What Is the Oil Filter Part Number on the Audi Q7?

The most common genuine Audi/VW oil filter part numbers for the Audi Q7 are 06M 115 562, 06M 115 562 A, and 06M 115 562 B for many 3.0 TFSI and 2.0 TFSI engines from mid‑2010s onward, but the exact part number depends on model year, engine code, and market. Because Audi used several different engines in the Q7, owners must check the vehicle’s VIN, engine code, or parts catalog to confirm the correct filter.

Why There Is No Single Universal Oil Filter Part Number

The question sounds simple, yet the answer is complicated by the Audi Q7’s broad model range. Since its launch in 2006, the Q7 has been sold with multiple gasoline and diesel engines, across three generations, and in different markets. Each engine family may use a different oil filter type and part number, and some have changed over the years due to supersessions and technical updates.

Key Factors That Determine the Correct Audi Q7 Oil Filter

Before looking at specific part numbers, it is important to understand why the exact filter depends on several technical details and why drivers should not rely on a single generic answer.

• Model year and generation: The Audi Q7 spans three generations: first generation (Typ 4L, roughly 2006–2015), second generation (Typ 4M, from about 2015 onward), and a later facelift within the 4M line. Each generation introduced new engine families and, with them, different filter designs.
• Engine type and displacement: The Q7 has been offered with V6 and V8 gasoline (TFSI) and diesel (TDI) engines, as well as four‑cylinder 2.0 TFSI units in certain markets. Each engine family typically uses its own oil filter configuration.
• Engine code: Audi engines are identified by a three‑ or four‑letter engine code (for example, CREC, CGQB, CASA, CZZA). Parts catalogs use these codes to match the correct oil filter.
• Regional differences: North American models often differ from European or other‑market variants in both engines and emissions equipment. As a result, filters that fit an EU‑spec 3.0 TDI, for instance, may not apply to a U.S. gasoline Q7.
• Superseded part numbers: Audi and Volkswagen periodically update components. An older filter part number may be superseded by a new one, meaning the original is replaced in the catalog with an updated part that physically fits and functions the same or better.

Taken together, these factors explain why there is no single, definitive oil filter part number for all Audi Q7 models, and why owners are urged to confirm specifics for their exact vehicle.

Common Genuine Oil Filter Part Numbers by Q7 Generation

While the only fully reliable way to identify the correct part is by searching parts data with the vehicle’s VIN or engine code, some oil filter part numbers appear frequently across the Q7 lineup, especially in the more recent 4M generation.

Second Generation (4M, approx. 2015–present): Common TFSI and TDI Filters

In the current 4M Q7 range, many 3.0 TFSI V6 and some 2.0 TFSI variants, along with several 3.0 TDI diesels in certain markets, share a family of cartridge‑style oil filters whose part numbers fall under the “06M 115 562” umbrella.

• 06M 115 562 – Core VW/Audi cartridge oil filter part number used on many 3.0 TFSI (supercharged/then turbocharged) and some 2.0 TFSI engines fitted to the Q7 (4M). This number is common in parts catalogs and aftermarket cross‑references for mid‑2010s and newer Audi longitudinal engines.
• 06M 115 562 A – Updated/superseding variant of the same filter family used on certain 4M Q7 engines. In many official catalogs, this replaces the base 06M 115 562 and is the version supplied over the parts counter.
• 06M 115 562 B – Later supersession in the same series; on some engines, 06M 115 562 and 06M 115 562 A are replaced in the catalog by 06M 115 562 B. Functionally, this remains a direct replacement cartridge element for the same oil filter housing.
• Market‑specific TDI filters (03N‑/04M‑ series) – For certain 3.0 TDI and mild‑hybrid diesels in Europe and other regions, filters with part numbers in series such as 03N 115 562 or 04M 115 562 may appear. These are closely related cartridge designs tailored to specific diesel engines and emissions layouts.

These part numbers are among the most frequently encountered in online catalogs for the modern Q7, but they should still be verified against the vehicle’s VIN or engine code before purchase or installation.

