What Kind of Oil Filter Does a 2019 Hyundai Santa Fe Take?

A 2019 Hyundai Santa Fe typically uses a canister-style spin-on oil filter with part numbers such as Hyundai OEM 26300-35503 or 26300-35505, but the exact filter depends on the engine (2.4L, 2.0L turbo, or 3.5L V6) and whether you choose OEM or aftermarket equivalents. Understanding your engine type, OEM specifications, and compatible aftermarket brands is key to selecting the correct filter.

Understanding the 2019 Hyundai Santa Fe Engine Options

The 2019 Santa Fe lineup includes multiple engines, and the correct oil filter is tied directly to which engine is under the hood. While many filters are mechanically similar, using the wrong one can affect fitment, sealing, and, in some cases, warranty compliance.

Main Engine Configurations for 2019 Santa Fe (U.S. Market)

The following list outlines the most common engine options in the 2019 Hyundai Santa Fe sold in North America and how they relate to oil filter selection.

• 2.4L 4-cylinder (GDI, non-turbo): Common in SE and SEL trims; uses a standard spin-on filter specified by Hyundai.
• 2.0L turbocharged 4-cylinder: Included in higher trims (e.g., Limited 2.0T); typically uses the same style of spin-on filter as the 2.4L but always confirm by part number.
• 3.5L V6 (primarily Santa Fe XL / some markets): Used in three-row configurations or certain markets; the filter may share part numbers with the 2.4L/2.0T but should be verified against the engine code.

Knowing your engine size and trim level is the first step to narrowing down the correct filter, and cross-checking with the VIN or an official parts catalog reduces the risk of error.

OEM Oil Filter Part Numbers for the 2019 Hyundai Santa Fe

Hyundai recommends specific genuine parts for optimal fit and filtration. These OEM oil filters are engineered for the flow rate and pressure characteristics of the Santa Fe’s engines.

Common Hyundai Genuine Oil Filter Numbers

The list below summarizes the primary OEM spin-on oil filter part numbers commonly specified for the 2019 Santa Fe’s gasoline engines in North America and many other markets.

• 26300-35503: Widely used Hyundai/Kia spin-on oil filter; specified for many 2.4L and 2.0T GDI engines.
• 26300-35505: Updated or superseding number in some catalogs; functionally the same application family as 26300-35503.
• 26300-35504 / 26300-35510 (in some regions): Region- or supplier-variant filters that may replace or supersede 26300-35503 depending on market and production batches.

While these part numbers are broadly correct for most 2019 Santa Fe models, Hyundai occasionally supersedes parts over time, so it’s wise to confirm the latest recommended number via a dealer or official online parts database using your VIN.

Aftermarket Equivalents and Cross-Reference Options

Drivers often choose aftermarket filters for cost savings or availability, provided they meet or exceed OEM specifications. Many brands publish direct cross-reference numbers matching Hyundai’s 26300-35503/35505 family.

Popular Aftermarket Spin-On Oil Filter Equivalents

The following list highlights some widely available aftermarket equivalents commonly cross-referenced to Hyundai’s 26300‑35503/35505 filters. Always verify against your exact engine and local catalog, as part lines can change over time.

• Fram: PH9688 or FS9688 (synthetic media), often listed for 2.4L and 2.0T Hyundai/Kia applications.
• Bosch: 3330 (Premium) or related variants (e.g., DistancePlus where available) for Hyundai 2.4L/2.0T engines.
• WIX: 51334 (standard) and 57334 (XP/high synthetic) for many Hyundai GDI engines.
• Mann-Filter: W 811/80 or regional equivalents commonly cataloged for Hyundai Theta/GDI engines.
• Purolator: PL14459 (PureONE / high efficiency) and L14459 (standard) listed for numerous Hyundai/Kia models.
• Mobil 1: M1-104A in many North American catalogs, targeted at extended-drain synthetic oil users.
• K&N: HP-1004 performance filter often listed for Hyundai 4-cylinder applications.

These cross-references are widely accepted approximations; however, catalog updates, regional variations, and engine-specific nuances mean a quick check on the manufacturer’s website or with a parts counter is still necessary for certainty.

