Honda City Battery: What You Need and How to Choose
The battery required for a Honda City depends on the model year, engine type (petrol, diesel, or hybrid), and market. Most petrol, non-hybrid Honda City models use a 12V JIS-standard battery around 35–45Ah (commonly 34B19L/36B20L), diesel variants typically use a larger 12V unit around 45–60Ah (often 55B24L), and the City e:HEV hybrid pairs a high-voltage lithium-ion traction battery with a 12V auxiliary battery that is usually AGM in the 45–55Ah range. Most recent Honda City key fobs use a CR2032 coin-cell battery.
Contents
How to Confirm the Correct Battery for Your Honda City
Because specifications vary by generation and region, these steps help you verify the exact battery your car needs.
- Check the owner’s manual: It lists the correct battery size, capacity (Ah), and type (standard flooded, EFB, or AGM).
- Read the existing battery label: Look for JIS codes like 34B19L, 36B20L, or 55B24L; “L” usually indicates left-post positive orientation used by the City in many markets.
- Confirm features: If your City has idle start/stop, use an EFB or AGM battery as specified; non–start/stop cars use standard maintenance-free (SMF) flooded batteries unless otherwise stated.
- Match dimensions and hold-down: Ensure the new battery fits the tray and clamps; do not upsize if it compromises mounting or cable length.
- Consider climate and CCA: Hot climates favor higher heat-resistant designs; colder regions benefit from higher Cold Cranking Amps (CCA).
Following these checks prevents fitment issues and ensures the battery meets your car’s electrical and starting demands.
Typical Battery Specs by Generation and Engine (Asia/India markets)
The Honda City’s battery specification has evolved across generations and powertrains. The points below reflect common fitments seen in India and many ASEAN markets; always validate against your specific vehicle.
- 3rd gen (approx. 2008–2013) petrol: 12V JIS 34B19L (about 35–38Ah, ~330–360 CCA); maintenance-free flooded type is common.
- 4th gen (2014–2019) petrol: 12V JIS 34B19L or 36B20L (roughly 35–40Ah); diesel: 12V JIS 55B24L (typically 45–60Ah, higher CCA).
- 5th gen (2020–present) petrol: 12V JIS 36B20L/40B20L (about 40–45Ah); markets that offered diesel typically used 55B24L or similar capacity.
- City e:HEV hybrid (2022–present): High-voltage lithium-ion traction battery plus a 12V auxiliary battery; the 12V is commonly AGM in the 45–55Ah range and often in a JIS B24L footprint—confirm in the owner’s manual for your market.
These ranges cover the most common setups; trim levels, accessories, and regional specifications can shift the exact capacity and technology (e.g., EFB/AGM for vehicles with idle-stop or hybrid systems).
Key Fob Battery for Honda City
If you were asking about the key fob instead of the car battery, here’s what to know.
- Most 2014–present Honda City smart keys use a CR2032 coin-cell battery.
- Some older keys (pre-2014) may use CR1616 or CR1620; check the engraving inside the fob or the manual.
- To replace: Open the fob case carefully (use a plastic pry tool), note polarity, swap the cell, and snap the case back. Test lock/unlock immediately.
Using the correct coin cell and proper handling prevents damage to the fob and ensures reliable remote functions.
Choosing a Battery Brand and When to Replace
Quality and timing matter for reliability, especially in extreme climates or short-trip driving.
- Brands: Look for reputable makers with strong warranties in your region (e.g., Amaron, Exide, Bosch, Panasonic, Yuasa, Century).
- Replacement cues: Slow cranking, dimming lights at idle, frequent jump-starts, or a battery older than 3–5 years (hot climates skew toward the lower end).
- Match specs: Keep the same or higher Ah and CCA, use the correct technology (SMF/EFB/AGM), and ensure terminal orientation (usually “L”) is correct.
Choosing a well-supported brand and replacing at the first signs of weakness reduces the risk of no-start situations and electrical glitches.
Installation and Setup Tips
Proper installation preserves electronics and ensures safety.
- Record radio presets and window auto-up/down settings; some may need reinitialization after power loss.
- Use memory saver only if recommended; otherwise, follow Honda’s battery disconnect procedure.
- Clean terminals, secure the hold-down, and avoid overtightening posts. Verify charging voltage (typically ~13.8–14.5V with engine running).
A careful install helps the new battery deliver full life and keeps onboard systems functioning normally.
Summary
There isn’t a single universal battery for the Honda City. Most petrol, non-hybrid models use a JIS 34B19L/36B20L (~35–45Ah), diesel variants typically use a larger JIS 55B24L (~45–60Ah), and the City e:HEV hybrid adds a high-voltage pack plus a 12V AGM auxiliary battery (often 45–55Ah). Confirm the exact type in your owner’s manual or by reading your current battery’s label, and note that most recent Honda City key fobs take a CR2032 coin cell.
Which battery is used in Honda City?
Suitable batteries for HONDA City (Petrol) Passengers Vehicles
| AMARON FLO Automotive Battery – 40B20L (AAM-FL-00040B20L) | AMARON GO Automotive Battery – 38B20L (AAM-GO-00038B20L) | |
|---|---|---|
| Total Warranty (Months) | 72 | 60 |
| Free Warranty (Months) | 36 | 30 |
| Pro-rata Warranty (Months) | 36 | 30 |
| Terminal Layout |
How long will the battery last in a Honda City?
between 3 to 5 years
Generally speaking, with proper use and maintenance, the battery can last between 3 to 5 years. However, the actual duration of use can be influenced by factors such as climate conditions, driving habits, and the frequency of use of the vehicle’s electronic devices.
How do I know which battery my car needs?
To find the right car battery for your vehicle, start by consulting your owner’s manual for the recommended BCI group size and other specifications like cold cranking amps (CCA). You can also find this information on the existing battery itself or by using online tools or asking a professional at an auto parts store or dealership.
Here’s a more detailed breakdown:
1. Consult Your Owner’s Manual: This is the most reliable source for your vehicle’s specific battery requirements.
2. Check the Existing Battery: The current battery will likely have the group size and other specifications printed on its label.
3. Use Online Tools: Many auto parts retailers offer online tools where you can input your vehicle’s year, make, and model to find compatible batteries.
4. Consult an Expert: Auto parts professionals or dealership service departments can help you identify the correct battery.
5. Consider CCA and Reserve Capacity:
- Cold Cranking Amps (CCA): This rating indicates how well the battery performs in cold weather.
- Reserve Capacity (RC): This rating indicates how long the battery can power your car’s electrical systems if the alternator fails.
6. Check the Battery Terminals: Ensure the new battery has the correct terminal type and orientation for your vehicle.
7. Be Aware of Special Requirements: Some vehicles with start-stop systems require specific AGM or EFB batteries.
What battery does Honda recommend?
Types of Batteries for Honda Vehicles
Honda vehicles typically require either lead-acid or AGM (Absorbent Glass Mat) batteries.
