WA636R, also represented as 636R, 17, or GAN. This code is used for a variety of General Motors (GM) vehicles, including Chevrolet and GMC, and is often listed alongside the numeric code 17.
 

• Primary codes: WA636R and 636R
• Alternative codes: 17 and GAN
• Vehicle manufacturers: General Motors (GM) brands, such as Chevrolet and GMC