What Kind of Oil a 2019 Audi RS5 Takes

A 2019 Audi RS5 requires fully synthetic engine oil that meets Audi/VW specification VW 502 00 (or 504 00 where applicable), most commonly in SAE 0W-40 or 5W-40 viscosity; popular choices in North America include Audi-branded oil, Castrol Edge 0W-40, Mobil 1 0W-40, or similar products explicitly labeled as meeting VW 502 00.

Understanding the 2019 Audi RS5’s Oil Requirements

The 2019 Audi RS5 uses a 2.9-liter twin-turbo V6 (engine code often referred to as EA839) that runs hot, makes high power, and relies on precise lubrication. Because of that, Audi specifies a strict oil standard rather than just a viscosity grade. This means that when shopping for oil you must prioritize the manufacturer approval codes on the bottle over brand loyalty or generic “European formula” labels.

The Official Specification: VW 502 00 (and 504 00)

For most driving conditions and oil-change intervals, Audi specifies oils that meet VW 502 00 for the 2019 RS5. Some newer long-life oils that meet VW 504 00 may also be compatible where local dealer guidance and owner’s manual allow, but 502 00 remains the core requirement in many markets.

The following list explains what these key Audi/VW specifications mean from a practical perspective.

• VW 502 00: High-performance gasoline engine specification designed for engines like the RS5’s twin-turbo V6; emphasizes high-temperature stability, deposit control, and wear protection.
• VW 504 00: Newer “long-life” standard, typically low-SAPS for use with modern emissions systems; may be factory-fill or dealer-fill in some regions for extended service intervals.
• Fully synthetic only: Both specifications require fully synthetic formulations, not conventional or semi-synthetic oils.
• Check the label: The bottle should explicitly state “VW 502 00” or “VW 504 00” approval (not just “meets requirements” without formal approval).

In practical terms, if the bottle clearly lists VW 502 00 (or 504 00 where approved by your dealer/region) and the viscosity suits your climate, it is generally suitable for the 2019 RS5.

Recommended Viscosity Grades for the RS5

Viscosity describes how thick or thin the oil is at cold start and at operating temperature, and it matters for engine protection, cold-start performance, and fuel economy. Audi’s recommended viscosities can vary slightly by market and climate, but for the 2019 RS5, 0W-40 or 5W-40 synthetic oils are widely accepted and commonly used.

The following list outlines the most typical viscosity options and when they are preferred.

• 0W-40: Excellent for cold starts and broad temperature ranges; widely recommended and often used as a default in North America and Europe for performance VAG engines.
• 5W-40: Also common; slightly thicker at cold start than 0W-40 but still appropriate for most climates; often specified in some dealer networks.
• 0W-30 / 5W-30 (VW 504 00 oils): In some regions and for long-life service intervals, Audi dealers may use a 0W-30 or 5W-30 oil that meets VW 504 00; always confirm with your local dealer and manual before choosing these.
• Extreme temperatures: In very hot or severe driving contexts, many enthusiasts favor 0W-40 or 5W-40 for extra high-temperature film strength.

While multiple viscosities can be technically acceptable, sticking with 0W-40 or 5W-40 that meets the correct VW spec provides a strong, broadly suitable choice for most RS5 owners.

Common Brands and Products That Meet Audi’s Requirements

Although Audi does not require one specific brand, many mainstream oils are engineered specifically to satisfy VW/Audi approvals. Availability will vary by country, but several widely sold products meet or exceed the RS5’s needs.

The list below highlights popular oils often used in or approved for 2019 Audi RS5 models, provided they show the required VW spec on the label.

• Audi Genuine Oil: Typically a 0W-40 or 5W-40 fully synthetic oil branded by Audi and filled by a major oil company under VW 502 00/504 00 approvals; usually what dealers use.
• Castrol Edge 0W-40 A3/B4 (or similar Edge variants): Frequently carries VW 502 00/505 00 approvals and is commonly recommended for high-performance VW/Audi engines.
• Mobil 1 0W-40 (FS / European Car Formula): One of the most widely known VW 502 00-approved oils; often used by independent European specialists.
• Liqui Moly Top Tec / Leichtlauf lines: Several Liqui Moly products carry VW 502 00 or 504 00 approvals; a popular choice among Audi enthusiasts in Europe and North America.
• Shell Helix Ultra / Pennzoil Platinum Euro: Certain “Euro” formulations are engineered to meet VW 502 00/504 00; verify exact spec on the back label.

