What Is the Part Number for the Audi Q5 Oil Filter?

The correct oil filter part number for an Audi Q5 depends on the model year and engine type; the most common genuine Audi/VW oil filter used on many 2.0 TFSI Q5 models from roughly 2009–2017 is 06L 115 562 (and its supersessions), while other engines use different part numbers. Knowing the exact engine code, model year, and sometimes production date is essential to identify the precise filter.

Why There Is No Single “One-Size-Fits-All” Oil Filter Part Number

The Audi Q5 has been produced since 2008 with a wide range of engines—petrol and diesel, four‑cylinder and six‑cylinder, and even plug‑in hybrid variants. Because of that diversity, Audi and Volkswagen Group assign different oil filter part numbers according to engine family and design updates. Using the wrong filter can lead to improper sealing, incorrect oil flow, or insufficient filtration, which may compromise engine protection.

Common Genuine Audi/VW Oil Filter Part Numbers for the Q5

The following list outlines some of the most common genuine oil filter part numbers used across major Audi Q5 engine types and model years. These examples are representative, not exhaustive, and may have regional or superseded variations.

• 06L 115 562 – Widely used on many 2.0 TFSI (EA888 Gen 2/Gen 3) engines fitted to Q5 models roughly from 2009 through mid‑2010s. Variants may include suffix letters such as 06L 115 562 B or 06L 115 562 C as the design is updated.
• 06D 115 562 – Earlier EA888/EA113‑family 2.0 TFSI engines on some early Q5s and related platforms; still occasionally seen as a superseded or backward‑compatible part, depending on cataloging.
• 06E 115 562 – Common on 3.2 FSI V6 petrol engines used in early Q5 models, where the filter design differs from the 2.0‑liter four‑cylinder units.
• 057 115 561 M / 057 115 561 Q (and similar) – Typical for 3.0 TDI V6 diesel engines fitted to Q5s in Europe and some other markets; the exact suffix letter can vary with production updates.
• 04L 115 562 – Used on some 2.0 TDI four‑cylinder diesel engines (EA288 family) in later Q5s, especially in European markets where diesel variants are more common.
• 06M 115 562 – Found on certain newer EA888‑generation petrol engines in the second‑generation Q5 (FY, from around 2017 onward), especially on 2.0 TFSI models.

These part numbers illustrate how strongly the correct filter depends on the specific engine variant. Small changes in suffix letters often indicate revised construction or updated specifications that remain compatible with particular engines.

How to Identify the Correct Oil Filter for Your Specific Q5

Because Audi’s engine lineup and parts catalog change over time, owners should verify their individual vehicle’s requirements instead of relying solely on general lists. The most reliable method is to start with the vehicle’s VIN or engine code and then confirm the filter part number in an official or trusted catalog.

Key Details You Need Before Looking Up the Filter

The following points describe the basic information you should gather before searching for an Audi Q5 oil filter part number.

• Model year – A 2011 Q5 may use a different filter than a 2018 Q5, even if both are labeled 2.0 TFSI, because internal engine generations change.
• Engine type and displacement – Identify whether your Q5 is a 2.0 TFSI, 3.0 TFSI, 3.2 FSI, 2.0 TDI, 3.0 TDI, or hybrid; each family typically has its own filter.
• Engine code – Codes like CAEB, CNCD, CREC, CAGA, or others are used in Audi documentation and are often the most precise way to match parts.
• Region/market – North American Q5s tend to be more heavily weighted to petrol engines, while European models have more diesel options; part catalogs can differ slightly by region.
• Production date – Mid‑cycle technical updates can change the filter specification within the same model year, so the exact build month and year sometimes matter.

Once this information is available, you can match it to official Audi documentation or a reliable database to obtain the exact filter part number for your vehicle.

Where and How to Confirm the Official Part Number

Several sources can provide authoritative confirmation of the correct oil filter number for your Q5. Combining more than one source helps avoid catalog errors or aftermarket mismatches.

• Audi dealer parts counter – Providing your VIN to an Audi dealership parts department is the most reliable way to get the latest superseded part number that matches your exact car.
• Official electronic parts catalogs (EPC) – Systems like ETKA (used internally by VW Group and some independent specialists) show current and superseded oil filter numbers by VIN and engine code.
• Owner’s manual or service booklet – While often listing only the oil specification, some manuals or service inserts reference original filter codes or at least the general family of components.
• Reputable online parts suppliers – Sites that allow VIN-based lookup can cross‑reference genuine Audi/VW part numbers to compatible OE‑quality aftermarket filters.
• Existing filter on the car – The filter currently installed often carries a printed part number; this can be used to cross‑reference the genuine number, with the caveat that a previous owner or shop might have used an incorrect part.