First Generation (4L, approx. 2006–2015): Older TDI and FSI/TFSI Filters

The original Q7 (4L) used an earlier generation of Audi/VW oil filter designs. Owners of these vehicles will encounter a different set of part numbers, reflecting the older 3.0 TDI, 4.2 TDI, 3.6 FSI, and 4.2 FSI engines.

• 06E 115 562 – Commonly associated with earlier V6/V8 gasoline engines such as the 3.2/3.6 FSI and 4.2 FSI in Audi applications, and used on some Q7 4L petrol models. This is also a cartridge‑type filter element.
• 057 115 561 / 057 115 561 K – Frequently found on 3.0 TDI and 4.2 TDI engines in the 4L Q7. Audi updated the suffix letter over time (e.g., from no suffix to K), but the later part typically supersedes the earlier without changes to fitment.
• Other 057‑ and 07Z‑ series filters – Certain high‑output or special‑market diesel engines used in the Q7 4L may employ different, but closely related, filters in the 057 or 07Z part‑number families.

Because first‑generation Q7 engines vary widely by region and year, it is particularly important for owners of these vehicles to cross‑check part numbers with official Audi documentation or a dealer’s electronic parts catalog.

How to Identify the Correct Oil Filter for Your Specific Q7

Given the wide range of engines and the multiple supersessions of part numbers, owners are best served by a systematic approach to identifying the correct filter rather than relying on generic tables.

• Use the VIN in an official catalog: The most reliable method is to have an Audi dealer or an official electronic parts catalog (EPC) look up the oil filter using the vehicle’s full VIN. This accounts for production date, engine code, and region.
• Check the engine code: The engine code can usually be found on a label in the engine bay or in the vehicle documentation. Once known, this code can be used in many online parts catalogs to filter results to the correct oil filter part number.
• Consult the owner’s manual and service booklet: While these documents often do not list the raw part number, they specify the required oil specification and sometimes reference the filter type or family, which helps confirm catalog searches.
• Cross‑reference with reputable aftermarket brands: Brands such as Mann, Mahle, Bosch, and Hengst offer Q7‑specific filters. Their online catalogs allow you to select your exact model, year, and engine, and will then show both their own part number and the equivalent Audi/VW OE number.
• Physically compare when replacing: When changing the filter, ensure the new cartridge or spin‑on unit matches the old one in diameter, height, and sealing arrangement, and that the part number corresponds to one that is specified for your Q7’s engine.

This multi‑step approach minimizes the risk of installing an incorrect filter, which could lead to oil leaks, poor filtration, or even engine damage over time.

Risks of Using the Wrong Oil Filter

Choosing the wrong filter for an Audi Q7 is not just a minor parts mistake; it can have serious mechanical and financial consequences, particularly on high‑value engines with tight tolerances and long‑life service intervals.

• Incorrect sealing and leaks: A filter with the wrong dimensions or gasket design may not seal properly against the housing or block, causing oil leaks under pressure.
• Bypass valve mismatch: Different engines require specific bypass (pressure relief) characteristics inside the filter. A mismatch could either starve the engine of oil under cold‑start or high‑load conditions, or let unfiltered oil circulate excessively.
• Reduced filtration efficiency: Off‑spec filters may have different media or surface area, leading to poorer filtration, faster clogging, or compromised protection over long service intervals.
• Warranty and liability issues: Using a non‑approved or incorrect filter can complicate warranty claims and may be cited as a cause if engine damage occurs shortly after a service.

These risks underline why Audi and independent specialists stress the use of the correct, engine‑specific oil filter rather than simply “something that fits” the housing thread or size.

Practical Guidance for Audi Q7 Owners

For Q7 owners planning an oil change or checking work done by a workshop, several practical steps can make the process safer and more transparent.

