What Type of Oil Does a 2014 Audi Take?

A 2014 Audi typically requires fully synthetic engine oil that meets Volkswagen/Audi specification VW 502 00 (or VW 504 00 for some newer-approval oils), most commonly in a 5W-40 or 5W-30 viscosity, depending on the specific engine. The exact oil type varies by model and engine code, so the owner’s manual and the label under the hood remain the final authority.

Why Oil Type Matters for a 2014 Audi

The 2014 model year covers a wide range of Audi vehicles—from the A3 and A4 to the Q5, A6, S and RS performance models, and TDI diesels—each with different engines and lubrication needs. While many drivers focus only on viscosity, Audis of this era are particularly sensitive to manufacturer approvals such as VW 502 00, 504 00, 505 01, and 507 00. Using the correct fully synthetic oil helps protect turbochargers, manage heat, and prevent sludge or premature wear.

Core Requirement: VW/Audi Oil Specifications

For a 2014 Audi, the most critical factor is that the oil meets the correct VW/Audi specification, not just the viscosity rating. These specifications define performance standards for detergency, high-temperature stability, and compatibility with emissions systems.

The main VW/Audi oil specifications relevant for 2014 Audi models include the following:

• VW 502 00: The most common spec for gasoline (petrol) engines in 2014 Audis; used for normal and high-performance turbocharged engines.
• VW 504 00: Newer long-life spec for some gasoline engines, often used where extended service intervals are allowed and low-ash formulations are required.
• VW 505 01: Used on some older pump–duse (PD) diesel engines; seen less often on 2014 models but still relevant in specific cases.
• VW 507 00: Low-ash, long-life spec for many modern TDI diesel engines equipped with diesel particulate filters (DPF).

Matching the exact VW spec listed in the owner’s manual or on the under-hood sticker is more important than brand alone, as it ensures the oil was tested for your engine’s design and emissions equipment.

Common Viscosity Grades for 2014 Audi Engines

Viscosity describes how thick or thin the oil is at cold and operating temperatures. Audi (and VW) pair viscosity ranges with their specifications, but the approved range may differ depending on climate and engine.

Typical viscosity grades for 2014 Audi models include:

• 5W-40: Very common for VW 502 00–approved oils in North America and Europe; often recommended for many gasoline turbo engines such as the 2.0T and 3.0T.
• 5W-30: Widely used for both VW 502 00 and VW 504 00/507 00 oils; common in newer formulations aimed at fuel economy and emissions systems.
• 0W-40 or 0W-30: Sometimes permitted in colder climates where improved cold-start performance is needed, provided they also carry the correct VW specification.

While multiple viscosities may be approved, the best choice is the one explicitly listed in your car’s documentation for your region’s temperature range.

Gasoline vs. Diesel: Different Requirements

In 2014, Audi sold both gasoline and diesel variants (particularly in Europe and, to a lesser extent, North America). These powertrains do not share the same oil types, especially where diesel particulate filters and low-ash formulations are involved.

Gasoline Engines (TFSI and Naturally Aspirated)

Gasoline-powered 2014 Audis—such as the A4 2.0 TFSI, A6 3.0 TFSI, and many S models—typically require VW 502 00 oil, with some allowing VW 504 00.

Key points for gasoline engines include:

• Specification: VW 502 00 is the baseline requirement; some manuals list VW 504 00 as an approved alternative.
• Viscosity: Common recommendations are 5W-40 or 5W-30 fully synthetic, depending on engine and climate.
• Turbocharged engines: These engines run hot and place high demands on oil; using non-approved or conventional oil can increase the risk of sludge, coking on turbo bearings, and timing chain wear.

If you drive a gasoline 2014 Audi in spirited or high-temperature conditions, sticking to a VW 502 00 5W-40 synthetic is usually the safest general recommendation—subject to what your manual specifies.

Diesel Engines (TDI)

Diesel-powered 2014 Audis, especially those with particulate filters, typically demand low-SAPS (low ash) formulations that protect emissions systems.

