What is the torque spec of the 2019 Honda CR‑V?

It depends on what you mean by “torque spec.” For engine output, the 2019 Honda CR‑V makes 179 lb‑ft (1.5L turbo) or 180 lb‑ft (2.4L). If you’re asking about the wheel lug nuts, the factory torque is 80 lb‑ft (108 N·m). Below are the details and additional common torque values owners often look for.

Understanding which torque spec you need

Automotive “torque specs” can refer either to the engine’s torque output (a performance figure) or to the tightening torque for fasteners during maintenance (like wheel lug nuts or an oil drain plug). Clarifying the context ensures you use the correct number and avoid damage or unsafe conditions.

Engine torque ratings

1.5‑liter turbocharged inline‑4 (L15B7)

Most 2019 CR‑V trims use Honda’s 1.5‑liter turbo engine, rated at 190 hp and 179 lb‑ft of torque, with peak torque available broadly from about 2,000 to 5,000 rpm. This broad plateau helps the CR‑V feel responsive in everyday driving.

2.4‑liter naturally aspirated inline‑4 (K24W)

The 2019 CR‑V LX in some markets features the 2.4‑liter engine, rated at 184 hp and 180 lb‑ft of torque, with peak torque typically around 3,900 rpm. Availability varies by region and trim.

Common maintenance torque specs

For routine service, these are the factory torque values most owners and technicians need. Always verify for your exact market and trim in the owner’s manual or service information.

• Wheel lug nuts: 80 lb‑ft (108 N·m)
• Engine oil drain plug: 30 lb‑ft (40 N·m); use a new crush washer
• Spark plugs: 13 lb‑ft (18 N·m) on a cold engine
• Oil filter: tighten by hand 3/4 turn after gasket contact; if using a torque wrench, about 12–14 lb‑ft (16–19 N·m)

These values help prevent under‑ or over‑tightening that can lead to leaks, warped components, or fastener damage. After wheel service, re‑check lug nut torque after 25–50 miles of driving.

Where to find your exact specification

You can confirm torque values directly from Honda’s documentation and labels. The steps below show where to look and how to verify quickly.

1. Check the owner’s manual: see the Specifications and Maintenance sections.
2. Look for under‑hood labels: some torque and plug information may be printed there.
3. Consult Honda Service Information or a dealer: for trim‑specific procedures and torque charts.
4. Use trusted repair databases: ensure they reference the 2019 model year and your exact engine.

Following official sources helps ensure the numbers match your vehicle’s configuration and regional specifications.

Summary

For a 2019 Honda CR‑V, engine torque is 179 lb‑ft (1.5L turbo) or 180 lb‑ft (2.4L), and the wheel lug nut torque is 80 lb‑ft (108 N·m). For common maintenance, use 30 lb‑ft (40 N·m) on the oil drain plug, 13 lb‑ft (18 N·m) on spark plugs, and hand‑tighten the oil filter per instructions (roughly 12–14 lb‑ft if torqued). Always verify against your owner’s manual or official service information for your exact trim and market.

What is the torque spec for the 2019 Honda CR-V?

The 2019 Honda CR-V is equipped with a 2.4L 4-cylinder engine, which delivers 184 horsepower and 180 lb-ft of torque. Not enough power? Try the available 1.5L VTEC® turbo 4-cylinder engine, which kicks out 190 horsepower and 179 lb-ft of torque.

What is the torque on the bolts on a Honda CR-V?

80 lb-ft
Torque Specifications: When installing wheels on a CR-V, the recommended torque specification is 108 Nm (80 lb-ft), which should be applied in a star pattern for proper wheel seating.

What is the torque on the lug nuts on a 2019 Honda CR-V?

The lug nut torque for a 2019 Honda CR-V is 80 lb-ft (108 N·m). Always use a torque wrench to tighten the lug nuts in a star-shaped pattern, and for the most accurate specification for your vehicle, refer to your owner’s manual. 
Steps to Tighten Lug Nuts:

1. 1. Locate the correct torque: . Opens in new tabCheck your 2019 Honda CR-V’s owner’s manual for the precise lug nut torque specification. 
2. 2. Set the torque wrench: . Opens in new tabAdjust your torque wrench to the specified 80 lb-ft (108 N·m). 
3. 3. Tighten in a star pattern: . Opens in new tabOnce the lug nuts are snug, use a torque wrench and tighten them in a star or crisscross pattern to ensure even pressure. 
4. 4. Listen for the click: . Opens in new tabThe torque wrench will click to indicate the correct torque has been reached for each lug nut. 
5. 5. Verify the torque: . Opens in new tabIt’s a good practice to re-check the torque after driving a short distance to prevent damage from loose lug nuts. 

What is the torque setting for wheel nuts on a Honda CR-V?

Do not use a tire lever to install and remove the tires as it may cause damage to the tire and aluminum wheel. The wheel nut torque is 108 N·m (11.0 kgf·m, 80 lbf·ft). This kit should be installed only if the ambient air temperature is 60°F (15°C) or above.