What is the psi of a Honda Click 125i?
The typical recommended tire pressure for a Honda Click 125i is 29 psi (200 kPa) for the front tire and 33 psi (225 kPa) for the rear tire when riding solo; increase the rear to about 36 psi (250 kPa) when carrying a passenger or heavier cargo. These values should be checked and set when the tires are cold and verified against the sticker on the scooter or the owner’s manual for your specific model year and market.
Contents
Why tire pressure matters on the Click 125i
Correct tire pressure affects stability, braking distance, tire wear, fuel economy, and ride comfort. On lightweight scooters like the Click 125i (marketed as the Vario 125 in some countries), even a small deviation can noticeably change handling. Underinflation can cause heat buildup and premature wear; overinflation can reduce grip and make the ride harsh.
Recommended pressures by load
The figures below reflect typical factory guidance published for recent Honda Click 125i/Vario 125 models in Southeast Asian markets. Always verify against the tire-information label (often under the seat or on the swingarm) and your owner’s manual, as local specs and tire fitments can differ slightly.
- Solo riding: Front 29 psi (200 kPa), Rear 33 psi (225 kPa)
- With passenger or heavier load: Front 29 psi (200 kPa), Rear 36 psi (250 kPa)
These pressures are intended for standard OEM tire sizes and general road use. If you have non-OEM tires, unusual loads, or specialized use (e.g., long highway runs, very rough roads), consult the tire manufacturer’s guidance alongside Honda’s recommendations.
Where to find the official spec
Honda places the official tire-pressure sticker on the scooter (commonly under the seat, on the frame rail, or on the swingarm). The same numbers appear in the owner’s manual under the “Tires” or “Maintenance” section. If either is unavailable, a Honda dealer can confirm the correct pressures for your specific year and trim.
How to check and set tire pressure
Use the following steps to ensure your Click 125i’s tires are set correctly and safely before riding.
- Measure pressure when tires are cold (before riding or at least three hours after the last ride).
- Use a reliable, calibrated gauge; gas-station gauges can be inconsistent.
- Adjust to the recommended psi for your load (solo or with passenger/cargo).
- Inspect tires for cuts, bulges, or uneven wear; confirm valve caps are in place.
- Recheck monthly, and before long trips or big temperature swings; cold weather often lowers pressure.
If you’re unsure whether your riding qualifies as “heavier load,” use the higher rear pressure when regularly carrying a passenger, luggage, or riding at sustained higher speeds.
Typical tire sizes on the Click 125i
Many Click 125i models ship with small-diameter scooter tires, commonly around 80/90-14 (front) and 90/90-14 (rear), though exact sizes vary by market and year. The recommended psi above is tuned for OEM-equivalent sizes; if your scooter has different tire dimensions or brands, double-check both the Honda spec and the tire maker’s guidance.
Summary
For a Honda Click 125i, set the front tire to about 29 psi and the rear to 33 psi for solo riding; increase the rear to roughly 36 psi when carrying a passenger or extra load. Check pressures cold, verify with the sticker/manual for your exact model, and monitor monthly for optimal safety and performance.
What PSI should Honda tires be at?
between 32-36 PSI
As a rule of thumb, tire pressure should usually be between 32-36 PSI.
How much PSI for Honda Click 125i?
29 33
Motorbike Tire Pressures
| Bike model | Front | Back |
|---|---|---|
| Honda Scoopy 110 | 29 | 33 |
| Honda Click 125 | 29 | 33 |
| Honda Click 160 | 29 | 33 |
| Honda PCX 160 | 29 | 36 |
What is the correct PSI for scooter tires?
The recommended tire pressure for electric scooter tires typically falls within the range of 40 to 50 PSI (pounds per square inch). However, the specific PSI for your scooter model should be referenced in the owner’s manual or on the tire sidewall itself.
Factors Affecting Tire Pressure:
- Scooter Model and Tire Size: . Opens in new tabDifferent scooters and tire sizes may have different optimal PSI levels.
- Rider Weight: . Opens in new tabHeavier riders may need slightly higher pressure, while lighter riders may prefer lower pressure.
- Riding Conditions: . Opens in new tabRiding on rough terrain may require slightly lower pressure for better grip and comfort.
- Temperature: . Opens in new tabColder temperatures can cause a decrease in tire pressure, while hotter temperatures can cause over-inflation.
Checking and Maintaining Tire Pressure:
- Locate the recommended PSI: Refer to your scooter’s manual, the tire sidewall, or the manufacturer’s website.
- Use a reliable pressure gauge: Ensure your pressure gauge is accurate for precise measurements.
- Regularly check and adjust: Check tire pressure before each ride and adjust as needed to maintain optimal levels.
Consequences of Improper Tire Pressure:
- Underinflation: Can lead to reduced range, increased rolling resistance, and potential for pinch flats or tire damage.
- Overinflation: Can result in a harsher ride, reduced traction, and increased risk of blowouts or tire damage.
Is 40 PSI too high for motorcycle tires?
Regardless of the type of bike you have, you will want to choose the correct PSI tires for your needs. Depending on the type of motorcycle you own, your manufacturer may recommend a different PSI for the tires. Motorcycle tires, however, should be inflated between 28 and 40 psi. You should never exceed this number.