For 2014 TDI models, the usual requirements are:

• Specification: VW 507 00 is the primary standard for most modern common-rail TDIs with DPF systems.
• Legacy spec: VW 505 01 may appear on older PD diesels, though these are rare by 2014 in most markets.
• Viscosity: Often 5W-30 fully synthetic, labeled as meeting VW 507 00; some 5W-40 oils may be allowed if explicitly approved.

Using non–507 00 oil on a DPF-equipped TDI can accelerate DPF clogging and may damage emissions components over the long term, even if the engine itself appears to run fine.

Typical Oil Requirements by Popular 2014 Audi Models

Each Audi model and engine combination has its own official recommendation. The following overview highlights common pairings seen across the 2014 lineup, but should not replace checking your specific engine code and manual.

Examples of typical oil specs for popular 2014 Audi models include:

• Audi A3 (2014, where sold):
  Gasoline 1.8/2.0 TFSI – usually VW 502 00, 5W-30 or 5W-40 synthetic;
  Diesels – typically VW 507 00 5W-30.
• Audi A4 / A5 2.0 TFSI:
  Frequently VW 502 00, 5W-40 synthetic as default in many regions; some manuals also list VW 504 00 oils.
• Audi A6 2.0 TFSI / 3.0 TFSI:
  Commonly VW 502 00, with 5W-40 or 5W-30 synthetic depending on climate; some long-life markets may see VW 504 00.
• Q5 2.0 TFSI / 3.0 TFSI:
  Typically VW 502 00, 5W-40 synthetic; some diesel Q5 TDIs use VW 507 00 5W-30.
• Audi S and RS models (e.g., S4, S5, RS5):
  High-performance engines usually require VW 502 00 fully synthetic with 5W-40 or similar; always check manual due to higher temperature operation.
• Audi TDI models (A3 TDI, A6 TDI, Q5 TDI where available):
  Generally VW 507 00, 5W-30 synthetic, especially for DPF-equipped versions.

Because options, regional variations, and engine codes differ, the above combinations are indicative rather than definitive; your car’s documentation remains the precise reference.

How to Confirm the Correct Oil for Your Specific 2014 Audi

Even within a single model year, Audi used different engines and regional calibrations. Verifying the exact requirement for your VIN is essential, especially if you’re servicing the car yourself or buying oil before a service appointment.

To identify the correct oil type for your individual 2014 Audi, follow these steps:

1. Check the owner’s manual: Look for the “Engine Oil” or “Specifications” section, which will list required VW/Audi approvals (e.g., VW 502 00, 507 00) and acceptable viscosities.
2. Inspect the oil-fill cap and under-hood labels: Many 2014 Audis have a sticker or text on the oil cap indicating the required VW specification.
3. Use your VIN with an Audi dealer: A dealer parts department can look up the exact oil spec and sometimes brand recommendation for your engine code.
4. Cross-check with reputable oil manufacturers: Major brands (e.g., Castrol, Mobil, Liqui Moly, Shell) offer online tools where you enter year, make, model, and engine to see VW-approved products.
5. Avoid “universal” or unapproved oils: If a product does not explicitly list VW 502 00, 504 00, 505 01, or 507 00 (as applicable) on the label or data sheet, do not assume it is suitable.

Taking these steps ensures not only that you choose the right type but also that you can demonstrate proper maintenance if warranty or resale questions arise.

Fully Synthetic Oils and Service Intervals

All 2014 Audi models require fully synthetic oil, but service intervals can vary by market and usage pattern. Some regions still promote extended “long-life” intervals, while others have moved toward shorter, fixed schedules.

