Which cylinder is number 2 on a Honda Odyssey?

Cylinder 2 on a Honda Odyssey with the 3.5‑liter V6 (all U.S. models from 1999 to present) is the front-bank cylinder nearest the passenger-side end of the engine—i.e., the radiator side, closest to the passenger-side fender/timing-belt/alternator end. This places it on the “front” row of cylinders, at the outboard (passenger) end when viewed from the front of the van. Below, we detail how Honda numbers cylinders on the Odyssey across generations and how to locate cylinder 2 quickly and accurately.

Odyssey V6 (J35) cylinder numbering

Most Honda Odyssey models sold from 1999 onward use the transverse-mounted J‑series 3.5‑liter V6 (J35). On this engine, the rear bank (toward the firewall/windshield) carries odd-numbered cylinders, and the front bank (toward the radiator/bumper) carries even-numbered cylinders. Therefore, cylinder 2 is on the front (radiator-side) bank.

Bank locations on the transverse V6

Understanding “banks” and orientation makes locating individual cylinders straightforward. Because the engine is mounted sideways (transverse), the “front” bank is the row of cylinders you can see nearest the radiator, and the “rear” bank is tucked closer to the firewall. Bank 1 contains cylinder 1 (rear bank on the Odyssey), and Bank 2 is the front bank.

The following layout describes the cylinder numbering you’ll see when standing at the front bumper looking into the engine bay on a left-hand-drive Odyssey (U.S. market).

• Rear bank (firewall side, Bank 1): 1 = passenger-side end, 3 = middle, 5 = driver-side end
• Front bank (radiator side, Bank 2): 2 = passenger-side end, 4 = middle, 6 = driver-side end

This arrangement means cylinder 2 sits at the front row’s outboard/passenger end. If your market uses right-hand drive, the “passenger side” flips sides of the vehicle, but cylinder 2 remains the front-bank cylinder nearest the timing-belt/alternator end of the engine.

How to quickly find cylinder 2 on a V6 Odyssey

Use these simple steps if you’re tracing a misfire (e.g., code P0302) or replacing a coil/plug.

1. Stand at the front of the vehicle, hood open, facing the engine.
2. Identify the row of three ignition coils or spark plugs closest to the radiator—this is the front bank (Bank 2).
3. At the passenger-side end of that front row, locate the first coil/plug: that is cylinder 2.

If components obstruct your view, follow the front-bank ignition harness: the first connector at the passenger-side end leads to cylinder 2, the middle is cylinder 4, and the driver-side end is cylinder 6.

Model-year exception: 1995–1998 four‑cylinder Odyssey

The first-generation Odyssey (1995–1998) used an inline-four engine. On Honda inline-fours of that era, cylinder numbering runs 1–2–3–4 starting at the timing-belt end (passenger side on U.S. models). In that configuration, cylinder 2 is the second cylinder from the passenger-side end. This is different from the V6 layout but easy to identify once you locate the timing-belt side of the engine.

Related diagnostics and parts notes

Because cylinder 2 is on the front bank, a misfire code P0302 points you to the accessible front-row passenger-side cylinder—typically a quick coil, plug, or injector check. Also note that “Bank 2” oxygen sensors and catalytic converter references correspond to this same front (radiator-side) bank on the Odyssey’s V6.

Summary

On V6 Honda Odysseys (1999–present), cylinder 2 is the front-bank (radiator-side) cylinder closest to the passenger-side fender, at the timing-belt/alternator end. On the earlier 1995–1998 four‑cylinder model, cylinder 2 is the second cylinder from the timing-belt end. Understanding bank orientation (rear bank = odd numbers, front bank = even numbers) makes locating cylinder 2 and related components straightforward.

Where is cylinder 2 on Honda Odyssey?

Information that row of cylinders is going to be called bank. One. And then on the left side of the engine that’s the side of the engine closest to the radiator. You’re going to have cylinders.

What is the firing order of the 3.5 Honda Odyssey engine?

The firing order for the Honda Odyssey is 1-4-2-5-3-6, which ensures the engine health of your vehicle. This firing order also ensures the smooth working of the engine operations of your 3.5-liter V6 engine-based Honda Odyssey.

Which cylinder is number 3 on a Honda Odyssey?

3 Honda Odysseies with the 3.5 L in it don’t quote me on that though uh always verify. But as for this vehicle the ’05 Honda Odyssey.

What is the order of cylinders on a 2012 Honda Odyssey?

The 2012 Honda Odyssey 3.5L V6 engine has cylinders numbered 1-3 on the front bank and 4-6 on the rear.