What Is the Part Number for the Oil Filter on a 2011 Audi A4?

The most commonly used oil filter part number for a 2011 Audi A4 2.0 TFSI (the typical engine in North America and many other markets) is Mann HU 719/7 X, with the corresponding genuine Audi/VW OEM filter usually referenced as 06D 115 562 or superseding equivalents. However, the exact part number can vary by engine code and market, so checking your VIN or engine code against an official parts catalog is essential before ordering.

Why the Exact Oil Filter Part Number Can Vary

The 2011 Audi A4 was sold with several engine options worldwide, and different engines can require different oil filters. While the 2.0 TFSI four‑cylinder gasoline engine is the most common, some regions had diesel variants and other petrol options, each potentially using a different filter. As a result, there is no single “one-size-fits-all” part number for every 2011 Audi A4 built.

Most Common Filter for the 2011 Audi A4 2.0 TFSI

For the widely sold 2.0 TFSI engine (often designated by codes like CAEB, CDNC, etc.), Audi uses a cartridge‑style oil filter that sits in a housing on the engine rather than a spin‑on filter.

Typical OEM and Cross-Reference Part Numbers

The following list gives typical OEM and aftermarket oil filter part numbers that are commonly specified for a 2011 Audi A4 with the 2.0 TFSI engine. These numbers are widely used in North America and Europe but should always be verified against your vehicle’s VIN.

• Audi/VW OEM: 06D 115 562 (with later supersessions such as 06D 115 562 A / 06D 115 562 B, depending on catalog)
• Mann-Filter: HU 719/7 X
• Mahle/Knecht: OX 388D or OX 388/2D (depending on market/catalog update)
• Bosch: 72161WS or equivalent European code (varies by region)
• Fram: CH9972 or CH9972A (cartridge style)
• WIX: 57060 or 57060XP (premium version)

These cross-references all point to the same general filter specification used in the 2.0 TFSI engine family but differ by brand and internal design tweaks; sticking with an OEM or high‑quality equivalent is recommended.

Engine Variants and Why They Matter

Not every 2011 Audi A4 has the same engine. Market, trim level, and fuel type all influence which filter your car needs. The oil filter for a 2.0 TFSI gasoline engine is not necessarily the same as for a 3.2 FSI V6 or for a 2.0 TDI diesel sold in some regions.

Common 2011 Audi A4 Engine Types

The list below outlines typical engine variants found in 2011 Audi A4 models in various markets and how that can affect the oil filter part number.

• 2.0 TFSI (four‑cylinder gasoline): The most common in North America and Europe; usually uses Mann HU 719/7 X / Audi 06D 115 562 or supersession.
• 3.2 FSI V6 gasoline: Less common; uses a different cartridge or spin‑on filter type, with distinct Audi/VW part numbers not interchangeable with the 2.0 TFSI filter.
• 2.0 TDI (diesel): Found mainly in European markets; uses a diesel‑specific oil filter cartridge with its own OEM and aftermarket part numbers.
• Other localized variants: In some regions, additional engine codes may exist, each dictating a slightly different filter specification.

Because of these variations, relying only on “2011 Audi A4” without specifying engine type or VIN can lead to buying the wrong filter, especially if ordering online or from a generic parts catalog.

How to Confirm the Correct Oil Filter for Your Specific Car

To ensure you get the exact correct part number for your specific 2011 Audi A4, it is best to verify through one or more authoritative sources rather than relying solely on generic fitment guides.

Steps to Verify the Part Number

The following steps explain how drivers can accurately confirm the correct oil filter for their particular car, accounting for engine code, region, and any superseded parts.

1. Check your VIN (Vehicle Identification Number): Use the 17‑character VIN on the dashboard or door jamb; a dealer or reputable online parts catalog can use this to match the exact oil filter.
2. Identify your engine code: Codes like CAEB, CDNC, etc., may be printed on a label under the hood or in the service booklet and are used in Audi parts systems to look up the correct filter.
3. Consult an official Audi dealer or ETKA-based catalog: The dealer’s parts department or an authorized online catalog that mirrors Audi’s ETKA system will show the current correct part number and any supersessions.
4. Check the existing filter housing and markings: On cartridge setups, the cap or housing may include part references; if a genuine filter was previously used, its box or print can help confirm the correct number.
5. Cross-reference with reputable brands: Once you know the correct Audi/VW OEM number, use brand catalogs (Mann, Mahle, Bosch, WIX, etc.) to find an approved equivalent, if you prefer aftermarket.

By following these steps, owners can be confident that the oil filter they purchase is properly matched to the vehicle’s engine and will meet the manufacturer’s specifications.

