What rims will fit a Honda Odyssey?

Most Honda Odyssey models use a 64.1 mm hub bore and medium-high positive offsets; the key difference is bolt pattern by generation: 1999–2004 use 5×114.3, while 2005–present (through 2025) use 5×120. In practice, OEM diameters range from 16–19 inches depending on year, with widths typically 6.5–7.5 inches and offsets around +45 to +55. Match the bolt pattern and center bore, stay within safe width/offset ranges, and ensure adequate load rating and brake clearance for a proper fit.

Fitment essentials at a glance

Understanding the core specifications ensures you select wheels that mount correctly, clear the brakes and suspension, and preserve safe handling. Below are the fundamental parameters that govern Odyssey wheel fitment.

• Bolt pattern: 5×114.3 (1999–2004), 5×120 (2005–2025)
• Center bore: 64.1 mm (hub-centric; larger-bore aftermarket wheels require 64.1 mm hub-centric rings)
• Lug nut/thread: M12x1.5, 60° conical seat
• Typical OEM offset: +45 to +55 mm (most commonly around +50 to +55)
• Typical width: 6.5–7.5 inches OEM; 7.5–8.5 inches common aftermarket with appropriate offset
• Load rating: Choose wheels ≥ 750 kg (≈1,650 lb) per wheel for minivan duty
• TPMS: Direct sensors on most late models; reuse or program compatible sensors for your specific year

Treat these as baseline constraints: any wheel outside these parameters could require additional parts (e.g., hub rings) or create clearance/handling issues.

Specs by generation/year

The Odyssey’s wheel specs have evolved, primarily in bolt pattern and factory sizes. Use this breakdown to match wheels to your model year more precisely.

• 1999–2004 (2nd gen): 5×114.3; CB 64.1 mm; typical OEM 16×6.5 +50 with 215/65R16
• 2005–2010 (3rd gen): 5×120; CB 64.1 mm; common OEM 16×7 +50 (LX/EX) with 235/65R16; select trims offered 17-inch options
• 2011–2017 (4th gen): 5×120; CB 64.1 mm; typical OEM 17×7 +50 to +55 with 235/65R17; some trims/regions offered 18-inch
• 2018–2025 (5th gen): 5×120; CB 64.1 mm; OEM 18×7.5 +55 with 235/60R18 (most trims) or 19×7.5 +55 with 235/55R19 (upper trims)

Within each generation, special-edition or regional trims may vary slightly, but bolt pattern and center bore remain consistent for each era.

What sizes generally fit safely?

While many diameters and widths can be made to work, staying within proven ranges keeps geometry and load margins intact. The following ranges reflect combinations commonly used without modification when matched to appropriate tires.

• 1999–2004: 16×6.5 to 17×7.5; offsets +45 to +55; tire sizes around 215/65R16 (stock) or 225/60R17
• 2005–2010: 16×7 to 18×8; offsets +45 to +55; tires like 235/65R16 (stock), 235/60R17, or 235/55R18
• 2011–2017: 17×7 to 19×8; offsets +45 to +55; tires like 235/65R17 (stock), 245/60R18, or 235/55R19
• 2018–2025: 18×7.5 to 19×8.5 (common), 20×8–8.5 possible with correct tire; offsets +45 to +55; tires like 235/60R18 (stock), 235/55R19 (stock), or 245/50R20

Very low offsets (e.g., below +35) or wide wheels (e.g., ≥9 inches) can cause fender poke, scrub radius changes, or sliding-door clearance issues on a loaded van. Always test-fit when deviating from OEM-like specs.

Brake clearance notes

Brake caliper size and wheel barrel shape influence minimum wheel diameter. This is particularly important if you want downsized winter wheels.

• 2011–2017 models accept 17-inch wheels without issue; many run 17-inch winter sets.
• 2018–2025 models ship with 18/19-inch wheels; some 17-inch aftermarket designs may physically clear the front brakes, but not all. If attempting 17s, verify barrel clearance with a test fit or template.
• For 2005–2010 and earlier, 16- and 17-inch wheels typically clear OEM brakes.