• Ask for the exact part number: When a dealer or independent shop services the vehicle, request the oil filter part number used on the invoice. This allows you to check it against Audi documentation or reputable online catalogs.
• Prefer OEM or OE‑equivalent filters: Filters from Audi/VW (original equipment) or from the OE manufacturers (such as Mann, Mahle, or Hengst) ensure compatibility with Audi’s design and testing.
• Record service details: Note the mileage, date, oil specification, and filter part number for each oil change. This record becomes valuable for resale, diagnostics, and future parts purchases.
• Be cautious with generic online listings: Many online marketplaces list “fits Audi Q7” filters without specifying engine codes or years. Always cross‑check such listings using a VIN‑based or engine‑code‑based catalog.

By taking these steps, owners can significantly reduce the risk of incorrect parts usage and maintain the long‑term reliability of their Q7’s engine.

Summary

There is no single universal oil filter part number for the Audi Q7. For many second‑generation Q7 (4M) models with 3.0 TFSI and 2.0 TFSI engines—and some corresponding TDIs—the genuine Audi/VW oil filter commonly appears as 06M 115 562 and its superseding variants 06M 115 562 A and 06M 115 562 B. First‑generation Q7 (4L) models with older petrol and diesel engines typically use different families of filters such as 06E 115 562 and 057 115 561 (and its suffix variants). However, the precise, correct part depends on the vehicle’s model year, engine type, and engine code. The only fully reliable method is to confirm the part number via the VIN or engine code in an official Audi parts catalog or with a trusted dealer or specialist.

How do I know what size oil filter I need?

You can find the correct oil filter size by checking your car’s owner’s manual, which provides the manufacturer’s specifications. Alternatively, you can use online lookup tools by entering your car’s make, model, and year, or by taking your old filter to an auto parts store to match it with a new one. 
This video explains how to choose the right oil filter for your car: 59sFlatironsTuningYouTube · May 15, 2023
Methods to find the correct oil filter size

• Consult the owner’s manual: This is the most reliable method, as it provides the exact specifications recommended by the vehicle’s manufacturer. 
• Use online lookups: Many auto parts store websites have a “vehicle finder” tool. You can enter your car’s details (make, model, year, and sometimes engine size) to see a list of compatible filters. 
• Look up your VIN: You can take your Vehicle Identification Number (VIN) to a dealership, and they can look up the correct part number for you. 
• Match your old filter: Take the old filter to an auto parts store. The staff can help you find a new one that is compatible with your old one. 
• Cross-reference part numbers: If you have the part number from your old filter, you can use it to find cross-reference numbers online. For example, searching for “Supertech ST 9688” will show you compatible replacements from other brands. 

What kind of oil filter does a 2019 Audi Q7 take?

Mobil 1 Extended Performance Premium Oil Filter M1C-258A.

Where is the oil filter on an Audi Q7?

The Audi Q7 oil filter is located under the engine’s plastic cover, beneath the airbox assembly. After removing the decorative engine cover, you will find the filter housing, which typically requires a 36mm or 32mm socket to open, depending on the specific model year.
 
This video demonstrates how to locate and access the oil filter housing on an Audi Q7: 1mMetaloop DIY – Cars and ToolsYouTube · Mar 31, 2023
Steps to find the oil filter 

• Open the hood and remove the engine cover: Pop off the decorative engine cover by gently pulling up on its corners or by unclipping any latches, as shown in this YouTube video and this YouTube video. 
• Locate the airbox: Once the cover is removed, you will see the airbox assembly. The oil filter housing is located underneath it. 
• Access the filter housing: You will need to remove the airbox to get to the filter. This may involve disconnecting some sensors and unlatching clips. 
• Find the filter housing: The oil filter is housed inside a cylindrical plastic cap. You can now see the filter housing, which often requires a 36mm or 32mm socket to unscrew. 

This video shows how to remove the airbox to get to the oil filter housing: 47sNik BeisertYouTube · Jun 25, 2022

What is the oil filter part number for a 2014 Audi Q7?

2014 Audi Q7 Engine Oil Filter Element – 059198405 – Genuine Audi Part.