By cross‑checking one or more of these sources against your VIN or engine code, you can be confident the filter part number you purchase is accurate for your specific Audi Q5.

Why Using the Correct Oil Filter Matters

The oil filter in an Audi Q5 is not an interchangeable commodity; it is engineered around the flow rates, pressures, and packaging of each engine family. An incorrect or poor‑quality filter can lead to issues ranging from minor oil weeping at the seal to serious engine wear.

Technical Reasons to Match the Exact Part

The following points explain why sticking to the specified (or properly cross‑referenced) part number is important for engine longevity and reliability.

• Proper fit and sealing – The diameter, height, and gasket design vary between filters; using the wrong unit can cause oil leaks or inadequate sealing at the housing.
• Correct bypass valve calibration – Internal bypass valves are tuned to open at specific pressures; an incorrect calibration can allow unfiltered oil to circulate too often or, conversely, restrict flow when the oil is cold.
• Compatible media and capacity – Audi’s long‑life service intervals require filter media with sufficient dirt‑holding capacity and stability; cheaper or incorrect filters may clog earlier or degrade.
• Compatibility with housing design – Many Q5 engines use cartridge‑style filters in a fixed housing; the cartridge’s shape and end‑cap design must match that housing exactly.
• Warranty and service history – During warranty or certified‑pre‑owned coverage, using the recommended part (or OEM‑equivalent) helps avoid disputes about maintenance quality.

Together, these factors mean the oil filter part number is more than an administrative detail; it is a key component of the engine’s lubrication system and long‑term durability.

Aftermarket Cross‑References and OEM‑Equivalent Filters

Many well‑known aftermarket brands produce filters that cross‑reference to the genuine Audi/VW part numbers used in Q5 models. While high‑quality aftermarket filters can be a cost‑effective choice, it is crucial that they are explicitly listed as compatible with your exact engine and original part number.

How to Choose a Safe Aftermarket Alternative

If you opt for a non‑genuine filter, you should apply a few criteria to ensure the part is suitable and reliable.

• Check cross‑reference to the genuine number – Use the Audi/VW number (for example, 06L 115 562) as the starting point, and verify that the aftermarket filter lists it as an official cross‑reference.
• Prefer established brands – Reputable names in filtration typically meet or exceed OEM specifications and publish detailed application data.
• Confirm with VIN‑based lookup – Many aftermarket catalogs now allow VIN searches; this reinforces the match between the filter and your specific Q5 build.
• Beware of generic “fits many” listings – Avoid filters advertised broadly for multiple, unrelated models without proper catalog references, as they may compromise fit or performance.
• Retain purchase and service records – Keeping receipts and logging oil filter part numbers is useful for maintenance tracking and any future warranty or resale discussions.

Used carefully, aftermarket cross‑references can deliver OEM‑level protection while sometimes reducing cost, provided that the part is precisely matched to the original Audi specification.

Bottom Line: How to Get the Right Part Number for Your Q5

There is no single universal oil filter part number for all Audi Q5 models. While many 2.0 TFSI engines in earlier Q5s commonly use filters from the 06L 115 562 family, other petrol and diesel engines rely on different codes such as 06E 115 562, 057 115 561 M/Q, or 04L 115 562, among others. The definitive way to identify the correct part number is to look it up using your vehicle’s VIN or engine code through an Audi dealer, official EPC, or a trusted VIN‑based parts catalog.

Summary

The Audi Q5 does not have a single universal oil filter part number; the correct filter depends on the model year, engine type, and sometimes production date. A widely used genuine filter for many 2.0 TFSI Q5 engines from roughly 2009–2017 is 06L 115 562 (including updated suffix variants), but V6 petrol, V6 TDI, and later‑generation engines use different part numbers such as 06E 115 562, 057 115 561 M/Q, and 04L 115 562. To ensure accuracy, owners should confirm the filter by VIN or engine code through an Audi dealer or a reliable electronic parts catalog before purchasing or servicing.