What Oil Does a 2013 Audi A5 2.0T Take?

The 2013 Audi A5 2.0T typically requires a full synthetic engine oil that meets VW 502 00 (or VW 504 00, where available) specifications, most commonly in 5W-40 or 5W-30 viscosity, with 5W-40 being the most widely used in North America and 5W-30 more common in Europe and some long-life service regimes.

Understanding the Official Oil Requirements

Audi (under Volkswagen Group) does not specify oil brands first—it specifies technical standards. For a 2013 Audi A5 with the 2.0T TFSI engine, the critical requirement is that the oil meets Volkswagen’s own approvals, most notably VW 502 00, and in some regions VW 504 00. These approvals ensure the oil can handle high temperatures, turbocharger demands, and extended drain intervals.

Volkswagen/Audi Oil Specifications

Before looking at specific products, it’s essential to understand the internal VW/Audi codes found in your owner’s manual or under-hood sticker. These codes determine whether an oil is suitable for your engine over the long term.

The following list outlines the key VW oil specifications relevant to the 2013 Audi A5 2.0T:

• VW 502 00 – The primary requirement for gasoline engines like the 2.0T in the 2013 A5 in most markets; suitable for normal and spirited driving and standard service intervals.
• VW 504 00 – A more advanced “long-life” spec where applicable, typically used with extended service intervals and low-ash formulations; backward compatible with 502 00 for many applications, but always confirm via the owner’s manual.
• VW 505 00 and VW 507 00 – Primarily for diesel engines; not applicable to the gasoline 2.0T, included here only to avoid confusion.

Together, these specifications define the quality and performance characteristics your oil must meet; for a 2013 A5 2.0T on gasoline, VW 502 00 (or VW 504 00 where explicitly allowed) is the standard to follow.

Recommended Viscosity Grades

Viscosity describes how thick or thin the oil is at different temperatures. For the 2013 Audi A5 2.0T, Audi typically recommends full synthetic 5W-40 as the standard in many markets, with 5W-30 also being used depending on climate, fuel quality, and local service programs.

Main Viscosity Options for the 2013 Audi A5 2.0T

The following list shows the most common viscosity grades suitable for the 2.0T engine, assuming they carry an approved VW certification:

• 5W-40 (full synthetic) – The most commonly used grade for the 2.0T in North America; provides robust protection at high temperatures and under turbocharged loads while still flowing well in cold starts.
• 5W-30 (full synthetic) – Often used in Europe and markets with “long-life” service regimes; when it meets VW 504 00 or 502 00 it offers good protection and slightly improved fuel economy.
• 0W-40 (full synthetic) – Occasionally acceptable if it meets VW 502 00; offers better very-cold start performance but is less commonly specified as the default for this particular model year.

In practice, 5W-40 VW 502 00-approved oil is the safe, widely accepted standard for a 2013 Audi A5 2.0T, with 5W-30 reserved for regions or service plans that explicitly call for it.

Common Approved Oil Brands and Products

While Audi dealers often use OEM-branded oil (such as Audi/VW or Castrol products), many major oil manufacturers sell full synthetic oils that meet the required VW specifications. The critical point is that the exact VW approval (e.g., “VW 502 00”) is printed on the bottle.

Examples of Oils That Typically Meet VW 502 00/504 00

The following list includes examples of commonly available oils (availability varies by country). Always double-check the specific product label and the latest datasheet, as formulations and approvals can change.

• Castrol EDGE 5W-40 A3/B4 – Frequently carries VW 502 00 approval and is widely used in VW/Audi applications.
• Motul 8100 X-cess Gen2 5W-40 – Designed for high-performance European engines; selected variants meet VW 502 00.
• Liqui Moly Top Tec or High Tech 5W-40 – Several Liqui Moly products are specifically formulated for VW/Audi and list VW 502 00 on the label.
• Mobil 1 FS 0W-40 or 5W-40 (where VW 502 00 approved) – Some Mobil 1 variants carry VW 502 00; this is product- and region-specific.
• Shell Helix Ultra / Pennzoil Platinum Euro 5W-40 or 5W-30 – Many “Euro” formulations meet VW 502 00 or 504 00.

These examples illustrate the range of suitable oils; the essential step is confirming VW 502 00 (or 504 00, if your regional manual allows it) on the bottle before use.

Oil Capacity and Change Interval

Knowing the correct amount of oil and how often to change it is just as important as choosing the right type. The 2.0T TFSI engine in the 2013 Audi A5 is turbocharged and sensitive to oil quality and maintenance intervals.

Approximate Fill Capacity and Service Timing

The list below summarizes the typical capacity and service interval guidelines; these can vary slightly by engine code and region, so they should always be checked against your owner’s manual or dealer information.

• Oil capacity (with filter) – Approximately 4.6–5.0 liters (around 4.9–5.3 US quarts), depending on exact engine code and residual oil; always verify via dipstick after filling.
• Standard interval (USA/Canada, time-based) – Often 10,000 miles (16,000 km) or 12 months under normal conditions, with VW 502 00 oil.
• Severe service recommendation – Many independent specialists suggest 5,000–7,500 miles (8,000–12,000 km) changes for turbo engines driven hard or in extreme conditions.
• Long-life interval (certain European markets) – Up to 30,000 km or two years with VW 504 00 “LongLife” oil, if the car is configured for variable service intervals.

Using the correct VW-approved oil and staying within appropriate change intervals helps protect the turbocharger, reduce sludge formation, and maintain engine longevity.

Where to Confirm the Exact Specification for Your Car

Although the general answer is clear—VW 502 00 full synthetic, typically 5W-40—it is still important to cross-check details for your specific vehicle, especially if it has regional differences or previous modifications.

Best Sources to Verify Your Oil Requirements

The following list highlights practical ways to verify the precise oil spec for your own 2013 Audi A5 2.0T:

• Owner’s manual – The first and most authoritative reference; look for the section on engine oil, where VW 502 00 (and possibly 504 00) will be listed.
• Oil-cap or under-hood labels – Some vehicles have a label indicating the required VW standard or viscosity.
• Audi dealer or service department – Can look up your vehicle by VIN and confirm the recommended oil standard and change interval for your market.
• Official Audi/VW technical literature – Online portals or PDFs sometimes detail oil requirements by model year and engine code.

Cross-referencing these sources ensures that the oil you choose is fully compatible with your specific version of the 2.0T engine and its service program.

Key Takeaways

For a 2013 Audi A5 2.0T, the essential requirement is a full synthetic engine oil that meets VW 502 00 (or VW 504 00 where explicitly specified), most commonly in 5W-40 viscosity, with 5W-30 also used in some markets and service regimes. Oil capacity is roughly 4.6–5.0 liters with filter, and change intervals typically range from 10,000 miles (16,000 km) under standard conditions to shorter intervals for severe use, or longer where long-life servicing and VW 504 00 oil are specified.