Wheel design matters: two wheels with the same diameter can differ in inner barrel shape, changing clearance by several millimeters.

Interchange: OEM wheels from other vehicles

Using wheels from related models can be a cost-effective route, provided bolt pattern, center bore, offset, and load rating are appropriate. Here are common donor vehicles that match Odyssey generations.

• For 1999–2004 (5×114.3): Some Honda/Acura 5×114.3 wheels (e.g., Accord, older Pilot/MDX pre-2007) can fit, but verify offset and especially load rating; many sedan wheels are under-rated for minivan duty.
• For 2005–2025 (5×120): Honda Pilot (2009–2022), Ridgeline (2006–2014; 2017–present), and Passport (2019–present) wheels are strong compatibility candidates with similar offsets and 64.1 mm hub bores.

Always confirm load rating and offset on donor wheels; crossover/SUV wheels are more likely to meet the Odyssey’s weight requirements than sedan wheels.

Aftermarket buying checklist

Before clicking “buy,” confirm the following to avoid vibration, interference, or warning lights.

• Correct bolt pattern: 5×114.3 (1999–2004) or 5×120 (2005–2025)
• Center bore and hub rings: 64.1 mm hub; use quality rings if wheel bore is larger
• Offset suitability: Target +45 to +55; adjust for width—wider wheels often need higher offsets to keep inner/outer clearance balanced
• Width and tire match: Choose a tire size that keeps overall diameter near stock to maintain speedometer/ABS accuracy
• Brake clearance: Confirm inner barrel and spoke clearance, especially for 17-inch attempts on 2018–2025 models
• Load rating: ≥ 750 kg (≈1,650 lb) per wheel for safety margin
• TPMS compatibility: Get year-correct sensors or plan to swap/program existing ones
• Lug hardware: Use the correct 60° conical-seat lug nuts; avoid mismatched ball-seat hardware

If in doubt, ask the seller for a test-fit or a fitment guarantee; reputable vendors can provide exact offset/clearance guidance for your trim and suspension.

Common tire pairings for popular wheel sizes

Choosing the right tire size preserves ride quality and speedometer accuracy. These pairings align closely with stock overall diameters for each era.

• 1999–2004: 16×6.5 → 215/65R16 (stock); 17×7–7.5 → 225/60R17
• 2005–2010: 16×7 → 235/65R16 (stock); 17×7–7.5 → 235/60R17; 18×8 → 235/55R18
• 2011–2017: 17×7 → 235/65R17 (stock); 18×8 → 245/60R18; 19×8 → 235/55R19
• 2018–2025: 18×7.5 → 235/60R18 (stock); 19×7.5–8 → 235/55R19 (stock); 20×8–8.5 → 245/50R20

Regional trims and towing packages can shift recommended pressures and load indices; always choose tires with adequate load index for a fully loaded van.

Installation and torque tips

Proper installation helps prevent vibrations and component wear. These best practices apply across all Odyssey model years.

• Clean hub faces and wheel mating surfaces; remove rust to ensure true mounting.
• Use hub-centric rings when needed, and seat the wheel fully before torquing.
• Tighten lug nuts in a star pattern and torque to approximately 94 lb-ft (127 N·m), then re-check after 50–100 miles.
• If using aftermarket lugs, confirm seat type and thread engagement (≥ 7 full turns typical for M12x1.5).

Attention to these details minimizes the risk of vibration, loosening, or rotor warping over time.

FAQs

Can I run 20-inch wheels on an Odyssey?

Yes, many owners run 20×8–8.5 with appropriate offsets and a tire like 245/50R20. Expect firmer ride and higher wheel/tire weight. Ensure load rating and brake/suspension clearance.

Will 17-inch wheels fit a 2018–2025 Odyssey?

Some 17-inch designs can clear, but many won’t due to front caliper clearance. If you want 17s (e.g., for winter), verify with a physical test fit or a manufacturer template before buying.

Can I use sedan wheels on my minivan?