Why Using the Correct Filter Matters

Oil filters are not interchangeable at random; differences in dimensions, bypass valve pressure, and filtration media can affect engine longevity and performance. Audi designs its lubrication system around a specific filter specification.

Risks of Using the Wrong Oil Filter

The list below highlights potential issues that can arise if a non‑compatible or incorrect oil filter is installed on a 2011 Audi A4.

• Oil leaks or poor fit: A filter that is too short, too long, or has the wrong sealing design can cause leaks or improper sealing, leading to loss of oil pressure.
• Insufficient filtration: A filter not matched to Audi’s specifications might allow more particles through, accelerating engine wear.
• Bypass valve problems: An incorrect bypass valve pressure can cause unfiltered oil to circulate too early or, conversely, restrict oil flow at high RPM or in cold starts.
• Potential warranty or liability issues: For vehicles still under extended warranties or service plans, non‑approved filters may complicate claims if engine damage occurs.

Choosing a correct OEM or high‑quality equivalent filter significantly reduces these risks and helps maintain consistent oil pressure and engine protection over time.

Summary

For a typical 2011 Audi A4 equipped with the common 2.0 TFSI gasoline engine, the widely recognized oil filter is the Mann HU 719/7 X, corresponding to the genuine Audi/VW part number 06D 115 562 (with possible lettered supersessions). Because 2011 A4 models were sold with multiple engines worldwide, the only fully reliable way to confirm the correct filter is to check your VIN or engine code against an official Audi parts catalog or a trusted parts supplier’s database. Using the right filter is crucial for proper lubrication, engine protection, and long‑term reliability.

How do I know what size oil filter I need?

You can find the correct oil filter size by checking your car’s owner’s manual, which provides the manufacturer’s specifications. Alternatively, you can use online lookup tools by entering your car’s make, model, and year, or by taking your old filter to an auto parts store to match it with a new one. 
This video explains how to choose the right oil filter for your car: 59sFlatironsTuningYouTube · May 15, 2023
Methods to find the correct oil filter size

• Consult the owner’s manual: This is the most reliable method, as it provides the exact specifications recommended by the vehicle’s manufacturer. 
• Use online lookups: Many auto parts store websites have a “vehicle finder” tool. You can enter your car’s details (make, model, year, and sometimes engine size) to see a list of compatible filters. 
• Look up your VIN: You can take your Vehicle Identification Number (VIN) to a dealership, and they can look up the correct part number for you. 
• Match your old filter: Take the old filter to an auto parts store. The staff can help you find a new one that is compatible with your old one. 
• Cross-reference part numbers: If you have the part number from your old filter, you can use it to find cross-reference numbers online. For example, searching for “Supertech ST 9688” will show you compatible replacements from other brands. 

What is the part number for the oil filter on a 2014 Audi A4?

06D115562
Shop 2014 Audi A4 2.0L A/T Quattro Engine Oil Filter Element. Part included with adapter. Part included LITER, Housing, VIN, AWD – OEM Audi Part # 06D115562 (06D-115-562)

What type of oil does a 2011 Audi A4 take?

STP Full Synthetic Engine Oil 5W-30 5 Quart.

What is the part number for the Audi A4 oil filter?

The Audi A4 oil filter part number varies by model year and engine, but a common part for 2.0L turbocharged engines (B8 generation) is 06J115403Q. For newer models, especially those with a 3.0L engine like the S4, the part number is often 06M198405F. It is crucial to check the specific vehicle’s year, engine, and VIN to ensure the correct part is ordered. 

Audi A4 Generation	Engine Option	Recommended Oil Filter Part Number
B8 (2009-2018)	2.0L Turbocharged I4	06J115403Q
B9 (2017-2021)	2.0L Turbocharged I4	MANN Filter HU 6013 z
B9 (2017-2021)	3.0L Engine	06M198405F

(function(){
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector(“div”);var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName(“g-left-button”)[0],b=d.getElementsByTagName(“g-right-button”)[0];a&&b&&(e=RegExp(“\\btHT0l\\b”),f=RegExp(“\\bpQXcHc\\b”),a.className=a.className.replace(e,””),b.className=b.className.replace(e,””),h===0?a.className=”pQXcHc “+a.className:(a.className=
a.className.replace(f,””),k&&c.classList.add(“pA30Ne”)),h===g?b.className=”pQXcHc “+b.className:(b.className=b.className.replace(f,””),k&&c.classList.add(“FpCCub”)),setTimeout(function(){a.className+=” tHT0l”;b.className+=” tHT0l”},50))}};}).call(this);(function(){var id=’_FKUoadTJEYOOxc8P5bzC6AM_515′;var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
Note:

• Some older models may use different part numbers, such as 06A115561B.
• Always verify the part number with your vehicle’s specifications to ensure compatibility.