When planning oil changes for a 2014 Audi, consider the following:

• Service interval type: Some cars are set up for flexible/long-life intervals (often with VW 504 00/507 00 oils), while others use fixed intervals, typically around 10,000 miles (16,000 km) or annually.
• Driving conditions: Frequent short trips, heavy traffic, track use, or towing justify shorter intervals than the maximum stated in the manual.
• Oil consumption: Certain 2.0 TFSI engines of this era are known for potential oil consumption; checking level frequently and topping up with the same spec oil is essential.
• Warranty and record-keeping: Using approved oil and changing it on schedule supports any remaining extended warranties and improves resale value.

While your car’s onboard service indicator offers guidance, many independent Audi specialists recommend changing oil more frequently than the maximum stated intervals, especially on turbocharged engines.

Brand Choices and Practical Buying Advice

Many oil brands produce VW-approved formulations, and Audi’s own branded oil is often co-developed with major suppliers. The key is the approval on the label, not the logo.

When buying oil for a 2014 Audi, consider this approach:

1. Start with the VW spec: Identify whether you need VW 502 00, 504 00, 505 01, or 507 00.
2. Choose viscosity within the approved range: Select 5W-40, 5W-30, or other listed grades that meet your climate and usage.
3. Pick a reputable brand: Castrol EDGE, Mobil 1, Shell Helix, Liqui Moly, Motul, and other well-known brands offer VW-approved synthetics.
4. Verify approvals on the product data sheet: Many bottles list “meets or exceeds” but only some are actually tested and approved; look for explicit VW approval numbers when possible.
5. Buy extra for top-ups: Keep at least one spare liter or quart in the car, especially if you own a turbocharged gasoline model known for occasional consumption.

By prioritizing the official VW approval and correct viscosity, you can safely choose among several reliable brands without compromising engine protection.

Summary

A 2014 Audi generally requires fully synthetic engine oil that meets a specific Volkswagen/Audi approval—most commonly VW 502 00 for gasoline engines and VW 507 00 for modern TDI diesels, often in a 5W-40 or 5W-30 viscosity. The precise requirement depends on the exact model and engine code, so the owner’s manual, oil-cap label, or a VIN-based dealer lookup should always be consulted. Matching the official VW spec is more important than brand choice and is essential for protecting turbochargers, emissions systems, and long-term engine health.

What oil does my 2014 Audi A5 take?

5W-40, 5W-30, 0W-40, 0W-30 (All TEMPS) – If synthetic oil that meets the applicable Audi, Volkswagen oil quality standard with the recommended viscosity grade is not available in your area, be sure to use a viscosity grade suitable for the climate, season, and operating conditions that exist where the vehicle is used.

What oil is recommended for an Audi?

Audi requires high-quality full synthetic oil that meets specific manufacturer specifications, such as the VW 502 00 standard. The most common viscosity grades are 5W-40, 5W-30, and 0W-40, but the exact type and grade depend on the model, engine, and climate. Always check your owner’s manual for the correct oil type. 
Common oil types and viscosity grades

• SAE 5W-40: Often recommended for high-performance models or warmer climates due to its ability to withstand higher temperatures and provide good protection.
• SAE 5W-30: A versatile option suitable for many Audi models in moderate climates, balancing fuel efficiency and wear protection.
• SAE 0W-40 or 0W-30: Ideal for colder climates because of its superior cold-start protection. 

Important considerations

• Use only synthetic oil: Conventional oil is not recommended and can lead to engine damage, sludge buildup, and poor lubrication. 
• Check manufacturer specifications: Always look for the specific approval code (e.g., VW 502 00) on the oil bottle. Using an oil that meets the correct specification is crucial for engine health. 
• Consult your owner’s manual: The owner’s manual is the definitive source for the correct oil type for your specific Audi model and year. 

How much oil does a 2014 Audi 2.0 take?

Engine Oil
Capacity: 4.9 quarts (with filter). After refill check oil level.

What type of oil does a 2014 Audi A4 take?

For most A4 engines, SAE 5W-40 grade motor oils are suitable, offering excellent protection in various temperatures. If this isn’t available, SAE 5W-30 or another motor oil with an alternative viscosity can be used as long as it adheres to Audi’s oil-quality standards.