Often not recommended due to lower load ratings and different offsets. Prioritize wheels designed for SUVs/minivans with adequate load capacity.

Do I need new TPMS sensors?

You can transfer OEM sensors to new wheels or purchase compatible sensors programmed for your model year. Frequencies and protocols vary by year; consult a parts catalog or dealer.

Summary

To find rims that fit a Honda Odyssey, match the generation’s bolt pattern (5×114.3 for 1999–2004; 5×120 for 2005–2025) and maintain the 64.1 mm hub bore with appropriate offset (+45 to +55). OEM-like widths (7–8.5 inches) and diameters (16–19 inches, 20-inch possible with care) work well when paired with correct tire sizes. Verify brake clearance—especially for 17-inch attempts on 2018+—and ensure proper load rating, TPMS compatibility, and installation torque for a safe, vibration-free setup.

What rims fit a Honda Odyssey?

The Honda Odyssey typically comes with a range of OE rim sizes, including 16-inch rims, 17-inch rims, 18-inch rims and 19-inch rims.

Are Honda rims interchangeable?

The simplest answer to this question is: it depends. The years of each vehicle vary slightly in the number of lugs as well as the pattern of the bolts. For example, the wheels from a 2003 Honda Accord will fit on a 2006 Honda Civic but not a 2005.

Will Accord wheels fit Odyssey?

No, Honda Accord rims generally will not directly fit a Honda Odyssey due to different bolt patterns. Honda Accords typically use a 5×114.3 bolt pattern, while Honda Odysseys use a 5×120 bolt pattern. 
Here’s why and what you can do:

• Bolt Pattern Differences: The first number indicates the number of lug nuts (5 in this case), and the second number is the diameter of the circle (in millimeters) that the lug nuts sit on. The 5×114.3 of the Accord is noticeably different from the 5×120 of the Odyssey, preventing direct fitment. 
• Adapters: If you absolutely want to use Accord wheels on your Odyssey, you can use wheel adapters to convert the bolt pattern. These adapters bolt onto the Odyssey’s hub and provide a 5×114.3 pattern for the Accord wheels to attach to. 
• Other Considerations: Even with adapters, you’ll need to ensure the center bore (the diameter of the center hole in the wheel) is compatible or that the wheels don’t rub against the brake calipers or other suspension components. 
• Wheel Size: While the bolt pattern is the main issue, also consider the overall wheel diameter and width. If you’re going for a different size than stock, ensure it won’t cause rubbing or affect the speedometer. 
• Alternatives: If you’re looking for wheels for your Odyssey, it’s best to explore options that are specifically designed for the Odyssey or other vehicles with the 5×120 bolt pattern, such as the Honda Pilot or Ridgeline. 

What bolt pattern does a Honda Odyssey have?

The bolt pattern for most modern Honda Odysseys (2005-present) is 5x120mm, while earlier models, such as the 1995-2004 generation, used a 5×114.3mm (or 5×4.5 inch) bolt pattern. It is crucial to confirm the specific bolt pattern for your vehicle’s model year, as well as match the hub bore size (64.1mm for most 5x120mm models) to ensure proper fitment.
 
Bolt Patterns by Generation 

• 1995-2004 Honda Odyssey: 5×114.3mm (or 5×4.5 inches)
• 2005-2025+ Honda Odyssey: 5x120mm

This video explains how to check if a wheel will fit your Honda Odyssey: 58sWheelin N DealinYouTube · Dec 20, 2022
Key Considerations

• Confirm Your Model Year: Bolt patterns can vary significantly between generations, so always verify your vehicle’s specific year before purchasing new wheels. 
• Hub Bore Size: In addition to the bolt pattern, the center hub bore must also match. For 5x120mm Odysseys, this is typically 64.1mm. 
• Hub-Centric Rings: If your new wheels have a larger hub bore, you can use hub-centric rings to fill the gap and ensure the wheel sits correctly on the hub. 
• Don’t Force It: Wheels with a smaller center bore than your hub will not fit, even if they have the correct bolt pattern.