Which Oil Filter Fits the Honda Odyssey? An Updated 2025 Guide

For most Honda Odyssey model years sold in North America (1999–2025), the correct oil filter is the Genuine Honda 15400-PLM-A02, which supersedes the older 15400-PLM-A01. This filter fits the 3.5-liter J-series V6 engines used across Odyssey generations and corresponds to the common “7317/14610” aftermarket size. Below, we detail fitment by year, trusted aftermarket equivalents, and key specs to help you buy with confidence.

OEM Fitment by Generation and Year

Honda has kept the Odyssey’s oil filter specification remarkably consistent across generations. The listings below summarize the official Honda part numbers that fit each model-year range.

• 1999–2004 Odyssey (J35A1/A4): 15400-PLM-A01 or 15400-PLM-A02 (A02 is the current supersession)
• 2005–2010 Odyssey (J35A6/A7): 15400-PLM-A02
• 2011–2017 Odyssey (J35Z5/J35Z8): 15400-PLM-A02
• 2018–2020 Odyssey (J35Y6): 15400-PLM-A02
• 2021–2025 Odyssey (J35Y6): 15400-PLM-A02

In practice, Genuine Honda 15400-PLM-A02 is the correct filter for nearly all U.S.-market Odysseys. If in doubt, confirm by VIN with a Honda parts department or your owner’s manual.

Aftermarket Cross-Reference Equivalents

If you prefer aftermarket options, these widely available filters match the Odyssey’s specification (20×1.5 mm thread, Honda/Nissan “7317/14610” size). Choose higher-tier lines for extended intervals or severe service, and always verify application on the box or retailer site.

• Fram: XG7317 (Ultra), TG7317 (Tough Guard), PH7317
• Wix: 57356 (XP premium), 51356 (standard); NAPA Gold: 1356
• Purolator: PL14610 (BOSS/ONE or PureONE, depending on market), L14610 (standard); L14612 is a shorter alternate
• Bosch: 3323 (Premium/DistancePlus variants labeled by retailer)
• Mobil 1: M1-110A
• K&N: HP-1010 or PS-1010
• SuperTech (Walmart): ST7317

These cross-references generally fit all Odyssey model years listed above. Stick with reputable brands and ensure the anti-drainback valve and bypass specifications meet or exceed OEM standards.

Key Specifications and Installation Notes

Knowing the fundamental specs helps you confirm compatibility and install correctly.

• Thread size: M20 x 1.5
• Common size family: “7317/14610” (standard can height ~3.4–3.8 in, varies by brand)
• Gasket OD: about 63 mm (2.5 in), typical for this application
• Bypass valve: typically ~12–18 psi (varies by brand; OEM-spec is acceptable)
• Filter tightening: hand-tighten until gasket contacts, then an additional 3/4 turn; torque about 12 N·m (9 lb-ft)
• Drain plug torque: 39 N·m (29 lb-ft); use a new 14 mm crush washer (Honda P/N 94109-14000)

Lightly oil the new filter’s gasket before installation, verify the old gasket is not stuck to the housing, and check for leaks after startup.

How to Double-Check the Correct Filter for Your VIN

While the Odyssey’s filter spec is consistent, it’s good practice to verify for your exact vehicle—especially if you’re outside North America or have aftermarket modifications.

1. Check your owner’s manual or the under-hood service label for the oil filter specification.
2. Use your VIN on Honda’s official parts site or a dealer’s online catalog to confirm the current superseded part number (expect 15400-PLM-A02).
3. If buying aftermarket, cross-reference the OEM number to the brand’s application guide.
4. Inspect the old filter for size and thread markings before removal if uncertain.

This quick verification helps avoid mix-ups and ensures proper fit and oil pressure characteristics.

About Honda A01 vs. A02 Filters

Both 15400-PLM-A01 and 15400-PLM-A02 are genuine Honda part numbers. The A01 (historically Filtech) was an earlier supplier, while A02 (commonly Fram-built in recent years) is the current standard and supersession. As of 2025, 15400-PLM-A02 is the recommended OEM filter for the Honda Odyssey and meets Honda’s performance requirements.

Summary

The safe choice for nearly every Honda Odyssey (1999–2025) is the Genuine Honda 15400-PLM-A02 oil filter. It matches the common 7317/14610 size, with many quality aftermarket equivalents such as Fram XG7317, Wix 57356, Purolator PL14610, Bosch 3323, and Mobil 1 M1-110A. When in doubt, confirm by VIN, follow proper torque specs, and use a new crush washer at each oil change.

What type of oil filter does a 2014 Honda Odyssey take?

aFe Power Oil Filter 44-LF016.

What oil filter do Hondas use?

Genuine Honda 15400-PLM-A02 Oil Filter.

What kind of oil filter for 2016 Honda Odyssey?

The recommended oil filter for a 2016 Honda Odyssey with the 3.5L V6 engine is the Genuine Honda 15400-PLM-A02 (or its equivalent from other brands like Mobil 1 M1-110A or K&N HP-1010). It’s a spin-on type filter, and it’s best to use the original equipment filter or one that meets the same specifications, according to Coggin Honda Saint Augustine. 
Details:

• Genuine Honda: The factory-recommended filter is the 15400-PLM-A02. 
• Equivalent Brands: Mobil 1 (M1-110A) and K&N (HP-1010) offer compatible filters. 
• Spin-on Type: This means it screws onto a threaded post on the engine. 
• Anti-drain Back Valve: The filter includes this valve to prevent oil from draining back into the pan when the engine is off, ensuring quicker lubrication on startup. 
• Filter Media: High-quality media (synthetic or cellulose blend) is used to trap contaminants and maintain oil flow. 
• Gasket: A high-temperature nitrile gasket helps seal the filter to the engine. 
• Height/Diameter: The filter is approximately 3.125 inches tall and 2.688 inches in diameter. 

What is the oil filter number for a 2007 Honda Odyssey?

The 2007 Honda Odyssey oil filter number is 15400-PLM-A02. This is a genuine Honda part and is often referred to as the Honeywell oil filter. It is also compatible with other Honda models, including some from 2000-2021.