While brand choice can be based on availability, price, or personal preference, confirmation of the VW 502 00 or 504 00 approval on the bottle is the decisive factor for compatibility with a 2019 RS5.

How Much Oil the 2019 RS5 Engine Takes

Knowing the correct quantity is as important as choosing the right oil. Over- or under-filling can lead to problems ranging from warning lights to potential mechanical damage in a high-performance engine like the RS5’s.

The following list provides typical capacity guidance and practical tips, but always verify against the owner’s manual and dipstick/electronic level readout.

• Approximate capacity: Around 7–8 liters (roughly 7.4–8.5 quarts) with filter change, depending on specific engine variant and market; consult the owner’s manual for the exact figure.
• Filling approach: Add slightly less than the stated capacity first, run the engine briefly, then check the oil level and top up gradually.
• Measurement method: Many RS5s use an electronic oil-level display in the MMI; follow the on-screen procedure (engine warm, level surface, short wait period) or use a dipstick if equipped.
• Avoid overfilling: Too much oil can foam, stress seals, and in extreme cases harm the catalytic converters and turbochargers.

Treat the manual’s capacity figure as a guideline, not a target to hit in a single pour; incremental top-ups and level checks are the safest method.

Service Intervals and Driving Conditions

The correct oil is only part of the equation; how often it is changed is crucial for the RS5’s long-term reliability, especially given its turbocharged, performance-focused design and the additional stress of spirited driving.

The list below summarizes typical service interval practices and how different driving styles may alter them.

• Standard interval (many regions): About 10,000 miles or 1 year (approximately 15,000 km), whichever occurs first, when using approved long-life oil and under normal driving.
• Severe service: For frequent short trips, repeated cold starts, track use, heavy stop–go traffic, or very hot/cold climates, many owners shorten intervals to 5,000–7,500 miles (8,000–12,000 km).
• Track and aggressive driving: Hard driving and track days generate extreme heat; changing oil more frequently and checking levels often is strongly advised.
• Warranty considerations: During warranty, follow the service schedule outlined by Audi and keep records of oil type, spec, and mileage at each change.

Matching your oil-change frequency to how the car is actually used, rather than just time or mileage alone, offers the best protection for the RS5’s engine and turbochargers.

How to Verify the Correct Oil for Your Specific RS5

Because details can differ slightly based on region, emissions package, and service program, owners should always verify the recommendation that applies to their exact vehicle and local conditions.

The following list outlines straightforward steps to confirm you are using the correct oil.

• Check the owner’s manual: Look for the engine oil section; it will list approved VW specifications (such as 502 00 or 504 00) and recommended viscosities.
• Consult the under-hood sticker: Some markets include an oil-spec sticker near the radiator support or oil fill cap.
• Ask an Audi dealer or reputable specialist: Provide your VIN so they can see the exact build data and any market-specific requirements.
• Inspect the bottle carefully: Ensure the exact VW approval (e.g., “VW 502 00”) is printed on the label, not just generic “recommended for European cars.”

By combining the guidance from your manual, dealer, and oil-label information, you can confidently select an oil that aligns with Audi’s engineering and warranty expectations.

Summary

The 2019 Audi RS5 is engineered to run on fully synthetic oil that meets Audi/VW specification VW 502 00 (with VW 504 00 also used in some long-life service programs), most commonly in 0W-40 or 5W-40 viscosity. Trusted options include Audi Genuine Oil, Castrol Edge 0W-40, Mobil 1 0W-40, and similar products explicitly approved to VW 502 00/504 00. The engine typically holds around 7–8 liters with a filter change, but the exact amount and service intervals should always be confirmed through the owner’s manual and local dealer. Ensuring the correct specification, viscosity, quantity, and change frequency is key to protecting the RS5’s twin-turbo V6 and maintaining performance over the long term.

What oil does the 2019 Audi RS5 take?

AMSOIL 0W-30 MS 100% Synthetic European Motor Oil.

What kind of oil does an Audi RS take?

5W-40 – Recommended for high-performance Audi S and RS models.

What kind of oil does a RS5 take?

Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil, 5 Quart (Part No. 15980E)

What kind of oil does a 2019 Audi take?

Castrol EDGE Full Synthetic Engine Oil 5W-40 1 Quart.