What oil filter do I need for a 2009 Honda Fit?
For a 2009 Honda Fit, the correct oil filter is the Genuine Honda 15400-PLM-A02 (which superseded 15400-PLM-A01). Many Honda dealers now also supply 15400-RTA-003 as the current replacement; either fits the 1.5L L15 engine. Common aftermarket equivalents include WIX 51356, Fram PH7317 (or XG7317), Mobil 1 M1-110A, Purolator PL14610, and Bosch 3323.
Contents
What fits and why it matters
The 2009 Fit (GE chassis, 1.5L L15A7) uses Honda’s common M20 x 1.5 threaded spin-on filter with a gasket diameter around 2.47 inches. This is the widely used “14610/7317” size across many Hondas. Staying within this family ensures proper sealing, bypass valve function, and anti-drainback performance. Using an OEM or quality aftermarket filter helps maintain correct oil pressure and start-up protection.
Genuine Honda part numbers that work
Below are OEM part numbers you’re most likely to encounter at Honda parts counters or trusted retailers. Availability can vary by region, and Honda occasionally supersedes part numbers, so you may see more than one valid option.
- 15400-PLM-A02 — Current common OEM filter for many Honda 4‑cylinders; direct fit for 2009 Fit.
- 15400-PLM-A01 — Earlier version, superseded by A02 but still fits if you find existing stock.
- 15400-RTA-003 — Often supplied by dealers today as the active supersession; also a correct fit.
Any of the above OEM filters will fit and function correctly on the 2009 Fit’s L15 engine. If you’re buying from a Honda dealer, provide your VIN and they’ll supply the latest superseding part.
Aftermarket cross‑reference options
If you prefer aftermarket, the following filters are well-known equivalents to the Honda OEM filter size and specs. Choose reputable brands and, when possible, their premium lines for better media and longer service life.
- WIX 51356 (NAPA Gold 1356)
- Fram PH7317 (or upgraded XG7317 “Ultra”)
- Mobil 1 M1-110A
- Bosch 3323 (or Bosch DistancePlus/Performance equivalent)
- Purolator L14610, PL14610 (BOSS: PBL14610)
- SuperTech ST7317
- K&N HP-1010 (or PS-1010)
- Denso 150-1003
These part numbers are for the taller “14610/7317” size commonly recommended for the Fit; the shorter “14612/6607” size also threads on but offers less media and is typically not preferred unless clearance is an issue.
Service notes and best practices
A few quick checks will help ensure a clean, leak-free oil filter installation and protect the engine. The points below reflect common Honda specifications and good shop practice.
- Lightly oil the new filter’s rubber gasket before installation.
- Spin on until the gasket seats, then tighten 3/4 turn by hand (or torque to about 12 N·m / 9 lb‑ft if using a torque tool and the filter specifies it).
- Verify the old gasket came off with the old filter to avoid double-gasketing.
- Replace the drain plug crush washer and torque the drain plug to about 29 lb‑ft (39 N·m).
- After start-up, check for leaks and confirm oil level after a brief warm-up.
Following these steps will help the new filter seal properly, prevent drips, and maintain correct oil pressure from the first restart.
How to double‑check fitment
For absolute certainty—especially given ongoing supersessions—match the filter by VIN with a Honda dealer or verify against your owner’s manual. Reputable online parts catalogs will also confirm fitment for the 2009 Fit (GE) with the 1.5L engine.
Summary
The safe bet for a 2009 Honda Fit is the Genuine Honda 15400-PLM-A02, with 15400-RTA-003 commonly supplied as a current replacement; both fit correctly. Quality aftermarket equivalents include WIX 51356, Fram PH7317/XG7317, Mobil 1 M1-110A, Purolator PL14610, and Bosch 3323. Verify by VIN if in doubt, and follow proper installation torque and gasket practices for a leak-free change.
What oil filter does a 2009 Honda Fit take?
Original Equipment Honda Engine Oil Filter 15400-PLM-A02.
What size is a Honda oil filter?
There is no single Honda oil filter size, as sizes vary by vehicle model and year, but the Genuine Honda 15400-PLM-A02 is a common OEM filter for many Honda and Acura models. To find the correct oil filter for your vehicle, you must check your owner’s manual or use an online parts finder by providing your vehicle’s specific year, make, and model.
How to Find the Correct Oil Filter Size
- 1. Owner’s Manual: The most reliable way to find the correct oil filter part number is to check the owner’s manual for your specific Honda vehicle.
- 2. Online Parts Finders: Use online resources from auto parts retailers or Honda parts specialists. You will typically enter your vehicle’s year, make, and model to get a list of compatible filters.
- 3. Specific Part Numbers:
- The Genuine Honda 15400-PLM-A02 (or 15400PLMA02) is a very common filter that fits many Honda and Acura models from the early 2000s to recent years.
- However, it replaces other part numbers, such as 15400-P0H-305, 15400-PLC-003, and 15400-RBA-F01, so always verify the part number for your specific vehicle.
- 4. Aftermarket Brands: When using aftermarket filters, ensure the product listing confirms it is vehicle-specific for your Honda.
Example: Honda’s 15400-PLM-A02
This is a standard-grade oil filter with the following specifications for many applications:
- Thread Size: M20-1.50
- Height: Approximately 3-3/8 inches
- Bypass Valve: Included
- Anti-Drainback Valve: Included
What is the oil filter number for a Honda Fit?
The Honda Fit oil filter part number is 15400-PLM-A02. This is a genuine Honda part, and is often the same filter installed by Honda dealerships, according to Advance Auto Parts. You can also find it under the name “Honeywell”.
How do I know what oil filter will fit my car?
Check your car’s owner manual
The first step in choosing the right engine oil filter for your car is to consult your car’s owner manual. The manual provides specific recommendations for the type and size of the oil filter that is compatible with your car’s engine and oil system.