How to Confirm the Correct Oil Filter for Your Specific Santa Fe

Because trim, engine, and regional specifications can vary, confirming the exact filter for your vehicle goes beyond simply knowing the model year.

Steps to Verify Compatibility

The following steps outline how owners can confidently verify the correct filter and avoid fitment or warranty issues.

1. Check the owner’s manual: Look under the maintenance or lubrication section for the recommended oil filter or specification note.
2. Use your VIN: Provide your Vehicle Identification Number to a Hyundai dealer or parts retailer; they can pull the exact OEM part number.
3. Confirm engine size: Verify whether you have the 2.4L, 2.0T, or (if applicable) 3.5L engine; this is usually shown on the under-hood label or vehicle registration.
4. Consult trusted online catalogs: Use official Hyundai parts sites or major aftermarket brand catalogs and cross-check your engine and trim.
5. Inspect the filter on the vehicle: If you are replacing an existing filter, read the part number on the installed unit—especially useful if it is a Hyundai genuine filter.
6. Match gasket size and thread: When in doubt, compare the new filter’s diameter, sealing gasket, and thread size with the old one before installation.

Following these steps dramatically reduces the chance of installing an incorrect filter, helping maintain proper oil pressure, filtration, and warranty coverage.

Why Using the Correct Oil Filter Matters

Oil filters are more than simple canisters; their internal design directly affects engine protection and performance. For modern GDI and turbocharged engines like those in the 2019 Santa Fe, this is especially critical.

Key Technical Reasons

The next list outlines why matching the filter to the engine specification is important rather than using “whatever fits.”

• Bypass valve calibration: The bypass pressure is tuned so that in cold starts or very thick oil conditions, oil still flows without starving the engine.
• Anti-drainback valve quality: Prevents oil from draining out of the filter when the engine is off, reducing wear during startups.
• Filtration efficiency: Correct filters balance micron rating with flow so that contaminants are trapped without choking oil supply.
• Housing strength and sealing: Proper dimensions and gasket design prevent leaks and allow correct torque without damage.
• Compatibility with oil-change intervals: Higher-quality filters are designed to last for the full recommended interval, especially with synthetic oil.

Using the specified or a high-quality equivalent filter ensures the engine’s lubrication system performs as Hyundai intended, particularly important for turbocharged and direct-injection engines prone to deposit formation.

Practical Recommendations for Owners

For most 2019 Hyundai Santa Fe owners, a simple approach to oil filter choice can balance cost, performance, and peace of mind.

Owner-Focused Best Practices

The following recommendations help owners choose confidently and maintain their Santa Fe’s engine health.

• Stick with Hyundai OEM if under warranty: Using genuine filters (e.g., 26300‑35503/35505) simplifies any warranty discussions.
• Choose reputable aftermarket brands: If going aftermarket, select well-known names (WIX, Mann, Purolator, Bosch, Mobil 1, K&N) and the exact cross-referenced part number.
• Follow the oil-change interval: Comply with Hyundai’s time/mileage schedule, especially under “severe service” conditions.
• Pair the filter with the correct oil spec: Use oil meeting Hyundai’s viscosity and API/ILSAC requirements (commonly 5W-20 or 5W-30 full synthetic, depending on engine and region).
• Record part numbers and receipts: Keep a log of filters and oil used; this helps with future service and any potential warranty claims.

By combining the right filter with correct oil and intervals, owners can significantly extend the life and reliability of their 2019 Santa Fe’s powertrain.

Summary

A 2019 Hyundai Santa Fe equipped with the common 2.4L or 2.0L turbo gasoline engine typically uses a Hyundai genuine spin-on oil filter from the 26300‑35503/26300‑35505 family, with numerous high-quality aftermarket equivalents available. The precise filter can vary slightly by engine and market, so confirming via the VIN, owner’s manual, or a trusted parts catalog is essential. Using the correct, quality filter—OEM or reputable aftermarket—helps ensure proper oil flow, filtration, and long-term engine protection for your Santa Fe.