What type of oil filter does a Honda Pilot take?

Most Honda Pilots (2003–2025) use a spin-on oil filter in the common Honda “7317/14610” size with M20 x 1.5 threads. The genuine Honda part typically supplied is 15400-PLM-A02 (which superseded 15400-PLM-A01), and many catalogs list it for all Pilot generations; some newer listings also show 15400-RTA-003 as an approved equivalent. Aftermarket equivalents include Fram 7317-series, Purolator 14610-series, Wix 57356, Bosch 3323, Mobil 1 M1-110A, and similar. Always verify by VIN or owner’s manual.

The quick spec

The key specifications below describe the physical and functional “type” of oil filter used on Honda Pilot models and what to look for when buying OEM or aftermarket.

• Filter type: Spin-on, full-flow
• Thread: M20 x 1.5
• Common size family: 7317 / 14610 (“long”) — 6607 / 14612 (“short”) also fits but is smaller
• Approx. dimensions (common OEM/aftermarket): ~2.7 in (68–69 mm) diameter, ~3.4 in (86–88 mm) height
• Gasket OD: ~2.45–2.50 in (62–64 mm)
• Internal bypass valve: Yes (typical Honda range roughly low-teens psi)
• Tightening: Hand-tight 3/4 turn after gasket contact, or ~12 N·m (8.7 lb-ft) if using a torque wrench

These specs align with the widely used Honda/Acura V6 filter pattern, ensuring compatibility across Pilot model years as long as the thread and gasket match and there is adequate clearance.

OEM Honda/Acura part numbers

Honda’s genuine oil filter for the Pilot has had minor supplier/part-number changes over time. The entries below summarize what dealer catalogs commonly specify by generation.

• 2003–2015 Pilot (J35A/J35Z V6): 15400-PLM-A02 (supersedes 15400-PLM-A01)
• 2016–2022 Pilot (J35Y6 V6): 15400-PLM-A02 listed by most dealers
• 2023–2025 Pilot (J35Y8 V6): 15400-PLM-A02 commonly specified; some catalogs list 15400-RTA-003 as an approved alternate with the same fit

Because Honda periodically supersedes part numbers and regional inventories can differ, confirm the current part by VIN with a Honda dealer or your owner’s manual.

Aftermarket cross-reference numbers

If you prefer aftermarket, these popular filters match the Honda Pilot’s specification and thread/gasket pattern. Availability varies by retailer and region.

• Fram: PH7317, TG7317, XG7317 (Ultra), FS7317 (Endurance)
• Purolator: L14610, PL14610 (PureONE), PBL14610 (BOSS)
• Wix: 57356; Wix XP: 57356XP
• NAPA Gold: 1356 (made by Wix)
• Bosch: 3323; Bosch DistancePlus: D3323
• Mobil 1: M1-110A
• K&N: HP-1010
• SuperTech (Walmart): ST7317, MP7317
• Royal Purple: 10-2876
• AMSOIL: EA15K13

Shorter versions (e.g., Fram 6607/Purolator 14612 family) will fit the Pilot but offer less media area; the “7317/14610” length is generally preferred when space allows.

How to confirm fitment for your exact Pilot

Because year, trim, and market can affect parts listings, use the steps below to be certain you’re getting the correct filter.

1. Check your owner’s manual for the oil filter specification or Honda part number.
2. Call a Honda parts counter with your VIN to confirm the current superseded OEM number.
3. Use the OEM number to cross-reference on the filter brand’s website or catalog.
4. Compare the removed filter’s thread and gasket size to the new part before installation.

These checks take only a few minutes and help ensure proper oil pressure, sealing, and warranty compliance.

Installation notes and torque

Correct installation prevents leaks and ensures proper oil flow. Follow these practical tips whenever replacing the filter.

• Lightly oil the new filter’s gasket before installing.
• Spin on by hand until the gasket contacts the base, then tighten an additional 3/4 turn; or torque to about 12 N·m (8.7 lb-ft).
• Honda drain plug torque (for reference): ~39 N·m (29 lb-ft) with a new crush washer.
• Start the engine, check for leaks, and recheck the oil level after a few minutes.

Adhering to these steps helps the filter seal correctly and reduces the chance of drips or pressure issues.

Summary

A Honda Pilot takes a spin-on oil filter with M20 x 1.5 threads in the common Honda 7317/14610 size. The OEM part most widely specified is 15400-PLM-A02 (superseding 15400-PLM-A01), with 15400-RTA-003 also appearing in some newer catalogs as an equivalent. Trusted aftermarket matches include Fram XG7317, Purolator PL14610, Wix 57356, Bosch 3323, Mobil 1 M1-110A, and others. Always verify by VIN or owner’s manual to account for supersessions and regional catalog differences.

What kind of oil filter does a 2014 Honda Pilot take?

FRAM Extra Guard Spin-On Canister Engine Oil Filter PH7317.

What is the oil filter number for a 2018 Honda Pilot?

The 2018 Honda Pilot’s oil filter part number is 15400-PLM-A02. This is the Genuine Honda original equipment oil filter. It’s a Honeywell filter and is also compatible with other Honda models.

What oil filter do Hondas use?

Genuine Honda 15400-PLM-A02 Oil Filter.

What oil filter does a Honda Pilot take?

The correct Honda Pilot oil filter type depends on the specific model year of your vehicle; the original equipment manufacturer (OEM) filter part numbers vary, such as 15400-PLM-A02 for 2018-2022 models and 15400-P0H-305 for 2003-2004 models, with others available for different years. Always verify the exact part number for your year by checking a Honda parts website or an auto parts store’s online catalog, which also lists compatible aftermarket filters from brands like Fram, K&N, and ACDelco.
 
How to Find Your Oil Filter Type

1. Check your vehicle’s year and model: Oil filter designs and part numbers change with vehicle generations. 
2. Consult a Honda parts supplier: Use a website like Honda Parts Now and enter your specific vehicle year to see the correct OEM part numbers. 
3. Use an auto parts store catalog: Sites like AutoZone.com and Advance Auto Parts allow you to input your vehicle’s year and model to find compatible oil filters, including OEM and aftermarket options. 

Common OEM Oil Filter Part Numbers 

• 15400-PLM-A02: A common OEM part number found in newer models, such as 2018-2022.
• 15400-P0H-305: Used in earlier models, for example, the 2003-2004 Pilot.

Aftermarket Options
Many reputable brands offer aftermarket filters that fit the Honda Pilot, including: 
Fram, K&N, ACDelco, Mobil 1, STP, and Purolator.
Important Considerations

• OEM vs. Aftermarket: While aftermarket filters are available, using the recommended Honda OEM filter ensures the exact specifications Honda engineers designed for your engine. 
• Filter Fitment: Always confirm that any filter you purchase, whether OEM or aftermarket, is specifically listed for your year and model of Honda Pilot.