2017 Honda CR-V: The Correct Engine Oil Type and Capacity

Use 0W-20 full-synthetic motor oil that meets API SP and ILSAC GF-6 for all 2017 Honda CR-V models; capacity is about 3.7 qt (3.5 L) with filter for the 1.5L turbo and about 4.6 qt (4.4 L) with filter for the 2.4L non-turbo. This viscosity is Honda’s factory specification for optimal cold-start protection and fuel economy, and the Maintenance Minder system should guide the change interval.

What Oil Does Honda Specify?

Honda specifies 0W-20 for the 2017 CR-V, regardless of whether your vehicle has the 1.5L turbocharged engine (L15B7) or the 2.4L non-turbo (K24W). While “Honda Genuine Motor Oil 0W-20” is recommended, any equivalent premium full-synthetic that meets current certification standards is acceptable and will protect the engine properly.

The following points clarify the minimum standards your oil should meet before you pour it into a 2017 CR-V:

• Viscosity: 0W-20 year-round.
• Type: Full synthetic (strongly recommended by Honda and industry practice for this engine family).
• Certifications: API SP and ILSAC GF-6 (these supersede older SN/GF-5 specs and address timing-chain wear and LSPI concerns).
• Energy conserving: Look for “Resource Conserving” or GF-6 labeling to maintain fuel economy and compatibility.

Meeting these specifications ensures proper protection, cold-start performance, and compliance with Honda’s design targets for the CR-V’s engines.

Capacity and Filter Details

Both engines use the same 0W-20 grade, but the fill quantity differs. Always check the dipstick after filling and running the engine briefly, then top up to the upper mark as needed.

Here are the typical fill capacities for the 2017 CR-V when changing oil and filter:

• 1.5L Turbo (L15B7): about 3.7 US qt (3.5 L) with filter; about 3.4 qt (3.2 L) without filter.
• 2.4L Non‑turbo (K24W): about 4.6 US qt (4.4 L) with filter; about 4.3 qt (4.1 L) without filter.
• Drain plug torque: 29 lb‑ft (39 N·m); always install a new 14 mm aluminum crush washer.
• Oil filter: Use a Honda OEM spin‑on filter or a high‑quality equivalent designed for this application.

Small variations can occur from residual oil; use capacity as a guide, then verify on the dipstick with the vehicle on level ground.

Oil Change Interval and Driving Conditions

Follow the Maintenance Minder on the instrument panel, changing oil when it reaches 15% oil life or sooner if advised by severe service conditions. In typical mixed driving, that’s often around 7,500–10,000 miles (12,000–16,000 km) or 12 months, whichever comes first.

Change oil more frequently if your driving routinely falls into these severe-service categories:

• Frequent short trips where the engine doesn’t fully warm up, especially in cold weather.
• Extended idling or stop‑and‑go driving.
• Towing, carrying heavy loads, or hilly/mountainous driving.
• Dusty or dirty environments (unpaved roads, construction zones).
• Repeated high‑speed driving in high ambient temperatures.

Under severe use—particularly in cold climates or with repeated short trips—earlier oil changes help mitigate fuel dilution and moisture accumulation.

Practical Options: Compatible Oils You Can Buy

You don’t have to use a dealer-only product; many mainstream oils meet or exceed Honda’s requirements. Always confirm the bottle shows 0W-20 and API SP/GF-6.

• Honda Genuine 0W‑20 Full Synthetic.
• Mobil 1 Advanced Fuel Economy 0W‑20 (API SP, ILSAC GF‑6).
• Castrol EDGE 0W‑20 or Castrol GTX Full Synthetic 0W‑20 (GF‑6).
• Valvoline Advanced Full Synthetic 0W‑20 (GF‑6).
• Pennzoil Platinum Full Synthetic 0W‑20 (GF‑6).

Any of these, when meeting the cited specifications, will work properly; choose based on availability and preference.

Notes for 1.5L Turbo Owners

Early 1.5L turbo CR‑V models were known for fuel dilution in cold climates during short-trip driving. Honda issued software updates to mitigate this. Using the correct 0W‑20 oil, ensuring the engine reaches full operating temperature regularly, and changing oil earlier under severe conditions are the best practices to maintain engine health.

Quick DIY Checklist

If you change your own oil, these steps help ensure a clean, leak‑free service. Always consult your owner’s manual for model‑specific notes.

1. Warm the engine briefly, then shut off and safely lift/support the vehicle on level ground.
2. Remove the drain plug, replace the crush washer, and torque the plug to 29 lb‑ft (39 N·m).
3. Replace the oil filter; lightly oil the new gasket and hand‑snug per the filter’s instructions.
4. Fill with the approximate capacity for your engine, then start and idle to build pressure.
5. Shut off, wait a minute, check for leaks, and verify the dipstick level; top up as needed.
6. Reset the Maintenance Minder and note the mileage/date for your records.

Disposing of used oil and filters properly at a recycling center or parts store keeps your service eco‑friendly and compliant with local regulations.

Summary

The 2017 Honda CR‑V takes 0W‑20 full‑synthetic oil meeting API SP and ILSAC GF‑6. Expect about 3.7 qt (3.5 L) with filter for the 1.5L turbo and about 4.6 qt (4.4 L) with filter for the 2.4L non‑turbo. Follow the Maintenance Minder for intervals, service earlier in severe conditions, and always use a new crush washer with a properly torqued drain plug.

Which engine oil is best for a Honda CR-V 2018?

What engine oil should I use for a Honda CR-V? The only engine oil types used for Honda CR-V engines are 0w-20 oil and 0w-30 oil. It’s also essential to choose an oil that is synthetic grade. Fully synthetic oil is better for your engine, has a longer life than regular oil, and helps your car reduce fuel consumption.

What type of oil does a 2017 Honda take?

Notes: Synthetic Valvoline. 0W-20.

What kind of oil does a 2017 Honda CR-V take?

What is the Recommended Honda CR-V Oil Type? What is the best oil for the Honda CR-V? The experts agree that the only types of oil suitable for the Honda CR-V engine is 0W-20 and 0W-30 oil. On top of this recommended CR-V oil type, we strongly suggest that you use synthetic oil.

Can I use 5W-30 for Honda CR-V?

Using 5W-30 oil won’t automatically void your warranty, but it may complicate warranty claims if oil-related engine problems occur. Honda specifies 0W-20 oil for optimal performance, and warranty coverage depends on following manufacturer recommendations.