Which Oil Filter Fits a 2014 Honda Odyssey?

The correct oil filter for a 2014 Honda Odyssey (3.5L V6) is the Genuine Honda 15400-PLM-A02, with the current Honda supersession commonly sold as 15400-PL2-505; widely available aftermarket equivalents include Fram PH7317/XG7317, Purolator L14610/PL14610/Boss PBL14610, WIX 51356/57356, Bosch 3323, and Mobil 1 M1-110A. This Odyssey uses the common Honda/Nissan “7317/14610” filter size with M20×1.5 threads.

OEM (Genuine Honda/Acura) Filter Numbers

Honda has used a few part numbers for the same fitment over the years. Dealers may supply whichever current number supersedes prior versions, but all below fit the 2014 Odyssey’s J35 V6.

• 15400-PLM-A02 — Legacy OEM number widely specified for Honda V6 applications in this era.
• 15400-PLM-A01 — Earlier equivalent; often listed as superseded by A02.
• 15400-PL2-505 — Newer Honda packaged filter that supersedes prior numbers at many dealerships; fully compatible.
• HAMP (Honda Access) H1540-RTA-505 — Honda-affiliated performance/service line, also compatible.

Any of the above OEM-labeled filters will fit and function correctly. Availability varies by region and dealership stocking; the PL2-505 is commonly supplied today.

Aftermarket Cross-References (Direct Fits)

These aftermarket filters match the Odyssey’s common Honda “7317/14610” spec. Brands often offer two lengths: the longer “14610/7317” and shorter “14612/6607.” Both fit; the longer version typically provides more filter media.

• Fram: PH7317 (Extra Guard), XG7317 (Ultra)
• Purolator: L14610 (Classic), PL14610 (PureONE), PBL14610 (BOSS); short options L14612/PL14612
• WIX: 51356 (standard), 57356 (XP); Napa Gold 1356 (WIX equivalent)
• Mobil 1: M1-110A
• Bosch: 3323 (Premium), 3330 often listed as alternate in some catalogs
• K&N: HP-1010 (wrench-off), HP-1002 sometimes cross-listed but 1010 is the typical match
• Royal Purple: 20-820
• Denso: 150-2008

Choose based on availability, filtration performance, and oil-change interval goals; premium synthetic-media filters (e.g., Fram Ultra, WIX XP, Mobil 1, Royal Purple) are a good match for longer intervals when following the Maintenance Minder.

Long vs. Short Filter Options

Most catalogs list both a longer and a shorter canister for this fitment. The longer (e.g., 14610/7317) provides more capacity and is commonly preferred if there’s room (there is on the Odyssey). The shorter (e.g., 14612/6607) is fully compatible and sometimes easier to source.

What to Confirm Before You Buy

While the above part numbers are standard for the 2014 Odyssey, a quick check avoids mix-ups and ensures the best fit for your specific trim and region.

• Thread and size: M20×1.5 thread; standard Honda “7317/14610” family.
• Gasket seating ring matches the engine’s filter pad (the common Honda pattern).
• Packaging/label: OEM boxes may reflect superseded numbers; that’s normal.
• Warranty and interval: If using extended intervals, pick a premium synthetic-media filter rated for those miles/time.
• VIN check: Your dealer can confirm the latest superseding OEM part via your VIN.

These checks help ensure you receive the correct filter and a product that aligns with your maintenance schedule.

Installation Notes

Installing an oil filter on the Odyssey is straightforward. The following reminders help prevent leaks and ensure proper sealing.

1. Verify the old gasket came off with the old filter; clean the mounting surface.
2. Lightly oil the new filter’s rubber gasket with fresh engine oil.
3. Spin on by hand until the gasket contacts the base, then tighten per instructions (typically 3/4 turn by hand). Honda’s torque spec is about 12 lb-ft if using a torque wrench.
4. Start the engine, check for leaks, then recheck the oil level after a minute.

Proper installation ensures a reliable seal and avoids messy drips or under-tightening issues.

Summary

For a 2014 Honda Odyssey, use a Genuine Honda 15400-PLM-A02 (or the current superseding 15400-PL2-505). Quality aftermarket equivalents include Fram PH/XG7317, Purolator L/PL/PBL14610, WIX 51356/57356, Bosch 3323, and Mobil 1 M1-110A. Both the long (14610/7317) and short (14612/6607) sizes fit; the longer canister is generally preferred for capacity. Always verify fitment with your VIN or parts catalog and follow proper installation steps.

How do I know which oil filter to get?

To determine the correct oil filter, first, consult your vehicle’s owner’s manual for specifications. You can also use online tools on auto parts websites or enter your vehicle’s year, make, model, and engine size to find a compatible filter. Finally, choose a reputable brand and consider a synthetic media filter if you use synthetic oil to ensure proper filtration and engine protection.
 
Step-by-Step Guide to Finding Your Oil Filter

1. 1. Check Your Owner’s Manual: Your vehicle’s owner’s manual is the most reliable source for the correct oil filter specifications for your specific car model. 
2. 2. Use Online Tools: Many auto parts websites and brands, like WIX Filters, offer tools where you can input your vehicle’s year, make, and model to find compatible filters. 
3. 3. Visit an Auto Parts Store: You can take this information to your local auto parts store and ask for assistance. They will be able to look up the correct filter for your vehicle. 
4. 4. Cross-Reference the Part Number: If you have the part number from your manual or old filter, you can cross-reference it with different brands to find compatible options. 
5. 5. Consider Engine Specifications and Oil Type: 
   • Engine Size: Different engines require different sizes and types of filters. 
   • Oil Type: If you use synthetic oil, choose a filter with synthetic media, as it provides better filtration for synthetic oil’s characteristics. 
   • Driving Conditions: For extreme driving conditions or towing, a heavier-duty filter might be necessary. 

Key Features to Look For

• Filter Media: The material the filter is made from, such as paper or synthetic media. 
• Anti-Drain Back Valve: This feature prevents oil from draining out of the engine when the car is off, ensuring immediate lubrication on startup. 
• Bypass Valve: The bypass valve ensures that oil can still flow to the engine if the filter becomes clogged or the oil pressure is too high. 
• Brand Reputation: Opt for well-known and reputable brands to ensure the filter’s quality and performance. 

Where is the oil filter on a 2014 Honda Odyssey?

Well. It’s nice that Honda leaves the the plastic shield so you can see it right there. So I’m going to take my oil filter wrench and I’m going to back this off. And it’s going to go counterclockwise.

What number is the Mobil 1 oil filter on a 2014 Honda Odyssey?

M1-110A
Mobil 1 – Oil Filter: Ideal for Synthetic Oil, Protection To 20,000 Miles (Part No. M1-110A)

What kind of oil do I need for a 2014 Honda Odyssey?

Mobil 1 Extended Performance Full Synthetic Engine Oil 0W-20 5 Quart.